Edexcel GCSE Computer Science (1CP2) Exam Questions

Award one mark for any of the following up to a maximum of two marks:

• (Storage that is) non-volatile / keeps its data when the power is turned off (1)
• (Storage that is) used to store programs and data/files (for later use) (1)
• (Storage that is) not directly accessible by the CPU / not directly accessed by the CPU (1)

Allow both the non-volatile point and the stores programs and data point from one sentence if each idea is clearly stated, e.g. 'non-volatile storage that holds programs and data'.

Allow accessed via the CPU / must be copied into RAM before the CPU can use it for the third point.

Do not accept volatile / loses its data when the power is turned off.

Do not accept a description of primary storage, such as RAM or ROM.

Do not accept capacity.

Do not accept an example device on its own (e.g. hard disk drive).

Award one mark for any of the following up to a maximum of two marks:

• Program instructions are stored in main memory/RAM (1)
• The data used by the program is stored in main memory/RAM (1)
• The CPU fetches/reads instructions from main memory to execute them (1)
• The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Award up to two marks for a linked description such as:

• A read/write head moves over the surface of the disk (1) to read/write data by detecting or changing the magnetic alignment of areas of the surface (1)
• The head magnetises areas of the disk surface in different directions (1) so each area represents a binary 1 or 0 (1)
• Data is stored on concentric circles called tracks (1) which are divided into sectors (1)

Allow one mark for tracks/concentric circles on their own.

For the second mark in the first two bullets, the response must refer to the magnetic alignment/charge being detected or changed, not just that the head reads/writes data.

Do not award a mark for 'it is magnetic' or 'it stores data in binary' with no description of how the data is stored.

Do not accept descriptions of optical storage (e.g. a laser, pits and lands) or solid state storage (e.g. electric charges in chips).

Indicative content

The role of the CPU and registers

• The control unit decodes the instruction fetched from main memory and controls the other components during the cycle.
• The ALU carries out arithmetic and logical operations during the execute stage, such as adding two values held in registers.
• Registers hold the data, addresses and results that the CPU is working on during the cycle.
• The program counter holds the address of the next instruction to be fetched, so it is incremented after each fetch.
• The memory address register holds the address of the memory location that is about to be read or written.
• The memory data register holds the instruction or data that has been fetched from or is being written to main memory.

The role of the address bus, data bus and control bus

• The address bus carries the address of the memory location that the CPU needs to access from the CPU to main memory.
• The address bus is one-way, so addresses are only sent from the CPU to main memory.
• The data bus carries instructions and data between the CPU and main memory, so it is bi-directional.
• The width of the data bus affects how many bits can be transferred at one time.
• The control bus carries control signals such as read and write signals, so main memory knows whether the CPU wants to read an instruction or write data.
• The control bus carries signals from the control unit to coordinate the components during the fetch-decode-execute cycle.

The role of the clock

• The clock sends regular pulses that synchronise the actions of the CPU and main memory.
• Each clock pulse triggers the next step of the fetch-decode-execute cycle, so the stages happen in the correct order.
• The clock provides a regular timing signal so that the fetch-decode-execute cycle repeats at a steady rate.
• The clock is separate from the control bus; the control bus carries control signals, while the clock provides timing pulses.
• Do not credit the address bus storing addresses, the data bus storing data, or the control bus controlling the computer without naming a control signal; do not credit clock speed affecting performance as a role in the cycle.
• Level 3 responses must cover all three bullets and link them to the fetch-decode-execute cycle; Level 2 answers may identify roles but link them only partly to the cycle.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)