Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Short recall1 markWired Connections Swap Remove

Wired connections have characteristics that affect network performance.

State what is meant by the range of a wired network connection.

[1 mark]
Mark scheme

Award one mark for:

  • The maximum distance data/a signal can be transmitted before it becomes too weak to be received (1)

Allow 'how far a signal can travel'.

Do not accept the number of devices that can be connected to the network.

Do not accept the speed at which data is transmitted.

Do not accept bandwidth/the maximum capacity of a channel.

Do not accept latency/the delay between a signal being sent and received.

Example answers and how they were marked
Full marks1/1

The maximum distance a signal can be transmitted before it becomes too weak to be received.

Why: Gives the maximum distance a signal can be transmitted before it becomes too weak, which is the creditworthy point (1).

No marks0/1

The maximum capacity of the connection.

Why: This describes bandwidth, which the mark scheme says not to accept for range, so no mark.

No marks0/1

The delay between a signal being sent and received.

Why: This describes latency/delay, which the mark scheme says not to accept for range, so no mark.

2Describe2 marksWireless Connections Swap Remove

A family uses a wireless network at home.

Describe how interference can affect the performance of a wireless network.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Other electrical/radio devices nearby (1) interfere with the wireless signal so data is corrupted (1)
  • Interference corrupts data (1) so the data has to be resent, which increases latency/slows the transfer (1)
  • Interference reduces the strength of the signal received (1) which lowers the data transfer rate the connection can support (1)
  • Interference makes the connection drop (1) so data transfer stops/devices have to reconnect (1)

Do not accept responses that only name a device (microwave, phone) without saying how it affects the network.

Do not accept responses that only state the network becomes slower without saying what causes the interference or how it affects the data.

Do not accept responses about wired connections or cables.

Example answers and how they were marked
Full marks2/2

Other electrical devices nearby can interfere with the wireless signal and corrupt data, so the data has to be resent and transfers are slower.

Why: Linked point: other electrical devices interfere and corrupt data (1), developed by the data being resent, which slows the transfer (1).

Some marks1/2

Other electrical devices nearby can interfere with the wireless signal.

Why: Cause given: other electrical devices interfere with the signal (1), but no development of how this affects the data or performance.

No marks0/2

Interference happens when the wireless cable is damaged by other cables.

Why: Misconception about cables; the mark scheme does not accept responses about wired connections or cables.

3Explain2 marksProtocols & Layers Swap Remove

Two computers exchange data over a network.

Explain why network protocols are needed for the two computers to communicate.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Devices (can) understand/interpret the data they receive (1) because they follow the same set of rules for communication (1)
  • Data is sent in an agreed format/structure (1) so the receiving device can interpret/understand it correctly (1)
  • Devices (can) connect/communicate successfully (1) because they agree how the data is transmitted, such as the type of signal used (1)
  • Errors (can) be detected/handled (1) because both devices follow the same rules for checking the data (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'so devices can talk/communicate with each other' or 'so they can understand each other' without saying they follow the same rules/agreed format.

Do not accept an answer that only states protocols are a set of rules, without saying what this allows (e.g. the data can be understood/interpreted).

Do not accept a faster connection/speed as a reason why protocols are needed.

Do not accept naming a protocol (e.g. TCP/IP, HTTP, Wi-Fi) without an explanation of why it is needed.

Do not accept a description of what a protocol does (e.g. 'TCP splits data into packets') without saying why this is needed.

Example answers and how they were marked
Full marks2/2

Devices can understand the data they receive because they follow the same set of rules for communication.

Why: Linked point (1) and reason (1): following the same rules is what lets the devices understand the data.

Some marks1/2

Data is sent in an agreed format.

Why: Point (1) identified, but no linked reason saying what the agreed format achieves.

No marks0/2

Protocols are needed so the connection is faster because more data can be sent at once.

Why: Speed is not a reason protocols are needed, so there is no creditworthy point or linked reason.

4Explain2 marksWireless Connections Swap Remove

A student plays an online game using a laptop connected to the school Wi-Fi.

Explain one reason why an online game can respond more slowly over a wireless connection than over a wired connection.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Wireless signals can be blocked or absorbed by walls (1) so the data must be re-sent, which adds delay (1)
  • A device further from the access point has a weaker signal (1) so data must be re-sent/transmitted at a lower rate, adding delay (1)
  • Devices on a wireless network share a channel (1) so a device must wait its turn to transmit, which adds delay (1)
  • Interference from other devices affects the radio signal (1) so data must be re-sent, adding delay (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'waiting to send' or 'collisions' as the delay caused by devices sharing a channel.

Do not accept 'wireless is slower than wired' on its own, as this repeats the question.

Do not accept a reason that only affects download speed/bandwidth (e.g. 'files take longer to download') without a link to delay.

Example answers and how they were marked
Full marks2/2

Interference from other devices affects the radio signal, so the data has to be re-sent and this adds delay before the player's action appears.

Why: Linked point (1): interference affects the signal; reason (1): re-sending the data adds delay (latency).

Some marks1/2

Walls can block the wireless signal.

Why: Point only (1): walls block the signal. No linked reason saying that this means data must be re-sent, which adds delay.

No marks0/2

Wireless has less bandwidth than wired, so a game update takes longer to download.

Why: Confuses latency with bandwidth/download speed; the mark scheme says not to accept this without a link to delay.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 65
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 12 questions

5.3 Cybersecurity

Malware 8 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.