Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

3 questions · 5 marks

Pick again
Print
1Multiple choice1 markWireless Connections Swap Remove

A wireless network can use the 2.4 GHz or 5 GHz frequency band.

Identify the advantage of using the 5 GHz band instead of the 2.4 GHz band.

[1 mark]
  • AGreater range
  • BHigher data transfer speed
  • CMore able to pass through walls
  • DUses less bandwidth
Mark scheme
  • B Higher data transfer speed (1)
  • The only correct answer is B. The correct answer is higher data transfer speed.
  • A is not correct because the 2.4 GHz band has the greater range
  • C is not correct because the 2.4 GHz band passes through walls more easily
  • D is not correct because the 5 GHz band does not use less bandwidth
Example answers and how they were marked
Full marks1/1

B Higher data transfer speed

Why: Correct advantage: 5 GHz gives higher data transfer rates (1).

No marks0/1

A Greater range

Why: Greater range is a feature of the 2.4 GHz band, not an advantage of 5 GHz; no mark.

No marks0/1

C More able to pass through walls

Why: 5 GHz signals are less able to pass through walls than 2.4 GHz signals; no mark.

2Short recall2 marksLANs & WANs Swap Remove

A school has computers in every classroom.

Define the term 'local area network (LAN)'.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • A network that covers a small geographical area / is on a single site / is within one building (1)
  • (Two or more) computers/devices connected together (1)
  • So that the connected devices can share data/files/resources such as printers or an internet connection (1)
  • Uses cabling/infrastructure owned by the organisation (1)

Do not accept a network that covers a large geographical area / connects networks in different countries, as this describes a WAN.

Do not accept 'a network in a school' on its own, as this repeats the stem without a LAN feature such as a single site or connected devices.

Do not accept 'a network that connects to the internet' without a LAN feature such as a single site or connected devices.

Do not accept 'owned by one organisation' on its own, as a WAN can also be owned by one organisation.

Do not accept 'local' on its own without saying what it means.

The share mark needs the sharing to be linked to the connected devices/network, e.g. 'share files' or 'share printers'.

Example answers and how they were marked
Full marks2/2

A LAN is a group of computers connected together on one site, such as a school, so that they can share files and printers.

Why: Connected together (1) and single site (1); the sharing point is also made but the maximum is two marks.

Some marks1/2

A network that is in one building.

Why: Covers a single site/one building (1) but does not say that devices are connected together or what they share.

No marks0/2

A network that covers a large area and connects different countries.

Why: Describes a WAN, not a LAN, so no creditworthy LAN point is made.

3Describe2 marksWireless Connections Swap Remove

A network can use wired connections or wireless connections.

Describe why a wireless connection can have a higher latency than a wired connection.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Interference from other devices corrupts the wireless signal (1) so the data has to be resent, which increases the delay (1)
  • Devices on a wireless network take turns to use the same channel/frequency (1) so a device may have to wait for the channel to be free before it can transmit, which adds to the delay (1)
  • Data on a wireless connection must pass through the access point to reach the wired network (1) so the extra processing/conversion at the access point adds a delay (1)

Do not accept responses that only state that a wireless connection is slower/less reliable than a wired connection, without explaining how this adds latency.

Do not accept 'data is sent through the air' on its own, as this does not explain why latency is higher.

Do not accept responses about bandwidth or speed on their own.

Example answers and how they were marked
Full marks2/2

Interference from other devices can corrupt the wireless signal, so the data has to be resent, which increases the delay.

Why: Linked point: interference corrupts the signal (1), developed by the delay caused by resending the data (1).

Some marks1/2

Wireless signals can be corrupted by interference from other devices.

Why: The point that interference corrupts the wireless signal (1) is given, but there is no development of how this leads to a delay.

No marks0/2

Wireless is slower than a wired connection, so it has a higher latency.

Why: Only states that wireless is slower, without explaining how this adds latency, so it is not accepted.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.