Edexcel GCSE Computer Science (1CP2) exam questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Practice paper

8 questions · 23 marks

Pick again

1Short recall1 markSecondary Memory Swap Remove

Data is stored on optical discs as pits and lands.

Name the component in an optical disc drive that reads this data.

[1 mark]

Mark scheme

Award one mark for:

Laser (1)

Allow laser beam

Do not accept read/write head

Do not accept pits

Do not accept lands

Do not accept reflective surface

Do not accept magnet/magnetic

Example answers and how they were marked

Full marks1/1

Laser

Why: Laser is the creditworthy answer (1).

No marks0/1

A read/write head

Why: Read/write head is not accepted by the mark scheme; it reads magnetic media, not optical discs, so no marks are awarded.

No marks0/1

Pits and lands

Why: Pits and lands are what the laser reads, not the component that reads the data, so the mark scheme does not accept them.

2Short recall2 marksUnits & Conversion Swap Remove

Data storage is measured in binary multiples.

Define the term bit.

[2 marks]

Mark scheme

Award one mark for any of the following up to a maximum of two marks:

A binary digit (1)
Has the value 0 or 1 (1)
The smallest unit of data storage (1)
A single 0 or 1 (1)

Allow binary digit/binary place value for binary digit

Allow a single binary digit for a single 0 or 1

Do not accept a group of 8 bits/half a nibble of 4 bits, which describe a byte or a nibble

Do not accept a binary number/binary on its own

Example answers and how they were marked

Full marks2/2

A binary digit that can have the value 0 or 1.

Why: A binary digit (1) and has the value 0 or 1 (1).

Some marks1/2

It is the smallest unit of data storage.

Why: Smallest unit of data storage (1), but does not state that it is a binary digit or that it has the value 0 or 1.

No marks0/2

A group of 8 bits.

Why: Describes a byte, not a bit; no creditworthy point and named in the Do not accept line.

3Describe2 marksUtility Software Swap Remove

A student has a large number of photographs stored on a computer.

Describe the purpose of data compression software.

[2 marks]

Mark scheme

Award up to two marks for a linked description such as:

Makes a file/files smaller (1) so less storage space is needed on the disk (1)
Reduces the size of the data (1) so it takes less time to upload/download/transfer the file (1)
Compresses files/folders into a single file (1) so an attachment is under the size limit for email (1)
Reduces the size of the files (1) so more of them fit onto a storage device/backup media (1)

Do not accept 'it compresses the files' on its own, as this repeats the question.

Do not accept responses about protecting files from malware/viruses or about deleting files.

Example answers and how they were marked

Full marks2/2

It makes the files smaller (1) so that they use less storage space on the computer and more of them fit on the disk (1).

Why: The point (1) and a linked development giving the benefit (1).

Some marks1/2

It makes files smaller.

Why: This is the point (1) but there is no development of what the smaller size leads to, so only one mark.

No marks0/2

It protects the files from viruses so that they cannot be damaged.

Why: This describes anti-malware software, which the mark scheme does not accept; no creditworthy point is made.

4Describe2 marksTranslators Swap Remove

High-level code can be translated by a compiler or by an interpreter.

Describe how a compiler translates high-level code differently from an interpreter.

[2 marks]

Mark scheme

Award up to two marks for a linked description such as:

The compiler translates the whole program/complete source code in one go (1) whereas the interpreter translates one line/statement at a time (1)
The compiler translates all of the source code before any of it is run/executed (1) but the interpreter translates each line/statement as it reads it (1)
The interpreter translates one line/statement at a time (1) and the compiler translates the whole program/source code together (1)

Accept the compiler point and the interpreter point in either order.

Do not accept responses about object code/executable files, when the translated code is executed, how errors are reported, or speed/memory use.

Do not accept 'the interpreter executes/runs each line' on its own, without saying that it translates one line/statement at a time.

Example answers and how they were marked

Full marks2/2

A compiler translates the whole program in one go, while an interpreter translates one line at a time.

Why: Whole program translated in one go (1) and interpreter translates one line at a time (1).

Some marks1/2

A compiler translates the whole program in one go.

Why: Whole program translated in one go (1); no linked point about the interpreter translating a line at a time.

