Edexcel GCSE Computer Science (1CP2) Exam Questions

• B Higher data transfer speed (1)
• The only correct answer is B. The correct answer is higher data transfer speed.
• A is not correct because the 2.4 GHz band has the greater range
• C is not correct because the 2.4 GHz band passes through walls more easily
• D is not correct because the 5 GHz band does not use less bandwidth

Award one mark for any of the following up to a maximum of two marks:

• A network that covers a small geographical area / is on a single site / is within one building (1)
• (Two or more) computers/devices connected together (1)
• So that the connected devices can share data/files/resources such as printers or an internet connection (1)
• Uses cabling/infrastructure owned by the organisation (1)

Do not accept a network that covers a large geographical area / connects networks in different countries, as this describes a WAN.

Do not accept 'a network in a school' on its own, as this repeats the stem without a LAN feature such as a single site or connected devices.

Do not accept 'a network that connects to the internet' without a LAN feature such as a single site or connected devices.

Do not accept 'owned by one organisation' on its own, as a WAN can also be owned by one organisation.

Do not accept 'local' on its own without saying what it means.

The share mark needs the sharing to be linked to the connected devices/network, e.g. 'share files' or 'share printers'.

Award one mark for any of the following up to a maximum of two marks:

• Faster transmission speed (1)
• Higher bandwidth (1)
• Lower latency (1)
• Not affected by interference (from other devices/walls) (1)
• No blind spots/not affected by distance from the wireless access point (1)

Do not accept benefits of wireless connections, e.g. users can move around the building with their devices

Do not accept 'easier to set up' or 'does not need a password' as these are not about network performance

Award up to two marks for a linked explanation such as:

• The receiver can put the packets back into the correct order (1) because packets may arrive out of order/take different routes (1)
• The receiver can see if a packet is missing (1) because the sequence of numbers shows a gap (1)
• The receiver knows when the whole file has arrived (1) because the total number of packets/last packet number is known (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'so the packets can be put back in the correct order/reassembled' for the first mark, but the second mark needs the reason, i.e. packets may arrive out of order/take different routes.

Do not accept 'so the packets can be identified' without stating what the number is used for, e.g. reordering or spotting a missing packet.

Do not accept 'so the router knows where to send it' - the router uses the destination IP address, not the packet number.

Award up to two marks for a linked explanation such as:

• Splits the data/file into packets (1) so each packet can be sent separately across the network (1)
• Adds a packet/sequence number to each packet (1) so the packets can be put back into the correct order at the destination (1)
• Detects lost/missing packets (1) so they can be requested/resent (1)
• Creates a connection between the two computers/hosts (1) before the file is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'segments' for 'packets' (TCP divides the data into segments, which become packets at the internet layer).

Do not accept 'sends the data/file' on its own without saying what the transport layer does to the data.

Do not accept naming TCP or a port number on its own without expansion.

Do not accept routing/addressing packets using IP addresses, which is the internet layer.