Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

3 questions · 6 marks

Pick again
Print
1Describe2 marksWired Connections Swap Remove

A hospital connects the computers on a ward using wired connections.

Describe how using wired connections can reduce latency on this network.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Data travels along the cable directly to the switch on a single continuous path (1) so the time between sending and receiving the data is short (1)
  • A cable is not affected by interference from other devices/wireless traffic nearby (1) so packets are not lost and resent, which would add to the delay (1)
  • The switch sends the data only to the port of the correct device, not to every device (1) so the data spends less time travelling and the delay is lower (1)
  • Fewer devices share a cable than share a wireless channel (1) so packets do not queue/wait before they are sent (1)

The first mark is for the way the wired connection carries the data; the second mark is for how this reduces the delay between sending and receiving.

Do not accept responses about bandwidth or the amount of data a cable can carry, as latency is the delay between sending and receiving.

Do not accept responses that confuse latency with speed/bandwidth, e.g. 'a wired connection is faster so there is less latency', unless they describe how the delay is reduced.

Do not accept answers that only say a wired connection is faster, with no link to the delay.

Example answers and how they were marked
Full marks2/2

The cable is not affected by interference from other devices so packets do not need to be resent and the delay stays low.

Why: First mark for the cable being free of interference (1); linked development that no packets are resent and so the delay is lower (1).

Some marks1/2

There is no interference from other devices on a cable.

Why: Gives the first point of a linked pair (1) but does not say how this reduces the delay between sending and receiving.

No marks0/2

Wired connections have a higher bandwidth so there is less latency.

Why: Confuses bandwidth with latency, which the 'Do not accept' lines rule out (0).

2Explain2 marksProtocols & Layers Swap Remove

Two computers exchange data over a network.

Explain why network protocols are needed for the two computers to communicate.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Devices (can) understand/interpret the data they receive (1) because they follow the same set of rules for communication (1)
  • Data is sent in an agreed format/structure (1) so the receiving device can interpret/understand it correctly (1)
  • Devices (can) connect/communicate successfully (1) because they agree how the data is transmitted, such as the type of signal used (1)
  • Errors (can) be detected/handled (1) because both devices follow the same rules for checking the data (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'so devices can talk/communicate with each other' or 'so they can understand each other' without saying they follow the same rules/agreed format.

Do not accept an answer that only states protocols are a set of rules, without saying what this allows (e.g. the data can be understood/interpreted).

Do not accept a faster connection/speed as a reason why protocols are needed.

Do not accept naming a protocol (e.g. TCP/IP, HTTP, Wi-Fi) without an explanation of why it is needed.

Do not accept a description of what a protocol does (e.g. 'TCP splits data into packets') without saying why this is needed.

Example answers and how they were marked
Full marks2/2

Devices can understand the data they receive because they follow the same set of rules for communication.

Why: Linked point (1) and reason (1): following the same rules is what lets the devices understand the data.

Some marks1/2

Data is sent in an agreed format.

Why: Point (1) identified, but no linked reason saying what the agreed format achieves.

No marks0/2

Protocols are needed so the connection is faster because more data can be sent at once.

Why: Speed is not a reason protocols are needed, so there is no creditworthy point or linked reason.

3Explain2 marksAddressing Swap Remove

Routers forward data across the internet.

Explain how a router uses the destination IP address of a packet to send the packet towards its destination.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The router reads/checks the destination (IP) address in the packet (1) so it can forward/send the packet towards that address/destination (1)
  • The router looks up/compares the destination (IP) address (1) to choose the route/next network/next router for the packet (1)
  • The router uses the destination (IP) address to choose/select the outgoing connection/network (1) so the packet is sent one step closer to its destination (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept a restatement of the question, such as 'the router uses the IP address to forward the packet', without saying how the address is used, e.g. checking the destination address or choosing the route/next network.

Do not accept answers that say the router gives/adds an IP address to the packet, or that the router uses a MAC address instead of the destination IP address.

Example answers and how they were marked
Full marks2/2

The router checks the destination IP address in the packet and sends the packet out on the route/network that leads towards that address.

Why: Point (1): the router checks the destination IP address; linked reason (1): this is used to send the packet towards that destination.

Some marks1/2

The router checks the destination IP address in the packet.

Why: Point (1): the router checks the destination IP address; no linked reason is given, so only the first mark.

No marks0/2

It adds an IP address to the packet so the packet knows where to go.

Why: Misconception: the router does not add an IP address to the packet; the mark scheme says not to accept this, so no marks.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.