Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 8 marks

Pick again
Print
1Short recall2 marksWireless Connections Swap Remove

Wireless networks have a limited range.

State two factors that can reduce the range of a wireless network.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Walls/obstacles between the device and the access point (1)
  • Interference from other electrical devices/other devices/other wireless networks (1)
  • Distance from the access point (1)
  • Using a higher frequency band (e.g. 5GHz) (1)
  • Low transmit power of the access point/device (1)

Allow thick walls/furniture for walls/obstacles

Do not accept using more bandwidth

Do not accept a weaker signal without a stated cause

Example answers and how they were marked
Full marks2/2

Walls can block the signal, and moving further from the access point reduces the range.

Why: Gives walls as an obstacle (1) and distance from the access point (1).

Some marks1/2

Interference from other devices.

Why: Gives one valid factor, interference from other devices (1), but no second factor.

No marks0/2

Using more bandwidth reduces the range.

Why: Bandwidth does not reduce range; this is a near-miss listed as Do not accept, so no mark.

2Describe2 marksWired Connections Swap Remove

A school connects its desktop computers to the network using Ethernet cables.

Describe one way that using a wired connection can give a faster transfer of data than a wireless connection.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • (Ethernet) cables are not affected by interference from other devices (1) so data is transferred at a consistent/steady speed (1)
  • Each device has its own cable to the switch (1) so the full bandwidth is available to that device and speeds do not drop as more users join (1)
  • Fibre optic cable has a higher bandwidth than a wireless link (1) so more data can be sent along the cable each second (1)
  • The cable gives a direct/physical path to the switch (1) so data is less likely to be lost and resent, which would slow the transfer (1)

Do not accept responses about security, reliability or users being unable to move around, as these are not about speed.

Do not accept answers that only say a wired/cable connection is faster, or that fibre is faster, without saying why.

Example answers and how they were marked
Full marks2/2

The cable is not affected by interference from other devices such as other networks or microwaves so the data is sent at a steady speed instead of slowing down.

Why: Point that the cable is not affected by interference (1) linked to a consistent data transfer speed (1).

Some marks1/2

Ethernet cables are not affected by interference.

Why: Gives the first point of a linked pair (1) but does not develop it to say how this makes the transfer faster.

No marks0/2

A wired connection is faster because the data travels down a cable and not through the air.

Why: Repeats the question (wired is faster) with no reason, which the mark scheme's final line says is not accepted.

3Explain2 marksPacket Switching Swap Remove

A router connects a home network to the internet.

Explain how a router uses the destination IP address in a packet header.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The router reads the destination IP address (1) so it knows which network/device the packet is for (1)
  • The router looks up the destination IP address in its routing table (1) to find the next router/route for the packet (1)
  • The router forwards the packet to the next router (1) that leads towards that IP address / is on the best route (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept MAC address - routers use the IP address to route packets between networks.

Do not accept 'it finds the exact device' without saying how the router uses the address, e.g. routing table/next router.

Example answers and how they were marked
Full marks2/2

The router looks up the destination IP address in its routing table to find the next router to send the packet to.

Why: Linked point (1) and reason (1): looks up the destination IP address in the routing table to find the next router.

Some marks1/2

It reads the destination IP address.

Why: Reads the destination IP address (1) but gives no linked reason about a routing table or next router.

No marks0/2

It reads the MAC address so it knows which computer sent the packet.

Why: Routers use the IP address to route packets, not the MAC address; no creditworthy point.

4Explain2 marksWireless Connections Swap Remove

A student plays an online game using a laptop connected to the school Wi-Fi.

Explain one reason why an online game can respond more slowly over a wireless connection than over a wired connection.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Wireless signals can be blocked or absorbed by walls (1) so the data must be re-sent, which adds delay (1)
  • A device further from the access point has a weaker signal (1) so data must be re-sent/transmitted at a lower rate, adding delay (1)
  • Devices on a wireless network share a channel (1) so a device must wait its turn to transmit, which adds delay (1)
  • Interference from other devices affects the radio signal (1) so data must be re-sent, adding delay (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'waiting to send' or 'collisions' as the delay caused by devices sharing a channel.

Do not accept 'wireless is slower than wired' on its own, as this repeats the question.

Do not accept a reason that only affects download speed/bandwidth (e.g. 'files take longer to download') without a link to delay.

Example answers and how they were marked
Full marks2/2

Interference from other devices affects the radio signal, so the data has to be re-sent and this adds delay before the player's action appears.

Why: Linked point (1): interference affects the signal; reason (1): re-sending the data adds delay (latency).

Some marks1/2

Walls can block the wireless signal.

Why: Point only (1): walls block the signal. No linked reason saying that this means data must be re-sent, which adds delay.

No marks0/2

Wireless has less bandwidth than wired, so a game update takes longer to download.

Why: Confuses latency with bandwidth/download speed; the mark scheme says not to accept this without a link to delay.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.