Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

3 questions · 10 marks

Pick again
Print
1Short recall2 marksSecondary Memory Swap Remove

A computer uses secondary storage to keep programs and data.

Give two examples of secondary storage devices that store data using magnetic media.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Hard disk drive/HDD (1)
  • External/portable hard disk drive (1)
  • Magnetic tape drive (1)
  • Magnetic tape (1)

Allow a named device or the storage media type, e.g. hard disk/hard disc for hard disk drive, tape for magnetic tape

Allow floppy disk/floppy disk drive

Do not accept solid state devices (SSD, USB flash drive/memory stick, SD card/memory card) or optical media (CD/DVD/Blu-ray) as these do not store data using magnetism

Example answers and how they were marked
Full marks2/2

Hard disk drive and magnetic tape

Why: Hard disk drive (1) and magnetic tape (1) are both magnetic secondary storage, so both marks are awarded.

Some marks1/2

Hard disk drive and SD card

Why: Hard disk drive is magnetic (1); an SD card is solid state, not magnetic, so the second mark is not awarded.

No marks0/2

CD and DVD

Why: Both are optical media, which the mark scheme says not to accept, so no marks are awarded.

2Explain2 marksSecondary Memory Swap Remove

A hard disk drive stores data on a spinning magnetic platter.

Explain how data is read from a magnetic hard disk.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The read/write head moves over the surface of the platter (1) and detects whether each area of the disk is magnetised (1)
  • The platter spins/rotates (1) so the read/write head can pass over the whole surface/tracks of the disk (1)
  • The pattern of magnetised and non-magnetised areas detected by the read/write head (1) is read as binary 1s and 0s (1)
  • The drive head detects the direction of magnetisation of each area (1) so the data can be read as binary (1)

For both marks, the expansion must follow/associate with the statement.

Allow one mark for stating that data is read magnetically / that the read/write head detects the magnetisation of the disk without a linked reason.

Do not accept answers that describe how data is written to the disk, such as the head magnetising the platter, rather than how it is read.

Do not accept 'a laser reads the pits and lands' - this describes optical storage, not magnetic storage.

Example answers and how they were marked
Full marks2/2

The platter rotates so the read/write head passes over the whole surface of the disk and it detects whether each area is magnetised or not. The pattern of magnetised areas is then read as 1s and 0s.

Why: Linked point (1) rotation of the platter with reason (1) the head reaches the whole surface, and the second line about magnetised areas is also present.

Some marks1/2

The read/write head detects the magnetic charges on the disk.

Why: Allow line (1): states the head detects the magnetisation of the disk, but gives no linked reason (e.g. the platter rotating so the head covers the whole surface), so only one mark.

No marks0/2

A laser shines onto the disk and reads the pits and lands, then the data is sent to the CPU.

Why: Describes optical storage. Do not accept 'a laser reads the pits and lands' - a magnetic disk is read by a head detecting magnetisation.

3Discuss6 marksPrimary Memory Swap Remove

An employee is writing a report on a laptop. There is a power cut and the laptop turns off. When power is restored, the employee cannot find the report file.

Discuss the role of RAM in this situation.

Your answer should include:

  • why the report was lost
  • the difference between RAM and secondary storage
  • how the employee could prevent this in future.
[6 marks]
Mark scheme

Indicative content

Why the report was lost

  • The report was being created and edited in RAM, which is volatile.
  • Volatile memory loses its contents when the power supply is removed.
  • The power cut removed the power, so the data in RAM was lost.
  • The report had not been saved to secondary storage before the power cut.
  • Only data that had been saved to secondary storage would remain after the power cut.

The difference between RAM and secondary storage

  • RAM is volatile and holds data temporarily while the computer is on.
  • Secondary storage is non-volatile and keeps data permanently when the power is off.
  • RAM is directly accessible by the CPU and is much faster than secondary storage.
  • Secondary storage has a larger capacity and is cheaper per gigabyte than RAM.
  • RAM holds the programs and data currently in use; secondary storage holds files for long-term storage.

How the employee could prevent this in future

  • The employee should save the report regularly to secondary storage, such as the hard drive or a USB flash drive.
  • The employee could enable autosave or autosave/recovery features in the word processor.
  • The employee could use cloud storage that saves changes automatically.
  • The employee could use an uninterruptible power supply (UPS) or battery to keep the laptop on during a power cut.
  • The employee should not rely on RAM to keep work permanently.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must explain that RAM is volatile and contrast this with non-volatile secondary storage.
  • Do not award marks for stating that the report was lost from secondary storage unless it had been saved there.
Example answers and how they were marked
Full marks6/6

The report was lost because it was being held in RAM, which is volatile memory. RAM only keeps its contents while the computer has power. When the power cut happened, the laptop turned off and everything in RAM was lost, including the unsaved report. RAM is different from secondary storage because secondary storage is non-volatile and keeps data permanently even when the power is off. For example, the hard drive would still contain the report if it had been saved. RAM is also much faster than secondary storage and is used for programs and data currently in use. To prevent this in future, the employee should save the report regularly to the hard drive or use autosave. They could also save to cloud storage, which saves automatically, or use a UPS to keep the laptop running during a power cut.

Why: Comprehensive understanding of RAM volatility, clear contrast with non-volatile secondary storage, and well-linked prevention methods applied to the employee's situation.

Some marks4/6

The report was lost because it was in RAM. RAM is temporary memory and it loses data when the power goes off. Secondary storage is permanent, so if the employee had saved the report it would still be there. RAM is faster than secondary storage. To prevent it, they should save their work.

Why: Adequate understanding shown through the volatility of RAM and the difference from permanent secondary storage, but the answer lacks detail about why the report was specifically lost and gives only a brief prevention method.

No marks0/6

The report was lost from the hard drive because the power cut erased it. RAM is permanent storage, so the report should have been saved there. The employee should buy more RAM to stop this happening again.

Why: No creditworthy points. The answer wrongly says the report was lost from the hard drive and that RAM is permanent storage, and it suggests more RAM will prevent power-loss data loss. These are misconceptions.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.