Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Short recall2 marksSecondary Memory Swap Remove

Computers have both primary storage and secondary storage.

Define the term secondary storage.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • (Storage that is) non-volatile / keeps its data when the power is turned off (1)
  • (Storage that is) used to store programs and data/files (for later use) (1)
  • (Storage that is) not directly accessible by the CPU / not directly accessed by the CPU (1)

Allow both the non-volatile point and the stores programs and data point from one sentence if each idea is clearly stated, e.g. 'non-volatile storage that holds programs and data'.

Allow accessed via the CPU / must be copied into RAM before the CPU can use it for the third point.

Do not accept volatile / loses its data when the power is turned off.

Do not accept a description of primary storage, such as RAM or ROM.

Do not accept capacity.

Do not accept an example device on its own (e.g. hard disk drive).

Example answers and how they were marked
Full marks2/2

Secondary storage is non-volatile, so it does not lose data when the power is turned off. It is used to store programs and data files for later use.

Why: Non-volatile / keeps data when the power is off (1) and used to store programs and data files (1), each idea clearly stated.

Some marks1/2

Secondary storage is used to store programs and data files.

Why: Stores programs and data/files (1), but nothing is said about it being non-volatile or not directly accessible by the CPU.

No marks0/2

Secondary storage is volatile memory that holds the data the CPU is using at the moment.

Why: Describes primary storage (RAM) and says it is volatile, which the mark scheme says not to accept, so no marks are awarded.

2Describe2 marksSecondary Memory Swap Remove

Computers use secondary storage.

Describe the role of secondary storage.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Stores programs (including the operating system) and data that are not currently in use (1) so that they can be loaded into RAM/main memory when needed (1)
  • Keeps files/programs/data when the power is turned off (1) which happens because it is non-volatile (1)
  • Stores files/data for backup or archiving (1) so that they can be recovered if the originals are lost/corrupted (1)

A correct role on its own earns one mark; the second mark requires a linked development.

Accept either order if both the role and the link are given.

Do not accept 'it is non-volatile' on its own, unless it is linked to keeping data when the power is turned off.

Do not accept answers that only name a storage type (magnetic, optical, solid state) without describing a role.

Do not accept responses that describe primary storage/RAM, e.g. storing the data/instructions the CPU is currently working on, or that secondary storage makes the computer run faster.

Example answers and how they were marked
Full marks2/2

Secondary storage stores programs and data that are not currently in use so that they can be loaded into RAM when they are needed.

Why: Role point (1) linked to loading into RAM when needed (1).

Some marks1/2

It stores files and programs that are not currently in use.

Why: Correct role on its own earns one mark (1); no linked development, so the second mark is not awarded.

No marks0/2

It holds the data and instructions the CPU is working on so the computer runs faster.

Why: Describes primary storage/RAM and a speed benefit, which the mark scheme does not accept; no role of secondary storage is given.

3Explain2 marksPrimary Memory Swap Remove

A technician increases the amount of RAM in a laptop from 8 GiB to 16 GiB.

Explain one benefit of increasing the amount of RAM in a computer.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • More applications/programs can be open/run at the same time (1) because more instructions and data can be held in main memory at once (1)
  • Programs run faster (1) because the CPU does not have to wait for instructions/data to be read/transferred from slower secondary storage (1)
  • The CPU waits/idles for less time (1) because instructions and data can be transferred to the CPU more quickly from RAM (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'more files/photos/documents can be stored' or 'the computer has more storage' - this is a benefit of secondary storage, not RAM.

Do not accept 'the CPU becomes faster' or 'the clock speed increases'.

Example answers and how they were marked
Full marks2/2

More programs can be open at the same time because more instructions and data can be held in main memory at once.

Why: Linked point (1) for more programs running at the same time and reason (1) for more instructions and data being held in main memory at once.

Some marks1/2

Programs will run faster.

Why: Point (1) only; no linked reason such as the CPU not having to wait for data from slower secondary storage.

No marks0/2

There will be more space to save files and documents on the laptop.

Why: Misconception: the benefit given is a benefit of secondary storage, which the mark scheme's 'Do not accept' line rules out.

4Discuss6 marksEmbedded Systems Swap Remove

A supermarket is replacing its staffed checkouts with self-service checkouts. Each checkout has a touchscreen, a barcode scanner and weighing scales. The supermarket wants the checkouts to be reliable and quick to respond.

Discuss why the supermarket should use embedded systems in its self-service checkouts rather than general-purpose computers.

Your answer should consider:

  • the characteristics of embedded systems
  • what self-service checkouts use embedded systems for
  • how embedded systems compare with general-purpose computers

You do not need to consider the cost of the materials used in the checkout.

