Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 8 marks

Pick again
Print
1Short recall2 marksSecondary Memory Swap Remove

A computer uses secondary storage to keep programs and data.

Give two examples of secondary storage devices that store data using magnetic media.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Hard disk drive/HDD (1)
  • External/portable hard disk drive (1)
  • Magnetic tape drive (1)
  • Magnetic tape (1)

Allow a named device or the storage media type, e.g. hard disk/hard disc for hard disk drive, tape for magnetic tape

Allow floppy disk/floppy disk drive

Do not accept solid state devices (SSD, USB flash drive/memory stick, SD card/memory card) or optical media (CD/DVD/Blu-ray) as these do not store data using magnetism

Example answers and how they were marked
Full marks2/2

Hard disk drive and magnetic tape

Why: Hard disk drive (1) and magnetic tape (1) are both magnetic secondary storage, so both marks are awarded.

Some marks1/2

Hard disk drive and SD card

Why: Hard disk drive is magnetic (1); an SD card is solid state, not magnetic, so the second mark is not awarded.

No marks0/2

CD and DVD

Why: Both are optical media, which the mark scheme says not to accept, so no marks are awarded.

2Describe2 marksEmbedded Systems Swap Remove

Many modern devices contain embedded systems.

Describe what is meant by the term embedded system.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • It is a computer/processor built into a larger device (1) to carry out a single dedicated task/function (1)
  • It is a combination of a processor, memory and input/output in one unit (1) that controls the device it is part of (1)
  • It is a computer that forms part of another device (1) so it is not used as a general purpose computer (1)

Allow 'forms part of another device' or 'inside another device' for the first mark.

Do not award the second mark for a separate fact that is not linked to the first point, e.g. 'It is built into a device and it uses little power' would earn only the first mark (1).

Do not accept 'a small computer' on its own, with no reference to being part of another device or performing a dedicated task.

Do not accept 'a computer that controls a device' on its own, with no reference to it being built into/part of a larger device or carrying out a dedicated task.

Do not accept 'it performs a single dedicated task' on its own, with no reference to it being built into/part of a larger device.

Do not accept descriptions of a general purpose computer, e.g. 'it can run many different programs' or 'new software can be installed'.

Do not accept 'it is a system that is embedded in another system' as this repeats the term in the question.

Example answers and how they were marked
Full marks2/2

An embedded system is a computer built into a larger device to carry out one specific/dedicated task

Why: Linked point (1) that it is built into a larger device, developed (1) with the dedicated task it performs.

Some marks1/2

It is a small computer that is inside another device.

Why: First point only (1) - inside/part of another device - with no linked development of a dedicated task.

No marks0/2

It is a computer that controls a device.

Why: Near-miss: only says it controls a device, with no reference to being built into/part of a larger device or a dedicated task, so no marks.

3Describe2 marksStored Program Computers Swap Remove

The control unit (CU) is a component inside the CPU.

Describe the role of the control unit in the fetch-decode-execute cycle.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Decodes each (fetched) instruction (1) to work out which operation is needed / which components should carry it out (1)
  • Coordinates/directs the other components (1) by sending control signals along the control bus (1)
  • Fetches the next instruction (1) by sending its address to main memory along the address bus (1)
  • Sends a read/write control signal to main memory (1) so that the instruction or data is transferred during the fetch/execute stage (1)

Do not accept answers about synchronising the CPU or timing the cycles (that is the role of the clock).

Do not accept answers about carrying out arithmetic or logical operations (that is the ALU).

Do not accept answers about holding data or the results of instructions (that is registers/main memory).

Do not accept generic answers that only say the CU controls the CPU or processes instructions, with no linked development.

Only award one mark for a response that only repeats that the CU sends control signals; the second mark needs a linked outcome such as coordination, a memory read/write, or fetching an instruction.

Do not accept 'during the decode stage' as the development for the decoding point, as it restates the question.

Example answers and how they were marked
Full marks2/2

It decodes the instruction that has been fetched so that it knows which operation the CPU must carry out and which components should do it.

Why: Decoding named with the acceptable wording 'each (fetched) instruction' (1), plus the linked development that this identifies the operation and components (1).

Some marks1/2

It decodes each instruction during the decode stage of the cycle.

Why: Earns (1) for decoding the instruction. 'During the decode stage' restates the question and is not accepted as a development, so the second mark is not earned.

No marks0/2

It carries out the calculations and comparisons when the instruction is executed.

Why: Calculations and comparisons are the ALU's role, which the 'Do not accept' line rules out, so no mark is earned.

4Explain2 marksPrimary Memory Swap Remove

A computer follows the von Neumann stored program concept. A program's instructions are stored on secondary storage before the program is run.

Explain one reason why the instructions of a program must be held in RAM before they can be executed.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The CPU can only fetch/read instructions from main memory/RAM (1) so the instructions of a running program must be copied/loaded into RAM before they can be executed (1)
  • RAM is faster to access than secondary storage (1) so the instructions can be fetched quickly enough for the CPU to execute them (1)
  • The CPU needs the instructions in RAM to fetch and execute them (1) because the fetch-decode-execute cycle reads each instruction from main memory/RAM (1)
  • The address of the next instruction is sent to RAM on the address bus (1) so the instruction can be transferred to the CPU/registers for decoding/execution (1)

For both marks, the expansion must follow/associate with the statement.

Allow the point and reason in either order if they are linked.

Do not accept answers that only say the CPU needs instructions, or that RAM is faster, without linking this to fetching/executing the instructions.

Do not accept answers that only say RAM holds data and instructions without linking this to the fetch-decode-execute cycle.

Do not accept 'RAM is permanent/non-volatile storage, so the instructions are kept safe' - RAM is volatile.

The response does not need to name the address bus or the fetch stage for full marks; a linked reason that explains why instructions must be in RAM (for example, the CPU can only fetch from RAM, or RAM is faster than secondary storage) is enough.

Example answers and how they were marked
Full marks2/2

The CPU can only fetch instructions from main memory, so the instructions of a running program must be copied into RAM before they can be executed.

Why: Linked point (1) for the CPU only being able to fetch instructions from main memory/RAM, and reason (1) for instructions being copied into RAM before execution.

Some marks1/2

The CPU can only fetch instructions from main memory.

Why: Point (1) only; there is no linked reason that explains why this means the instructions must be held in RAM before execution, such as RAM being faster than secondary storage.

No marks0/2

Instructions are kept in RAM because RAM is permanent storage and does not lose the instructions when the power is turned off.

Why: Misconception: RAM is described as permanent/non-volatile, which the mark scheme's 'Do not accept' line rules out; no creditworthy linked point.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.