Edexcel GCSE Computer Science (1CP2) Exam Questions

Award one mark for any of the following up to a maximum of two marks:

• Hard disk drive/HDD (1)
• External/portable hard disk drive (1)
• Magnetic tape drive (1)
• Magnetic tape (1)

Allow a named device or the storage media type, e.g. hard disk/hard disc for hard disk drive, tape for magnetic tape

Allow floppy disk/floppy disk drive

Do not accept solid state devices (SSD, USB flash drive/memory stick, SD card/memory card) or optical media (CD/DVD/Blu-ray) as these do not store data using magnetism

Award up to two marks for a linked description such as:

• The program's instructions (and the data it uses) are held in main memory/RAM (1) so the CPU fetches both the instructions and the data from that one memory (1)
• The CPU fetches the next instruction from main memory/RAM (1) using the address of the memory location that holds it (1)
• The CPU reads/fetches data from main memory/RAM (1) when an instruction needs it and writes the result back to main memory/RAM (1)
• The program's instructions are held in main memory/RAM while the program runs (1) and the CPU fetches them one at a time/one after another to be decoded and executed (1)

Allow 'memory' for main memory/RAM.

Allow 'gets' for fetches/reads.

For both marks, the development must say what the CPU does with the contents of main memory (fetches/reads/writes), not just that main memory is used.

Do not accept answers about the program being stored in secondary storage, such as on a hard drive, or about it being loaded from there.

Do not accept benefits such as the computer running faster or being easier for the user.

Do not accept naming CPU components (control unit, arithmetic logic unit, registers) or buses on their own, without saying what is stored or fetched.

Do not accept 'the computer stores data' on its own, without a link to the instructions of a program.

Award up to two marks for a linked explanation such as:

• (The ECU) is more reliable/less likely to crash (1) because it only runs the one program/has a single purpose (1)
• (The ECU) cannot be affected by other software/viruses (1) because it cannot run other software/it can only run the program it was made for (1)
• (The ECU) is cheaper (1) because it has limited processing resources/less memory/simple components (1)
• (The ECU) uses less power (1) because it has limited processing resources/a simpler processor (1)
• (The ECU) is smaller (1) because it has fewer components/less memory than a general purpose computer (1)

For both marks, the expansion must follow/associate with the statement.

A suitable benefit stated on its own earns one mark.

Do not accept a description or a location given as the reason, e.g. 'because it is part of the car', 'because it is inside the engine', 'because it is embedded'.

Do not accept a description of an embedded system on its own as the benefit, e.g. 'it does one specific job' or 'it is part of the car'.

Do not accept 'it is faster'/'it has a more powerful processor' as embedded systems have limited processing resources.

Indicative content

What embedded systems are used for in the drone

• An embedded system is a computer built into a larger device that performs a single, dedicated function as part of that device.
• The drone contains several embedded systems, and each one is dedicated to a task such as flight control, navigation, obstacle detection or battery monitoring rather than being a general-purpose computer.
• The flight controller embedded system processes data from the drone's sensors and changes the signals sent to the rotors, so the drone stays stable and can be steered while carrying a parcel.
• The GPS receiver embedded system works out the drone's position and uses it to navigate along the route to the customer's address.
• The camera embedded system captures images or video that are processed to detect obstacles, such as trees, buildings or overhead cables, in the drone's path.
• Sensor embedded systems, for example ultrasonic or infrared sensors, measure the distance to the ground and to obstacles so the drone can land and avoid collisions.
• The battery management and communication embedded systems monitor the charge and send the drone's status and location to the control centre, and the rotor-control embedded systems drive the rotors so the drone can take off, hover and land.

