Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 11 marks

Pick again
Print
1Short recall1 markSecondary Memory Swap Remove

Data is stored on optical discs as pits and lands.

Name the component in an optical disc drive that reads this data.

[1 mark]
Mark scheme

Award one mark for:

  • Laser (1)

Allow laser beam

Do not accept read/write head

Do not accept pits

Do not accept lands

Do not accept reflective surface

Do not accept magnet/magnetic

Example answers and how they were marked
Full marks1/1

Laser

Why: Laser is the creditworthy answer (1).

No marks0/1

A read/write head

Why: Read/write head is not accepted by the mark scheme; it reads magnetic media, not optical discs, so no marks are awarded.

No marks0/1

Pits and lands

Why: Pits and lands are what the laser reads, not the component that reads the data, so the mark scheme does not accept them.

2Describe2 marksEmbedded Systems Swap Remove

A drone is controlled by an embedded system.

Describe the purpose of the embedded system in the drone.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • It controls the motors/rotors (1) so that the drone can take off, hover, turn and land (1)
  • It keeps the drone stable/level automatically (1) by taking readings from a sensor (accelerometer/gyroscope/GPS) (1)
  • It receives signals from the remote control (1) and changes the speed of the motors to steer the drone (1)
  • It monitors the battery level (1) and brings the drone back to the ground before the battery runs out (1)

The development must relate to the function given in the point.

Accept a named function that the embedded system controls, e.g. 'it keeps the drone level', as the first mark (1).

Award the second mark only when the development gives a specific outcome or detail of that function, e.g. 'so that the drone can take off, hover, turn and land' or 'by changing the motor speeds to keep it level'.

Do not award the second mark for a generic outcome such as 'so it works', 'so it can fly' or 'so the drone moves'.

A bare 'it controls the motors so it can fly' therefore earns the first mark only.

Allow any other specific function of a drone that is carried out by the embedded system.

Do not accept 'it flies the drone' / 'it is the drone's brain' / 'it makes the drone work' without a named function being controlled.

Do not accept answers that describe the user or the remote control flying the drone with no function carried out by the embedded system.

Example answers and how they were marked
Full marks2/2

It keeps the drone level while it is in the air by reading the accelerometer and changing the speed of the motors.

Why: Named function of the embedded system, keeping the drone level (1), developed with the sensor reading and motor speed changes that achieve it (1).

Some marks1/2

It controls the motors of the drone.

Why: First mark only (1) for naming a function the embedded system controls, with no linked outcome or detail to earn the second mark.

No marks0/2

It is the brain of the drone and makes the drone work.

Why: Vague phrase with no named function being controlled, which the mark scheme's 'Do not accept' line rules out.

3Describe2 marksStored Program Computers Swap Remove

The CPU contains an arithmetic logic unit (ALU).

Describe the purpose of the arithmetic logic unit (ALU).

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Carries out arithmetic operations/calculations, such as addition or subtraction (1) so that the result can be stored in a register (1)
  • Carries out logical operations, such as comparing two data items (1) to see which one is greater/larger (1)
  • Compares two data items (1) to decide whether a condition is true / which path a program takes next (1)

Allow the result of an arithmetic or logical operation being held/stored in a register, but only where the operation is named.

Do not accept answers that say the ALU stores data or results without naming an operation (registers/main memory store data).

Do not accept answers about controlling components, decoding instructions or timing (that is the control unit or the clock).

Do not award credit for 'it processes data' on its own; an arithmetic or a logical operation must be named.

An example on its own, e.g. 'it adds two numbers', does not earn a second mark; the second mark needs a linked development.

Example answers and how they were marked
Full marks2/2

The ALU carries out arithmetic operations such as addition and subtraction, and the result of the calculation is stored in a register.

Why: Linked point (1) for arithmetic operations with an example, and development (1) for the result being stored in a register.

Some marks1/2

It does all the calculations in the CPU, for example adding two numbers together.

Why: Point (1) for arithmetic operations/calculations named with an example; no linked development, so the second mark is not earned.

No marks0/2

It stores the results of calculations so that they can be used by the CPU later.

Why: Storing results with no arithmetic or logical operation named, which the 'Do not accept' line rules out, so no mark is earned.

4Discuss6 marksFetch Decode Execute Cycle Swap Remove

A small robotics company is designing a new robot. The robot's computer uses von Neumann architecture. The engineers are explaining how programs are stored and run.

Discuss how the von Neumann stored program concept and main memory (RAM) are used during the fetch-decode-execute cycle.

Your answer should include:

  • what is meant by the stored program concept
  • the role of RAM in the cycle
  • why the stored program concept is useful.
[6 marks]
Mark scheme

Indicative content

Stored program concept

  • Instructions and data are stored together in the same main memory (RAM).
  • Instructions are fetched one at a time from memory and executed in sequence.
  • The program can be changed by loading different instructions into RAM.
  • The CPU can only execute instructions that are in main memory.

Role of RAM

  • RAM holds the program instructions and the data being used.
  • The address of the next instruction is held in the program counter (PC).
  • The instruction is fetched from RAM using the address bus.
  • The data bus carries the instruction from RAM to the CPU.
  • RAM is volatile, so programs are lost when power is off.
  • RAM is directly accessible by the CPU, unlike secondary storage.

Benefits

  • The same hardware can run many different programs.
  • Programs can be loaded and changed quickly.
  • No need to rewire the computer for a new task.
  • Makes general-purpose computers possible.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)
Example answers and how they were marked
Full marks6/6

The von Neumann stored program concept means that both the program instructions and the data are stored together in the same main memory, RAM. During the fetch-decode-execute cycle, the CPU fetches an instruction from RAM, decodes it in the control unit, and then executes it. The program counter holds the address of the next instruction, and this address is sent along the address bus to RAM. RAM then returns the instruction along the data bus to the CPU. RAM is volatile, so it only holds the program while the robot is powered on. The stored program concept is useful because the robot's computer can run different programs without changing any hardware; new instructions can simply be loaded into RAM. This makes the computer general-purpose and flexible.

Why: Comprehensive understanding: defines stored program concept, explains RAM role with PC, address bus and data bus, applies to robot, and gives benefits. Sustained lines of reasoning. Level 3.

Some marks3/6

The stored program concept is when instructions and data are stored in RAM. The CPU fetches instructions from RAM. The program counter keeps the address of the next instruction. RAM holds the program. The benefit is that you can change the program without rewiring the computer.

Why: Adequate understanding: correct basic points about stored program concept and RAM, with some linkage, but little development or application to the robot's fetch-decode-execute cycle. Level 2.

Some marks1/6

The von Neumann stored program concept is that the CPU uses RAM to store the program. The fetch-decode-execute cycle fetches, decodes and executes. RAM is random access memory. The benefit is that it is fast.

Why: Basic independent points only; no real linkage or application to the robot. Level 1.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.