Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Short recall1 markWired Connections Swap Remove

Wired connections have characteristics that affect network performance.

State what is meant by the range of a wired network connection.

[1 mark]
Mark scheme

Award one mark for:

  • The maximum distance data/a signal can be transmitted before it becomes too weak to be received (1)

Allow 'how far a signal can travel'.

Do not accept the number of devices that can be connected to the network.

Do not accept the speed at which data is transmitted.

Do not accept bandwidth/the maximum capacity of a channel.

Do not accept latency/the delay between a signal being sent and received.

Example answers and how they were marked
Full marks1/1

The maximum distance a signal can be transmitted before it becomes too weak to be received.

Why: Gives the maximum distance a signal can be transmitted before it becomes too weak, which is the creditworthy point (1).

No marks0/1

The maximum capacity of the connection.

Why: This describes bandwidth, which the mark scheme says not to accept for range, so no mark.

No marks0/1

The delay between a signal being sent and received.

Why: This describes latency/delay, which the mark scheme says not to accept for range, so no mark.

2Short recall2 marksWired Connections Swap Remove

A company can choose between two wired connections. Connection B has a higher bandwidth than connection A.

Give two benefits to the company of choosing connection B.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Files/data download/upload more quickly (1)
  • More employees can use the connection at the same time without it slowing down (1)
  • Web pages/streamed video load more quickly with less buffering (1)
  • Video calls/conferencing run at a higher quality (1)
  • Updates/backups can be completed in less time (1)

Allow 'multiple users' or 'more devices' for the shared-use point

Allow 'video streams more quickly' or 'less buffering' on their own

Do not accept lower latency, as a higher bandwidth does not reduce latency

Do not accept 'more data can be transferred per second' or 'a bigger bandwidth', as these repeat what bandwidth is

Do not accept 'more reliable' on its own, as a higher bandwidth does not make a wired connection more reliable

Example answers and how they were marked
Full marks2/2

Files will download more quickly, and more employees can use the internet at the same time without the connection slowing down.

Why: Files download more quickly (1) and more users without slowdown (1).

Some marks1/2

Web pages will load faster and the connection will have a longer range.

Why: Web pages load faster (1); the range of a connection is not increased by bandwidth, so that point is not credited.

No marks0/2

The connection will be more reliable because it has a bigger bandwidth.

Why: 'More reliable' is not credited on its own and 'bigger bandwidth' repeats the question, so no marks.

3Describe2 marksWireless Connections Swap Remove

A family uses a wireless network at home.

Describe how interference can affect the performance of a wireless network.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Other electrical/radio devices nearby (1) interfere with the wireless signal so data is corrupted (1)
  • Interference corrupts data (1) so the data has to be resent, which increases latency/slows the transfer (1)
  • Interference reduces the strength of the signal received (1) which lowers the data transfer rate the connection can support (1)
  • Interference makes the connection drop (1) so data transfer stops/devices have to reconnect (1)

Do not accept responses that only name a device (microwave, phone) without saying how it affects the network.

Do not accept responses that only state the network becomes slower without saying what causes the interference or how it affects the data.

Do not accept responses about wired connections or cables.

Example answers and how they were marked
Full marks2/2

Other electrical devices nearby can interfere with the wireless signal and corrupt data, so the data has to be resent and transfers are slower.

Why: Linked point: other electrical devices interfere and corrupt data (1), developed by the data being resent, which slows the transfer (1).

Some marks1/2

Other electrical devices nearby can interfere with the wireless signal.

Why: Cause given: other electrical devices interfere with the signal (1), but no development of how this affects the data or performance.

No marks0/2

Interference happens when the wireless cable is damaged by other cables.

Why: Misconception about cables; the mark scheme does not accept responses about wired connections or cables.

4Explain2 marksPacket Switching Swap Remove

A file is sent across the internet in packets.

Explain why packets from the same file may take different routes.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Each router chooses the best route at the time (1) so when a route becomes busy/congested or fails, later packets are forwarded along a different path (1)
  • Routers forward each packet separately (1) so the path a packet takes depends on the traffic conditions when that packet arrives (1)
  • A router may send a packet to a different next router (1) if its routing table shows a better/less congested route for that packet (1)
  • Traffic on the internet changes (1) so no single path is kept for the file and each packet can use whichever route is best when it is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow reference to a routing table, or to how a router decides the route, as part of the linked reason.

Do not accept 'the packets have different IP addresses' because all packets from the same file have the same destination IP address, even though their routes can differ.

Do not accept 'the internet is busy' or 'there is a lot of traffic' on its own without linking this to the router choosing a different route.

Do not accept 'different routers send the packets' on its own without a reason why a different router/route is chosen.

Do not accept an answer that only says the packets take different routes without explaining why.

Example answers and how they were marked
Full marks2/2

Each router chooses the best route at the time, so if one route becomes busy or fails, later packets are sent a different way.

Why: Linked point (1) that each router chooses the best route at the time and reason (1) that a busy or failed route means later packets take a different path.

Some marks1/2

Routers send packets along the least congested route.

Why: States that a router chooses the least congested route (1) but gives no linked reason why this makes the packets from the file take different routes.

No marks0/2

Because each packet is given a different IP address so they go to different places.

Why: Misconception named in the mark scheme: all packets from the same file share the same destination IP address, even though their routes can differ.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.