Benefits of using embedded systems in the drone

• Embedded systems use little power, so the drone can fly for longer and deliver more parcels on one charge.
• They are small and light, which is important because a heavier drone needs more power to stay in the air.
• Because each embedded system is dedicated to one task, it can respond quickly and reliably, so the drone can change direction in time to avoid an obstacle.
• Combining the processor, memory and input/output in one unit reduces the number of separate components and the cost per drone, so a fleet of delivery drones is cheaper to build.
• Embedded systems allow the drone to fly autonomously, so the company does not need a human pilot for every delivery.
• Programs are held in ROM, so the drone's behaviour is consistent and predictable each time it flies.

Any drawbacks or limitations of using embedded systems in the drone

• Each embedded system has limited processing power, so the drone may not be able to run complex obstacle-recognition software and could fail to identify an unusual obstacle.
• They have limited storage and RAM, so the drone cannot store much flight data or video on board and must send it to the control centre.
• The software is held in ROM and is difficult to update, so fixing a bug or adding a new feature may mean returning the drone or connecting it to a computer.
• The embedded systems are dedicated to the drone, so they cannot easily be reused for a different task if the drone is retired.
• If an embedded system fails, the drone may crash, which could injure people or damage property, so robustness is essential.
• A general-purpose computer would be too large and heavy for the drone, so the drone has to use these limited dedicated systems and cannot run general-purpose software.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 responses must cover what embedded systems are used for in the drone and both benefits and drawbacks/limitations, with reasoning applied to the delivery drone. Do not accept general-purpose computer uses such as connecting to Wi-Fi to play videos, installing new software, apps or games, or using a server; do not accept the drone itself as a single embedded system unless a specific dedicated function is explained.
• A definition of an embedded system on its own, with no application to the drone, cannot lift an answer above Level 1; limited storage and inability to be repurposed must be linked to the drone, for example little flight data can be stored or the system cannot be reused for another task, to gain credit.

Indicative content

Characteristics of embedded systems

• An embedded system performs a single, dedicated task, so each self-service checkout is built only to scan, weigh and price items and cannot be used for any other job.
• An embedded system has limited processing resources and storage, which is enough for the checkout to scan barcodes, weigh items and display prices.
• An embedded system normally has a simple operating system held in ROM, so a checkout is less likely to fail while a customer is using it.
• Embedded systems have low power consumption, so a row of checkouts can be left running all day without using much electricity.
• Embedded systems are small and low cost per unit, so one can be built into each checkout unit and the supermarket can afford one at every till.
• An embedded system has a limited user interface, so the checkout only shows its own screens to the customer.
• The firmware of an embedded system is not normally changed by the customer, although a technician can update it when the supermarket changes the checkout's software.

Uses of embedded systems in the checkout

• The checkout uses an embedded system to read the barcode scanner, so the correct price for each item is found quickly.
• The checkout uses an embedded system to read the weighing scales, so the weight of the items can be checked against the product that was scanned.
• The checkout uses an embedded system to control the touchscreen that shows the customer what to do and how much to pay.
• The checkout uses an embedded system to respond quickly to each scan, because it only carries out the checkout's own tasks, which keeps the queues moving.
• The checkout uses an embedded system so that it keeps working for long periods without being restarted, which means customers can use it without a member of staff.

Comparison with general-purpose computers

• A general-purpose computer can run many different programs, whereas the checkout's embedded system runs one dedicated program, so it cannot be used for other jobs.
• A general-purpose computer loads a full operating system when it starts and has other software running, so it can slow down or need restarting, whereas the checkout is not slowed down by other programs.
• A general-purpose computer has far more processing power and memory than the checkout needs, so using one would be more expensive and would take up more space than an embedded system.
• A general-purpose computer is designed for users to install new software, but the checkout's embedded system runs fixed firmware, so customers cannot change what the checkout does.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must consider both the characteristics of embedded systems and what the checkout uses them for, and must make a comparison with a general-purpose computer. Answers that only list characteristics or checkout tasks without linking them to the checkout are limited to Level 1.

Do not accept claims that embedded systems are faster than general-purpose computers or that they can run many different programs, as embedded systems have limited processing resources and carry out a single, dedicated task.