A bus topology has a terminator at each end of its cable.
Explain why terminators are needed in a bus topology.
Mark scheme
Award up to two marks for a linked explanation such as:
- Terminators absorb the signal at the ends of the cable (1) so it is not reflected back along the bus (1)
- Terminators prevent signals reflecting/bouncing back (1) so the reflected signal does not corrupt data on the cable (1)
- Terminators absorb the signal (1) so it does not collide/interfere with data being sent by other devices (1)
- Terminators stop the signal reflecting back down the cable (1) so data can be transmitted and received without errors (1)
For both marks, the expansion must follow/associate with the statement.
Allow 'interfere'/'corrupt' only where the answer says the reflected signal mixes with/collides with data on the cable.
Do not accept 'to stop the signal' on its own, as stopping the signal is not the same as stopping it reflecting back along the cable.
Do not accept 'to terminate the cable/network', 'to end the cable' or 'to stop the cable breaking'.
Do not award responses that only repeat the stem, e.g. 'because there is a terminator at each end'.
Example answers and how they were marked
Terminators absorb the signal at each end of the cable (1) so that it does not reflect back along the bus (1).
Why: Linked point (1) and reason (1): absorbing the signal is linked to it not being reflected back along the bus.
Terminators absorb the signal at the ends of the cable.
Why: Awarded 1 mark for the point that the signal is absorbed, but no linked consequence is given.
They terminate the network so the cable does not break.
Why: No credit: it does not say the signal is absorbed or that reflections are prevented, and the mark scheme rejects 'to terminate the network' and 'to stop the cable breaking'.