Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 8 marks

Pick again
Print
1Short recall2 marksWired Connections Swap Remove

A school connects its desktop computers to the network using cables.

Give two reasons why the wired connections give better network performance than the wireless connections.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Faster transmission speed (1)
  • Higher bandwidth (1)
  • Lower latency (1)
  • Not affected by interference (from other devices/walls) (1)
  • No blind spots/not affected by distance from the wireless access point (1)

Do not accept benefits of wireless connections, e.g. users can move around the building with their devices

Do not accept 'easier to set up' or 'does not need a password' as these are not about network performance

Example answers and how they were marked
Full marks2/2

The wired connection is not affected by interference from other devices, and it has a lower latency than Wi-Fi.

Why: Interference point (1) and lower latency point (1).

Some marks1/2

It has a faster transmission speed and the users can move around the building with their computers.

Why: Faster transmission speed (1); moving around is a benefit of wireless, so is not credited.

No marks0/2

It is easier to set up the network and the users do not need a password.

Why: Neither point is about network performance; the mark scheme does not accept 'easier to set up' or password points, so no marks.

2Describe2 marksWireless Connections Swap Remove

A network can use wired connections or wireless connections.

Describe why a wireless connection can have a higher latency than a wired connection.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Interference from other devices corrupts the wireless signal (1) so the data has to be resent, which increases the delay (1)
  • Devices on a wireless network take turns to use the same channel/frequency (1) so a device may have to wait for the channel to be free before it can transmit, which adds to the delay (1)
  • Data on a wireless connection must pass through the access point to reach the wired network (1) so the extra processing/conversion at the access point adds a delay (1)

Do not accept responses that only state that a wireless connection is slower/less reliable than a wired connection, without explaining how this adds latency.

Do not accept 'data is sent through the air' on its own, as this does not explain why latency is higher.

Do not accept responses about bandwidth or speed on their own.

Example answers and how they were marked
Full marks2/2

Interference from other devices can corrupt the wireless signal, so the data has to be resent, which increases the delay.

Why: Linked point: interference corrupts the signal (1), developed by the delay caused by resending the data (1).

Some marks1/2

Wireless signals can be corrupted by interference from other devices.

Why: The point that interference corrupts the wireless signal (1) is given, but there is no development of how this leads to a delay.

No marks0/2

Wireless is slower than a wired connection, so it has a higher latency.

Why: Only states that wireless is slower, without explaining how this adds latency, so it is not accepted.

3Explain2 marksProtocols & Layers Swap Remove

Two computers exchange data over a network.

Explain why network protocols are needed for the two computers to communicate.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Devices (can) understand/interpret the data they receive (1) because they follow the same set of rules for communication (1)
  • Data is sent in an agreed format/structure (1) so the receiving device can interpret/understand it correctly (1)
  • Devices (can) connect/communicate successfully (1) because they agree how the data is transmitted, such as the type of signal used (1)
  • Errors (can) be detected/handled (1) because both devices follow the same rules for checking the data (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'so devices can talk/communicate with each other' or 'so they can understand each other' without saying they follow the same rules/agreed format.

Do not accept an answer that only states protocols are a set of rules, without saying what this allows (e.g. the data can be understood/interpreted).

Do not accept a faster connection/speed as a reason why protocols are needed.

Do not accept naming a protocol (e.g. TCP/IP, HTTP, Wi-Fi) without an explanation of why it is needed.

Do not accept a description of what a protocol does (e.g. 'TCP splits data into packets') without saying why this is needed.

Example answers and how they were marked
Full marks2/2

Devices can understand the data they receive because they follow the same set of rules for communication.

Why: Linked point (1) and reason (1): following the same rules is what lets the devices understand the data.

Some marks1/2

Data is sent in an agreed format.

Why: Point (1) identified, but no linked reason saying what the agreed format achieves.

No marks0/2

Protocols are needed so the connection is faster because more data can be sent at once.

Why: Speed is not a reason protocols are needed, so there is no creditworthy point or linked reason.

4Explain2 marksWireless Connections Swap Remove

A student plays an online game using a laptop connected to the school Wi-Fi.

Explain one reason why an online game can respond more slowly over a wireless connection than over a wired connection.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Wireless signals can be blocked or absorbed by walls (1) so the data must be re-sent, which adds delay (1)
  • A device further from the access point has a weaker signal (1) so data must be re-sent/transmitted at a lower rate, adding delay (1)
  • Devices on a wireless network share a channel (1) so a device must wait its turn to transmit, which adds delay (1)
  • Interference from other devices affects the radio signal (1) so data must be re-sent, adding delay (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'waiting to send' or 'collisions' as the delay caused by devices sharing a channel.

Do not accept 'wireless is slower than wired' on its own, as this repeats the question.

Do not accept a reason that only affects download speed/bandwidth (e.g. 'files take longer to download') without a link to delay.

Example answers and how they were marked
Full marks2/2

Interference from other devices affects the radio signal, so the data has to be re-sent and this adds delay before the player's action appears.

Why: Linked point (1): interference affects the signal; reason (1): re-sending the data adds delay (latency).

Some marks1/2

Walls can block the wireless signal.

Why: Point only (1): walls block the signal. No linked reason saying that this means data must be re-sent, which adds delay.

No marks0/2

Wireless has less bandwidth than wired, so a game update takes longer to download.

Why: Confuses latency with bandwidth/download speed; the mark scheme says not to accept this without a link to delay.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.