[6 marks]
Mark scheme

Indicative content

Characteristics of embedded systems

  • An embedded system performs a single, dedicated task, so each self-service checkout is built only to scan, weigh and price items and cannot be used for any other job.
  • An embedded system has limited processing resources and storage, which is enough for the checkout to scan barcodes, weigh items and display prices.
  • An embedded system normally has a simple operating system held in ROM, so a checkout is less likely to fail while a customer is using it.
  • Embedded systems have low power consumption, so a row of checkouts can be left running all day without using much electricity.
  • Embedded systems are small and low cost per unit, so one can be built into each checkout unit and the supermarket can afford one at every till.
  • An embedded system has a limited user interface, so the checkout only shows its own screens to the customer.
  • The firmware of an embedded system is not normally changed by the customer, although a technician can update it when the supermarket changes the checkout's software.

Uses of embedded systems in the checkout

  • The checkout uses an embedded system to read the barcode scanner, so the correct price for each item is found quickly.
  • The checkout uses an embedded system to read the weighing scales, so the weight of the items can be checked against the product that was scanned.
  • The checkout uses an embedded system to control the touchscreen that shows the customer what to do and how much to pay.
  • The checkout uses an embedded system to respond quickly to each scan, because it only carries out the checkout's own tasks, which keeps the queues moving.
  • The checkout uses an embedded system so that it keeps working for long periods without being restarted, which means customers can use it without a member of staff.

Comparison with general-purpose computers

  • A general-purpose computer can run many different programs, whereas the checkout's embedded system runs one dedicated program, so it cannot be used for other jobs.
  • A general-purpose computer loads a full operating system when it starts and has other software running, so it can slow down or need restarting, whereas the checkout is not slowed down by other programs.
  • A general-purpose computer has far more processing power and memory than the checkout needs, so using one would be more expensive and would take up more space than an embedded system.
  • A general-purpose computer is designed for users to install new software, but the checkout's embedded system runs fixed firmware, so customers cannot change what the checkout does.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must consider both the characteristics of embedded systems and what the checkout uses them for, and must make a comparison with a general-purpose computer. Answers that only list characteristics or checkout tasks without linking them to the checkout are limited to Level 1.

Do not accept claims that embedded systems are faster than general-purpose computers or that they can run many different programs, as embedded systems have limited processing resources and carry out a single, dedicated task.

Example answers and how they were marked
Full marks6/6

An embedded system performs a single, dedicated task, so each self-service checkout is built only to scan items, weigh them and show prices. This suits the supermarket because the checkout does one job well instead of being used for anything else. The checkout uses its embedded system to read the barcode scanner, so the correct price is found quickly, and to read the weighing scales, so the weight of the items can be checked against the product that was scanned. It also controls the touchscreen that shows the customer what to do.

Embedded systems have limited processing resources and storage, which is more than enough for these tasks. Because they use a simple operating system held in ROM, they are less likely to fail while a customer is using them, so customers do not need a member of staff. They also have low power consumption, so a row of checkouts can run all day without using much electricity, and they are small and low cost per unit, so the supermarket can afford one at every till.

A general-purpose computer, by contrast, runs many programs and loads a full operating system, so it can slow down or need restarting and it is more expensive and bigger than the checkout needs. The embedded system runs fixed firmware, so customers cannot install software on the checkout, which keeps it reliable and quick to respond, and this is why it meets the supermarket's requirements better.

Why: Comprehensive understanding with sustained lines of reasoning: characteristics (single dedicated task, limited resources, simple operating system in ROM, low power, small and low cost) and uses (scanner, scales, touchscreen) are all applied to the checkout, and each is compared with a general-purpose computer. Meets the Level 3 guidance for a 6-mark answer.

Some marks2/6

Embedded systems are small and cheap. The checkout needs to scan items and weigh them. An embedded system can do this. It is reliable. A general-purpose computer could also do it but might crash more.

Why: Basic, independent points with little linkage or application: one characteristic (small and cheap), one use (scanning and weighing) and a brief comparison (a general-purpose computer might crash more). No line of reasoning is developed, so it is Level 1, top of the band, not Level 2.

No marks0/6

Embedded systems are better than normal computers because they are faster and can run lots of different programs. The checkout needs to be fast so it should use an embedded system.

Why: Level 0. Both claims are misconceptions that the mark scheme tells examiners not to accept (embedded systems have limited processing resources and run a single, dedicated program), and the last sentence only repeats the stem's requirement for quick responses, so there is no rewardable content.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.