Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 6 marks

Pick again
Print
1Multiple choice1 markWireless Connections Swap Remove

A wireless network can use the 2.4 GHz or 5 GHz frequency band.

Identify the advantage of using the 5 GHz band instead of the 2.4 GHz band.

[1 mark]
  • AGreater range
  • BHigher data transfer speed
  • CMore able to pass through walls
  • DUses less bandwidth
Mark scheme
  • B Higher data transfer speed (1)
  • The only correct answer is B. The correct answer is higher data transfer speed.
  • A is not correct because the 2.4 GHz band has the greater range
  • C is not correct because the 2.4 GHz band passes through walls more easily
  • D is not correct because the 5 GHz band does not use less bandwidth
Example answers and how they were marked
Full marks1/1

B Higher data transfer speed

Why: Correct advantage: 5 GHz gives higher data transfer rates (1).

No marks0/1

A Greater range

Why: Greater range is a feature of the 2.4 GHz band, not an advantage of 5 GHz; no mark.

No marks0/1

C More able to pass through walls

Why: 5 GHz signals are less able to pass through walls than 2.4 GHz signals; no mark.

2Short recall2 marksWireless Connections Swap Remove

Wireless connections use radio waves.

Give two reasons why a wireless connection can have a lower speed than a wired connection.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Interference from other electrical/electronic devices (1)
  • Walls/obstacles block or weaken the signal (1)
  • The signal gets weaker the further a device is from the access point (1)
  • Other devices/networks use the same wireless channel/frequency (1)
  • A wireless channel has less bandwidth than a wired connection (1)

Do not accept 'higher latency', because latency is a delay and does not reduce the speed at which data is transferred.

Do not accept 'wireless is slower' / 'wired is faster' without a reason.

Do not accept 'radio waves are slower than signals in a cable' as they travel at the same speed.

Example answers and how they were marked
Full marks2/2

Other electrical devices can cause interference, and walls can block the signal.

Why: Gives interference (1) and walls blocking the signal (1).

Some marks1/2

Walls can block the wireless signal.

Why: Gives one valid reason, walls blocking the signal (1), but no second reason.

No marks0/2

Wireless is slower because it has a higher latency, so the data takes longer to arrive.

Why: Confuses latency (a delay) with speed; 'higher latency' is not accepted and no other creditworthy reason is given.

3Short recall1 markWired Connections Swap Remove

Wired connections have characteristics that affect network performance.

State what is meant by the range of a wired network connection.

[1 mark]
Mark scheme

Award one mark for:

  • The maximum distance data/a signal can be transmitted before it becomes too weak to be received (1)

Allow 'how far a signal can travel'.

Do not accept the number of devices that can be connected to the network.

Do not accept the speed at which data is transmitted.

Do not accept bandwidth/the maximum capacity of a channel.

Do not accept latency/the delay between a signal being sent and received.

Example answers and how they were marked
Full marks1/1

The maximum distance a signal can be transmitted before it becomes too weak to be received.

Why: Gives the maximum distance a signal can be transmitted before it becomes too weak, which is the creditworthy point (1).

No marks0/1

The maximum capacity of the connection.

Why: This describes bandwidth, which the mark scheme says not to accept for range, so no mark.

No marks0/1

The delay between a signal being sent and received.

Why: This describes latency/delay, which the mark scheme says not to accept for range, so no mark.

4Explain2 marksAddressing Swap Remove

Data is split into packets before it is sent over the internet.

Explain why each device that receives packets over the internet needs a unique IP address.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Data/packets are delivered to the correct/intended device (1) because the destination IP address identifies that device, so a duplicate address would mean packets could be delivered to the wrong device (1)
  • Replies are sent back to the device that requested the data (1) because the sender's IP address identifies that device, so a duplicate address would mean the reply could be sent to the wrong device (1)
  • The device can be identified separately from other devices (1) so packets are not delivered to a different device that has the same address (1)

For both marks, the expansion must follow/associate with the statement.

Award one mark for a valid point and a second mark only for a linked reason explaining why a duplicate address would cause a problem.

Do not accept 'it is unique'/'it has its own address' as a point, as this repeats the question.

Do not accept 'so it can connect to the internet' or 'so it can be found' on its own without a link to data/packets being delivered to the correct device.

Allow 'data' for 'packets'.

Example answers and how they were marked
Full marks2/2

Packets are delivered to the correct device because the destination IP address identifies one device, so if two devices had the same address packets could be sent to the wrong one.

Why: Point that packets reach the correct device (1) and linked reason that a duplicate address would cause misdelivery (1).

Some marks1/2

Packets are sent to the correct device because it has its own IP address.

Why: Valid point that packets reach the correct device (1), but the reason only restates uniqueness and does not explain how a duplicate address would cause a problem, so no second mark.

No marks0/2

So that it can connect to the internet.

Why: No link to packets/data being delivered to the correct device; the mark scheme rejects a connection statement on its own.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 65
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 12 questions

5.3 Cybersecurity

Malware 8 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.