No marks0/2

A compiler produces an executable file, but an interpreter does not.

Why: Describes the output, not the amount translated at a time; object code/executable files are not accepted.

5Explain2 marksPacket Switching Swap Remove

A file is sent across the internet in packets.

Explain why packets from the same file may take different routes.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

Each router chooses the best route at the time (1) so when a route becomes busy/congested or fails, later packets are forwarded along a different path (1)
Routers forward each packet separately (1) so the path a packet takes depends on the traffic conditions when that packet arrives (1)
A router may send a packet to a different next router (1) if its routing table shows a better/less congested route for that packet (1)
Traffic on the internet changes (1) so no single path is kept for the file and each packet can use whichever route is best when it is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow reference to a routing table, or to how a router decides the route, as part of the linked reason.

Do not accept 'the packets have different IP addresses' because all packets from the same file have the same destination IP address, even though their routes can differ.

Do not accept 'the internet is busy' or 'there is a lot of traffic' on its own without linking this to the router choosing a different route.

Do not accept 'different routers send the packets' on its own without a reason why a different router/route is chosen.

Do not accept an answer that only says the packets take different routes without explaining why.

Example answers and how they were marked

Full marks2/2

Each router chooses the best route at the time, so if one route becomes busy or fails, later packets are sent a different way.

Why: Linked point (1) that each router chooses the best route at the time and reason (1) that a busy or failed route means later packets take a different path.

Some marks1/2

Routers send packets along the least congested route.

Why: States that a router chooses the least congested route (1) but gives no linked reason why this makes the packets from the file take different routes.

No marks0/2

Because each packet is given a different IP address so they go to different places.

Why: Misconception named in the mark scheme: all packets from the same file share the same destination IP address, even though their routes can differ.

6Calculate2 marksBinary Shifts Swap Remove

Computers manipulate binary patterns.

Complete the table with the result of applying the shift to the binary pattern.

[2 marks]

Binary pattern	Shift	8-bit binary result
1000 0001	Logical shift right by 1

Mark scheme

Award one mark for each correct nibble in the correct order:

0100 (1)
0000 (1)

0 marks if the response is not 8-bit binary.

Example answers and how they were marked

Full marks2/2

0100 0000

Why: Every bit moves 1 place right, with 0s in from the left: both nibbles are correct (2).

Some marks1/2

0100 0001

Why: A slip in the last bit. The first nibble is correct (1); the second is not.

No marks0/2

0000 0010

Why: Shifts the bits the wrong way. Neither nibble is correct.

7Discuss6 marksPurpose & Function of Operating Systems Swap Remove

A home computer is used to stream music, edit a video and download files at the same time.

Discuss how the operating system manages the processes running on the computer.

Your answer should include:

how the CPU is shared between processes
the states a process can be in
how the operating system responds when a process needs attention

[6 marks]

Mark scheme

Indicative content

How the CPU is shared between processes

The operating system uses multitasking to give each process a short time slice on the CPU, so the music, video editor and download appear to run at the same time.
The operating system decides which ready process will run next, so one program cannot keep the CPU to itself.
The operating system can stop a running process and move it back to ready when its time slice ends, so all processes make progress.

The states a process can be in

When a program is opened, the operating system creates a process and moves its instructions into RAM so it is ready.
The operating system moves a ready process to running when the CPU is free.
A running process becomes blocked when it is waiting for input or data, such as the download waiting for data to arrive.
When the process finishes, the operating system terminates it and releases the resources it was using.

How the operating system responds when a process needs attention

An interrupt is a signal to the CPU that needs immediate attention, so the operating system suspends the current process and runs the interrupt handler.
A hardware interrupt could be a printer out of paper, and a software interrupt could be an error in a program.
After the interrupt has been handled, the operating system can return the interrupted process to the CPU.

Levels

Level 0 (0 marks): No rewardable content.
Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

Level 3 responses must cover at least two of scheduling, process states and interrupts.
A response that only states that the OS 'manages processes' or gives a program a turn, without expansion, is limited to Level 1.

