Edexcel GCSE Computer Science (1CP2) Exam Questions

Award up to two marks for a linked description such as:

• Data travels along the cable directly to the switch on a single continuous path (1) so the time between sending and receiving the data is short (1)
• A cable is not affected by interference from other devices/wireless traffic nearby (1) so packets are not lost and resent, which would add to the delay (1)
• The switch sends the data only to the port of the correct device, not to every device (1) so the data spends less time travelling and the delay is lower (1)
• Fewer devices share a cable than share a wireless channel (1) so packets do not queue/wait before they are sent (1)

The first mark is for the way the wired connection carries the data; the second mark is for how this reduces the delay between sending and receiving.

Do not accept responses about bandwidth or the amount of data a cable can carry, as latency is the delay between sending and receiving.

Do not accept responses that confuse latency with speed/bandwidth, e.g. 'a wired connection is faster so there is less latency', unless they describe how the delay is reduced.

Do not accept answers that only say a wired connection is faster, with no link to the delay.

Award up to two marks for a linked description such as:

• Interference from other devices corrupts the wireless signal (1) so the data has to be resent, which increases the delay (1)
• Devices on a wireless network take turns to use the same channel/frequency (1) so a device may have to wait for the channel to be free before it can transmit, which adds to the delay (1)
• Data on a wireless connection must pass through the access point to reach the wired network (1) so the extra processing/conversion at the access point adds a delay (1)

Do not accept responses that only state that a wireless connection is slower/less reliable than a wired connection, without explaining how this adds latency.

Do not accept 'data is sent through the air' on its own, as this does not explain why latency is higher.

Do not accept responses about bandwidth or speed on their own.

Award up to two marks for a linked explanation such as:

• Devices near the edge/limit of the range receive a weaker signal/lower signal strength (1) so data is transferred more slowly/the connection speed/bandwidth is lower (1)
• Devices near the edge/limit of the range receive a weaker signal/lower signal strength (1) so latency increases (1)
• Devices outside the range cannot connect to the access point (1) so users in that area cannot use the network/access its resources (1)
• A device that moves out of range loses its connection (1) so the user's work is interrupted until it is back in range (1)

For both marks, the expansion must follow/associate with the statement.

For the second mark, the reason must state the effect on the user/network (e.g. cannot use the network/access resources, slower speed, higher latency), not just repeat that the device is out of range.

Do not accept a definition of range on its own (e.g. 'range is how far the signal reaches') without an effect on performance.

Do not accept 'a larger range means more devices can connect' (range is not about the number of devices/capacity).

Do not accept range confused with bandwidth/speed, e.g. 'range is the maximum amount of data that can be transferred'.