Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 14 marks

Pick again
Print
1Short recall2 marksSecondary Memory Swap Remove

Computers have both primary storage and secondary storage.

Define the term secondary storage.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • (Storage that is) non-volatile / keeps its data when the power is turned off (1)
  • (Storage that is) used to store programs and data/files (for later use) (1)
  • (Storage that is) not directly accessible by the CPU / not directly accessed by the CPU (1)

Allow both the non-volatile point and the stores programs and data point from one sentence if each idea is clearly stated, e.g. 'non-volatile storage that holds programs and data'.

Allow accessed via the CPU / must be copied into RAM before the CPU can use it for the third point.

Do not accept volatile / loses its data when the power is turned off.

Do not accept a description of primary storage, such as RAM or ROM.

Do not accept capacity.

Do not accept an example device on its own (e.g. hard disk drive).

Example answers and how they were marked
Full marks2/2

Secondary storage is non-volatile, so it does not lose data when the power is turned off. It is used to store programs and data files for later use.

Why: Non-volatile / keeps data when the power is off (1) and used to store programs and data files (1), each idea clearly stated.

Some marks1/2

Secondary storage is used to store programs and data files.

Why: Stores programs and data/files (1), but nothing is said about it being non-volatile or not directly accessible by the CPU.

No marks0/2

Secondary storage is volatile memory that holds the data the CPU is using at the moment.

Why: Describes primary storage (RAM) and says it is volatile, which the mark scheme says not to accept, so no marks are awarded.

2Describe2 marksSecondary Memory Swap Remove

A laptop uses a solid state drive (SSD) for secondary storage.

Describe how data is stored on a solid state drive.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Data is stored on (flash) memory chips/cells (1) as a pattern of electrical charges (1)
  • A current/voltage forces electrons through a barrier (1) so that they are trapped (or not trapped) to hold/represent a value (1)
  • Cells with a trapped charge and cells with no trapped charge (1) represent 1s and 0s/binary (1)
  • The trapped charge remains when the power is turned off (1) so the data is not lost/it is non-volatile (1)

Do not accept responses that describe magnetic storage, e.g. magnetised platters, spinning disks or read/write heads, or optical storage, e.g. lasers, pits and lands.

Do not award a mark for 'it is solid state' or 'it has no moving parts' without a description of how the data is stored.

Do not award a mark for restating the stem, e.g. 'a laptop uses an SSD' or 'an SSD uses flash memory'.

'Data is stored as electrical charges' on its own, with no reference to memory chips/cells or to how the charge is held, earns a maximum of one mark (1).

A response that only describes electrons being trapped, with no link to how the value/data is represented, earns one mark (1). The second mark needs a link such as trapped and not trapped charge representing 1s and 0s, or the trapped charge being kept so the data is not lost.

Example answers and how they were marked
Full marks2/2

A current is used to force electrons through a barrier so that they become trapped, and a cell with a trapped charge or a cell with no trapped charge represents a 1 or a 0.

Why: Linked description: a current forces electrons through a barrier (1) and trapped/not trapped charge represents 1s and 0s (1).

Some marks1/2

The data is stored in flash memory chips.

Why: Gives the creditworthy point that data is stored on flash memory chips (1) but does not develop it, e.g. by saying the data is held as electrical charges or by describing trapped electrons.

No marks0/2

The data is stored as magnetised areas on a spinning platter.

Why: This describes magnetic storage, which the mark scheme says not to accept for a solid state drive.

3Describe2 marksEmbedded Systems Swap Remove

Many modern devices contain embedded systems.

Describe what is meant by the term embedded system.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • It is a computer/processor built into a larger device (1) to carry out a single dedicated task/function (1)
  • It is a combination of a processor, memory and input/output in one unit (1) that controls the device it is part of (1)
  • It is a computer that forms part of another device (1) so it is not used as a general purpose computer (1)

Allow 'forms part of another device' or 'inside another device' for the first mark.

Do not award the second mark for a separate fact that is not linked to the first point, e.g. 'It is built into a device and it uses little power' would earn only the first mark (1).

Do not accept 'a small computer' on its own, with no reference to being part of another device or performing a dedicated task.

Do not accept 'a computer that controls a device' on its own, with no reference to it being built into/part of a larger device or carrying out a dedicated task.

Do not accept 'it performs a single dedicated task' on its own, with no reference to it being built into/part of a larger device.

Do not accept descriptions of a general purpose computer, e.g. 'it can run many different programs' or 'new software can be installed'.

Do not accept 'it is a system that is embedded in another system' as this repeats the term in the question.

Example answers and how they were marked
Full marks2/2

An embedded system is a computer built into a larger device to carry out one specific/dedicated task

Why: Linked point (1) that it is built into a larger device, developed (1) with the dedicated task it performs.

Some marks1/2

It is a small computer that is inside another device.

Why: First point only (1) - inside/part of another device - with no linked development of a dedicated task.

No marks0/2

It is a computer that controls a device.

Why: Near-miss: only says it controls a device, with no reference to being built into/part of a larger device or a dedicated task, so no marks.

4Explain2 marksEmbedded Systems Swap Remove

An engine control unit (ECU) in a car is an embedded system.

Explain one benefit of using an embedded system for the engine control unit instead of a general purpose computer.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • (The ECU) is more reliable/less likely to crash (1) because it only runs the one program/has a single purpose (1)
  • (The ECU) cannot be affected by other software/viruses (1) because it cannot run other software/it can only run the program it was made for (1)
  • (The ECU) is cheaper (1) because it has limited processing resources/less memory/simple components (1)
  • (The ECU) uses less power (1) because it has limited processing resources/a simpler processor (1)
  • (The ECU) is smaller (1) because it has fewer components/less memory than a general purpose computer (1)

For both marks, the expansion must follow/associate with the statement.