Example answers and how they were marked

Full marks6/6

The OS uses multitasking to share the CPU. It gives each process, such as the music player and the video editor, a small time slice so they appear to run at the same time. It decides which ready process is next and how long it runs. When the video editor is opened, the OS creates a process and moves its instructions into RAM so it is ready; when the CPU is free it moves it to running. If the download is waiting for data, the OS marks it blocked so the CPU is not wasted. If the printer runs out of paper, a hardware interrupt tells the CPU to stop and run the interrupt handler; afterwards the OS returns to the process.

Why: Covers scheduling with time slices, process states (ready, running, blocked) and interrupts, with sustained application to the music, video editor and download. Level 3.

Some marks4/6

The operating system uses multitasking so the music and video editor can run at the same time. It gives each program a small amount of time on the CPU. When a program is opened it creates a process and puts it in RAM. If a process is waiting for input it is blocked.

Why: Covers CPU sharing and process states, with some application, but says nothing about interrupts. Level 2.

Some marks1/6

The operating system manages processes by giving each program a turn on the CPU. This stops the computer crashing when too many programs are open.

Why: Gives only a basic, undeveloped point about giving each program a turn, with no linkage or application. Level 1.

8Discuss6 marksTranslators Swap Remove

A student is writing a program in a high-level language. The student runs the program after every small change to check that it works.

Discuss whether the student should use an interpreter or a compiler while writing and testing the program.

Your answer should include:

how each translator deals with a syntax error
how much of the program is translated at a time
how this affects the student's testing.

[6 marks]

Mark scheme

Indicative content

How each translator deals with a syntax error

An interpreter stops as soon as it finds a syntax error and displays an error message.
With an interpreter, the lines before the error have already been executed, so the student can see how far the program got before it stopped.
A compiler reports errors at the end of translation, so the student gets a list of all the syntax errors in the program in one go.

How much of the program is translated at a time

An interpreter translates one line at a time and executes each line immediately.
A compiler translates the whole program in one go before any of it is run.
A compiler produces object code, so after every change the whole program must be compiled again before the student can run it.
An interpreter produces no object code, so the student does not have to wait for the whole program to be translated before it runs.

How this affects the student's testing

An interpreter suits this student because the program can be run straight away after each small change.
The interpreter stops at the first error found, so the student fixes that error and runs the program again, but may only find the next error on the next run.
Reporting every error at the end of compilation means the student can fix several errors at once, but cannot run the program until the whole program compiles.
The student should use an interpreter while testing, and compile the finished program once it works.

Levels

Level 0 (0 marks): No rewardable content.
Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must relate the way each translator works to the student's testing, not just describe the two translators.

Do not accept answers about run-time or logic errors where no comparison of the translators is made.

Example answers and how they were marked

Full marks6/6

The student should use an interpreter while testing. An interpreter translates one line at a time and executes each line straight away, so as soon as the student has made a small change the program can be run without waiting for the whole program to be translated. If there is a syntax error, the interpreter stops at that line and displays an error message, and the lines before it have already been executed, so the student knows exactly where the problem is. A compiler translates the whole program in one go and only reports the errors at the end, so the student would get a list of all the syntax errors, but could not run any of the program until the whole program compiled successfully.

Why: Explains how each translator deals with a syntax error, how much is translated at a time (one line executed immediately against the whole program at once) and links both to the student's testing, with a conclusion. Level 3.

Some marks4/6

An interpreter translates one line at a time and stops when it finds an error, so the student can see where the error is. A compiler translates the whole program and reports all the errors at the end. The interpreter is better for testing because the student can run the program straight away after a change.

Why: Adequate: correct points about error reporting and one line at a time, with a recommendation, but the effect on testing is only asserted rather than reasoned through, so the linkage is not sustained. Level 2.

Some marks1/6

The student should use a compiler because it translates the program one line at a time and stops at the first error, which makes testing quicker.

Why: The roles of the two translators are reversed, so the answer only makes a basic point about testing more quickly. Level 1.

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a paper

Practice paper

Questions by topic

2.1 Binary

2.2 Data representation

2.3 Data storage and compression

3.1 Hardware

3.2 Software

3.3 Programming languages

4.1 Networks

More ways to revise Edexcel GCSE Computer Science (1CP2)