Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Short recall2 marksSecondary Memory Swap Remove

A computer uses secondary storage to keep programs and data.

Give two examples of secondary storage devices that store data using magnetic media.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Hard disk drive/HDD (1)
  • External/portable hard disk drive (1)
  • Magnetic tape drive (1)
  • Magnetic tape (1)

Allow a named device or the storage media type, e.g. hard disk/hard disc for hard disk drive, tape for magnetic tape

Allow floppy disk/floppy disk drive

Do not accept solid state devices (SSD, USB flash drive/memory stick, SD card/memory card) or optical media (CD/DVD/Blu-ray) as these do not store data using magnetism

Example answers and how they were marked
Full marks2/2

Hard disk drive and magnetic tape

Why: Hard disk drive (1) and magnetic tape (1) are both magnetic secondary storage, so both marks are awarded.

Some marks1/2

Hard disk drive and SD card

Why: Hard disk drive is magnetic (1); an SD card is solid state, not magnetic, so the second mark is not awarded.

No marks0/2

CD and DVD

Why: Both are optical media, which the mark scheme says not to accept, so no marks are awarded.

2Short recall2 marksEmbedded Systems Swap Remove

An embedded system is a computer system built into another device to perform a specific function.

Give two examples of devices that contain an embedded system.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Microwave (oven) (1)
  • Washing machine (1)
  • Dishwasher (1)
  • Digital camera (1)
  • Satellite navigation/satnav system (1)
  • Traffic light(s) (1)
  • Central heating controller/thermostat (1)
  • Digital watch/fitness tracker (1)
  • Vending machine (1)
  • Car (as it contains embedded systems) (1)

Allow any other device that contains an embedded system.

Do not accept general purpose devices such as a laptop, desktop computer, tablet or smartphone (these can run many different programs).

Example answers and how they were marked
Full marks2/2

A microwave oven and a washing machine.

Why: Two creditworthy devices, a microwave oven (1) and a washing machine (1).

Some marks1/2

A dishwasher and a laptop computer.

Why: Dishwasher credited (1); laptop is a general purpose device, so not accepted.

No marks0/2

A desktop computer and a smartphone.

Why: Both are general purpose devices, so neither earns a mark.

3Describe2 marksStored Program Computers Swap Remove

The CPU contains an arithmetic logic unit (ALU).

Describe the purpose of the arithmetic logic unit (ALU).

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Carries out arithmetic operations/calculations, such as addition or subtraction (1) so that the result can be stored in a register (1)
  • Carries out logical operations, such as comparing two data items (1) to see which one is greater/larger (1)
  • Compares two data items (1) to decide whether a condition is true / which path a program takes next (1)

Allow the result of an arithmetic or logical operation being held/stored in a register, but only where the operation is named.

Do not accept answers that say the ALU stores data or results without naming an operation (registers/main memory store data).

Do not accept answers about controlling components, decoding instructions or timing (that is the control unit or the clock).

Do not award credit for 'it processes data' on its own; an arithmetic or a logical operation must be named.

An example on its own, e.g. 'it adds two numbers', does not earn a second mark; the second mark needs a linked development.

Example answers and how they were marked
Full marks2/2

The ALU carries out arithmetic operations such as addition and subtraction, and the result of the calculation is stored in a register.

Why: Linked point (1) for arithmetic operations with an example, and development (1) for the result being stored in a register.

Some marks1/2

It does all the calculations in the CPU, for example adding two numbers together.

Why: Point (1) for arithmetic operations/calculations named with an example; no linked development, so the second mark is not earned.

No marks0/2

It stores the results of calculations so that they can be used by the CPU later.

Why: Storing results with no arithmetic or logical operation named, which the 'Do not accept' line rules out, so no mark is earned.

4Discuss6 marksPrimary Memory Swap Remove

An employee is writing a report on a laptop. There is a power cut and the laptop turns off. When power is restored, the employee cannot find the report file.

Discuss the role of RAM in this situation.

Your answer should include:

  • why the report was lost
  • the difference between RAM and secondary storage
  • how the employee could prevent this in future.
[6 marks]
Mark scheme

Indicative content

Why the report was lost

  • The report was being created and edited in RAM, which is volatile.
  • Volatile memory loses its contents when the power supply is removed.
  • The power cut removed the power, so the data in RAM was lost.
  • The report had not been saved to secondary storage before the power cut.
  • Only data that had been saved to secondary storage would remain after the power cut.

The difference between RAM and secondary storage

  • RAM is volatile and holds data temporarily while the computer is on.
  • Secondary storage is non-volatile and keeps data permanently when the power is off.
  • RAM is directly accessible by the CPU and is much faster than secondary storage.
  • Secondary storage has a larger capacity and is cheaper per gigabyte than RAM.
  • RAM holds the programs and data currently in use; secondary storage holds files for long-term storage.

How the employee could prevent this in future

  • The employee should save the report regularly to secondary storage, such as the hard drive or a USB flash drive.
  • The employee could enable autosave or autosave/recovery features in the word processor.
  • The employee could use cloud storage that saves changes automatically.
  • The employee could use an uninterruptible power supply (UPS) or battery to keep the laptop on during a power cut.
  • The employee should not rely on RAM to keep work permanently.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must explain that RAM is volatile and contrast this with non-volatile secondary storage.
  • Do not award marks for stating that the report was lost from secondary storage unless it had been saved there.
Example answers and how they were marked
Full marks6/6

The report was lost because it was being held in RAM, which is volatile memory. RAM only keeps its contents while the computer has power. When the power cut happened, the laptop turned off and everything in RAM was lost, including the unsaved report. RAM is different from secondary storage because secondary storage is non-volatile and keeps data permanently even when the power is off. For example, the hard drive would still contain the report if it had been saved. RAM is also much faster than secondary storage and is used for programs and data currently in use. To prevent this in future, the employee should save the report regularly to the hard drive or use autosave. They could also save to cloud storage, which saves automatically, or use a UPS to keep the laptop running during a power cut.

Why: Comprehensive understanding of RAM volatility, clear contrast with non-volatile secondary storage, and well-linked prevention methods applied to the employee's situation.

Some marks4/6

The report was lost because it was in RAM. RAM is temporary memory and it loses data when the power goes off. Secondary storage is permanent, so if the employee had saved the report it would still be there. RAM is faster than secondary storage. To prevent it, they should save their work.

Why: Adequate understanding shown through the volatility of RAM and the difference from permanent secondary storage, but the answer lacks detail about why the report was specifically lost and gives only a brief prevention method.

No marks0/6

The report was lost from the hard drive because the power cut erased it. RAM is permanent storage, so the report should have been saved there. The employee should buy more RAM to stop this happening again.

Why: No creditworthy points. The answer wrongly says the report was lost from the hard drive and that RAM is permanent storage, and it suggests more RAM will prevent power-loss data loss. These are misconceptions.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.