Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 687 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 8 marks

Pick again
Print
1Short recall2 marksSecondary Memory Swap Remove

A computer uses secondary storage to keep programs and data.

Give two examples of secondary storage devices that store data using magnetic media.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Hard disk drive/HDD (1)
  • External/portable hard disk drive (1)
  • Magnetic tape drive (1)
  • Magnetic tape (1)

Allow a named device or the storage media type, e.g. hard disk/hard disc for hard disk drive, tape for magnetic tape

Allow floppy disk/floppy disk drive

Do not accept solid state devices (SSD, USB flash drive/memory stick, SD card/memory card) or optical media (CD/DVD/Blu-ray) as these do not store data using magnetism

Example answers and how they were marked
Full marks2/2

Hard disk drive and magnetic tape

Why: Hard disk drive (1) and magnetic tape (1) are both magnetic secondary storage, so both marks are awarded.

Some marks1/2

Hard disk drive and SD card

Why: Hard disk drive is magnetic (1); an SD card is solid state, not magnetic, so the second mark is not awarded.

No marks0/2

CD and DVD

Why: Both are optical media, which the mark scheme says not to accept, so no marks are awarded.

2Describe2 marksStored Program Computers Swap Remove

The CPU contains an arithmetic logic unit (ALU).

Describe the purpose of the arithmetic logic unit (ALU).

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Carries out arithmetic operations/calculations, such as addition or subtraction (1) so that the result can be stored in a register (1)
  • Carries out logical operations, such as comparing two data items (1) to see which one is greater/larger (1)
  • Compares two data items (1) to decide whether a condition is true / which path a program takes next (1)

Allow the result of an arithmetic or logical operation being held/stored in a register, but only where the operation is named.

Do not accept answers that say the ALU stores data or results without naming an operation (registers/main memory store data).

Do not accept answers about controlling components, decoding instructions or timing (that is the control unit or the clock).

Do not award credit for 'it processes data' on its own; an arithmetic or a logical operation must be named.

An example on its own, e.g. 'it adds two numbers', does not earn a second mark; the second mark needs a linked development.

Example answers and how they were marked
Full marks2/2

The ALU carries out arithmetic operations such as addition and subtraction, and the result of the calculation is stored in a register.

Why: Linked point (1) for arithmetic operations with an example, and development (1) for the result being stored in a register.

Some marks1/2

It does all the calculations in the CPU, for example adding two numbers together.

Why: Point (1) for arithmetic operations/calculations named with an example; no linked development, so the second mark is not earned.

No marks0/2

It stores the results of calculations so that they can be used by the CPU later.

Why: Storing results with no arithmetic or logical operation named, which the 'Do not accept' line rules out, so no mark is earned.

3Describe2 marksEmbedded Systems Swap Remove

Many modern devices contain embedded systems.

Describe what is meant by the term embedded system.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • It is a computer/processor built into a larger device (1) to carry out a single dedicated task/function (1)
  • It is a combination of a processor, memory and input/output in one unit (1) that controls the device it is part of (1)
  • It is a computer that forms part of another device (1) so it is not used as a general purpose computer (1)

Allow 'forms part of another device' or 'inside another device' for the first mark.

Do not award the second mark for a separate fact that is not linked to the first point, e.g. 'It is built into a device and it uses little power' would earn only the first mark (1).

Do not accept 'a small computer' on its own, with no reference to being part of another device or performing a dedicated task.

Do not accept 'a computer that controls a device' on its own, with no reference to it being built into/part of a larger device or carrying out a dedicated task.

Do not accept 'it performs a single dedicated task' on its own, with no reference to it being built into/part of a larger device.

Do not accept descriptions of a general purpose computer, e.g. 'it can run many different programs' or 'new software can be installed'.

Do not accept 'it is a system that is embedded in another system' as this repeats the term in the question.

Example answers and how they were marked
Full marks2/2

An embedded system is a computer built into a larger device to carry out one specific/dedicated task

Why: Linked point (1) that it is built into a larger device, developed (1) with the dedicated task it performs.

Some marks1/2

It is a small computer that is inside another device.

Why: First point only (1) - inside/part of another device - with no linked development of a dedicated task.

No marks0/2

It is a computer that controls a device.

Why: Near-miss: only says it controls a device, with no reference to being built into/part of a larger device or a dedicated task, so no marks.

4Explain2 marksFetch Decode Execute Cycle Swap Remove

The von Neumann architecture is used in most computers.

Explain one feature of the von Neumann stored program concept.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The instructions/program instructions and data are stored together in main memory/RAM (1) so the CPU can fetch each instruction (from its address) and execute it (1)
  • The instructions/program instructions are held in main memory/RAM (1) rather than being built into/part of the hardware, so the computer does not need to be rewired/rebuilt to run a different program (1)
  • The next instruction to be executed/instruction is held in main memory/RAM (1) so the CPU can fetch it using its address before it is decoded and executed (1)

For both marks, the expansion must follow/associate with the statement.

A point/statement on its own can only earn one mark.

Do not accept a response that only refers to data being stored in main memory/RAM without referring to the instructions/program instructions.

Do not accept instructions/programs being stored on the hard disk/backing store.

Do not accept 'the program is stored in memory' without saying that it is the instructions/program instructions that are stored there.

Example answers and how they were marked
Full marks2/2

Both the instructions of the program and the data it uses are stored together in the same main memory, so the CPU can fetch each instruction in turn and execute it.

Why: Linked point (1) and reason (1).

Some marks1/2

The instructions of the program are stored in main memory.

Why: Point only (1); no linked reason about fetching/executing the instructions.

No marks0/2

The program is stored on the hard disk and is copied into the CPU when it is run.

Why: Misconception covered by the 'Do not accept' line: the instructions must be stored in main memory/RAM, not on the hard disk/backing store, for the CPU to fetch them.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 30
Malware 18 questions Social Engineering 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.