A suitable benefit stated on its own earns one mark.

Do not accept a description or a location given as the reason, e.g. 'because it is part of the car', 'because it is inside the engine', 'because it is embedded'.

Do not accept a description of an embedded system on its own as the benefit, e.g. 'it does one specific job' or 'it is part of the car'.

Do not accept 'it is faster'/'it has a more powerful processor' as embedded systems have limited processing resources.

Example answers and how they were marked
Full marks2/2

It is more reliable than a general purpose computer because it only runs the one program so it will not crash and stop the engine working.

Why: Benefit stated (1) with a linked reason (1); the reason shows why only running one program makes it reliable.

Some marks1/2

It is more reliable because it is part of the car's engine.

Why: Only the benefit earns a mark (1); being part of the car is a location, not a linked reason why it is reliable.

No marks0/2

It is faster than a general purpose computer because it is embedded in the engine.

Why: Misconception that an embedded system is faster; embedded systems have limited processing resources, so neither point nor reason is creditworthy.

5Discuss6 marksEmbedded Systems Swap Remove

A technology company is developing a new fitness tracker. The tracker is worn on the wrist and monitors the wearer's heart rate, the number of steps taken and their sleep. It has a rechargeable battery and a touch screen.

Discuss the use of embedded systems in the fitness tracker.

Your answer should include:

  • what an embedded system is.
  • the functions embedded systems perform in the tracker.
  • why an embedded system is suitable for this device.
[6 marks]
Mark scheme

Indicative content

What an embedded system is

  • An embedded system is a computer system that forms part of a larger device, such as the fitness tracker.
  • It performs a single, dedicated or specific task rather than being a general purpose computer.
  • It is often built around a microcontroller, which contains the processor, RAM and ROM on a single chip.
  • Its software is held in ROM so the tracker can run its program as soon as it is switched on.

Functions in the tracker

  • Monitoring the heart rate using a sensor and processing the readings so that they can be displayed on the screen.
  • Counting steps using an accelerometer and using the count to calculate the distance walked or the calories burned.
  • Tracking sleep by monitoring the wearer's movement during the night.
  • Controlling the touch screen so that the user can move between displays.
  • Managing the battery, for example stopping the charging when the battery is full and saving power when the tracker is idle.
  • Sending the collected data to a smartphone using Bluetooth so that it can be viewed in an app. Accept any other specific function of the fitness tracker that an embedded system could control.

Why an embedded system is suitable for this device

  • It has low power consumption, so the battery lasts longer between charges, which matters for a device that is worn all day.
  • It is small and light, so it can be fitted into a wristband.
  • Its dedicated function means it does not need a full operating system, so it is reliable and does not need restarting.
  • The program is small and stored in ROM, so the tracker needs only a small amount of memory.
  • It can be optimised for its specific tasks, so it responds quickly to the readings from its sensors.
  • The low cost per unit keeps the tracker affordable for the customer.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover what an embedded system is, the functions it performs in the tracker and why it is suitable for the tracker.
  • Do not award installing new software/apps, functions the tracker does not perform (such as playing music) or 'it is like a phone'.
Example answers and how they were marked
Full marks6/6

An embedded system is a computer system that forms part of a larger device and performs a single, dedicated task. In the tracker it is built around a microcontroller, which has the processor, RAM and ROM on one chip, and its program is stored in ROM so it runs as soon as the tracker is switched on. The embedded system monitors the heart rate using a sensor and processes the readings before showing them on the screen. Another function counts the steps using an accelerometer and uses that count to work out the distance walked and the calories burned, and further functions monitor movement at night to track sleep and send the data to a smartphone by Bluetooth. The embedded system also controls the touch screen and manages the battery so that charging stops when it is full and power is saved when the tracker is idle. An embedded system is suitable because it has low power consumption, so the battery lasts longer between charges, which matters for a device that is worn all day and cannot be charged constantly. It is also small and light, so it fits into a wristband, and because it is dedicated to a few tasks it does not need a full operating system, so it is reliable and can be optimised to respond quickly to its sensors. Keeping the cost low also makes the tracker affordable for the customer.

Why: Comprehensive definition including the microcontroller and ROM (AO1), a range of functions each applied to the tracker (heart rate, steps, sleep, Bluetooth, touch screen, battery), and suitability points developed with reasons (low power for a device worn all day, small size for a wristband, dedicated design for reliability and quick response). Sustained lines of reasoning, all three bullets covered: Level 3 (5-6) clearly met.

Some marks2/6

An embedded system is a small computer inside a device. In a fitness tracker it can monitor your heart rate and count your steps. It is suitable because it is small and does not use much power.

Why: Basic independent points only: a basic definition, two functions and one basic suitability point, with no development and almost no application to the tracker (no explanation of why small size or low power matter). Level 1 (1-2 marks), upper end because there are several independent correct points, but no linkage or reasoning for Level 2.

No marks0/6

An embedded system is a computer that you can install apps on. The fitness tracker uses it to play music and send texts. It is suitable because it is like a phone.

Why: The definition is the opposite of an embedded system (it cannot install new software), the functions are ones the tracker does not perform and 'it is like a phone' is not a suitability point. No rewardable content: Level 0 (0 marks).

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.