Edexcel GCSE Computer Science (1CP2) Exam Questions

Award up to two marks for a linked description such as:

• Data is stored on (flash) memory chips/cells (1) as a pattern of electrical charges (1)
• A current/voltage forces electrons through a barrier (1) so that they are trapped (or not trapped) to hold/represent a value (1)
• Cells with a trapped charge and cells with no trapped charge (1) represent 1s and 0s/binary (1)
• The trapped charge remains when the power is turned off (1) so the data is not lost/it is non-volatile (1)

Do not accept responses that describe magnetic storage, e.g. magnetised platters, spinning disks or read/write heads, or optical storage, e.g. lasers, pits and lands.

Do not award a mark for 'it is solid state' or 'it has no moving parts' without a description of how the data is stored.

Do not award a mark for restating the stem, e.g. 'a laptop uses an SSD' or 'an SSD uses flash memory'.

'Data is stored as electrical charges' on its own, with no reference to memory chips/cells or to how the charge is held, earns a maximum of one mark (1).

A response that only describes electrons being trapped, with no link to how the value/data is represented, earns one mark (1). The second mark needs a link such as trapped and not trapped charge representing 1s and 0s, or the trapped charge being kept so the data is not lost.

Indicative content

Magnetic storage

• A magnetic hard disk drive stores data on a magnetic platter that spins, with a read/write head on an actuator arm that moves over its surface.
• The read/write head magnetises small areas of the platter to represent binary 1s and 0s, and reads the magnetic pattern back when the data is needed.
• The data is held on concentric tracks that are divided into sectors. (Accept data being stored magnetically without further detail, but a vague 'it uses a magnet' is not enough for this point.)
• The platter and the read/write head are sealed inside the drive unit because of the precision needed.

Solid state storage

• A solid state drive stores data in flash memory chips and has no moving parts.
• A large electric current forces electrons through a barrier and traps them in a floating gate; the presence or absence of this trapped charge represents a 1 or a 0. (Accept either convention for which charge state represents a 1 and which represents a 0.)
• The charged cells are detected to read the data back. (Accept: the data can be erased and rewritten by applying a new current.)
• As there is no disk to spin to the correct position and no arm to move, data can be read from and written to solid state storage very quickly.

Suitability for the company's video files

• A magnetic HDD has a very large capacity and is generally cheaper per gigabyte than an SSD of the same capacity, which suits a company that stores many large video files.
• An SSD has very fast read/write speeds, so the company's large video files open and save quickly while they are being edited.
• An SSD has no moving parts, so it is more durable if the company's computers are carried between filming locations.
• A magnetic HDD could store finished videos as an archive and an SSD could hold the project being edited, so the company gets high speed while editing and low-cost capacity for storage.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 answers must give accurate accounts of how data is stored on both magnetic and solid state storage and sustain a line of reasoning that applies at least one of them to the company's video files. An answer that covers only one storage type, or that describes both types without any application to the company, cannot go above Level 2.
• Do not accept descriptions of optical storage (pits and lands, a laser) as magnetic or solid state storage, and do not accept 'magnetic storage uses a laser' or 'solid state storage is volatile' or 'solid state storage is RAM'.

Indicative content

What embedded systems are used for in the drone

• An embedded system is a computer built into a larger device that performs a single, dedicated function as part of that device.
• The drone contains several embedded systems, and each one is dedicated to a task such as flight control, navigation, obstacle detection or battery monitoring rather than being a general-purpose computer.
• The flight controller embedded system processes data from the drone's sensors and changes the signals sent to the rotors, so the drone stays stable and can be steered while carrying a parcel.
• The GPS receiver embedded system works out the drone's position and uses it to navigate along the route to the customer's address.
• The camera embedded system captures images or video that are processed to detect obstacles, such as trees, buildings or overhead cables, in the drone's path.
• Sensor embedded systems, for example ultrasonic or infrared sensors, measure the distance to the ground and to obstacles so the drone can land and avoid collisions.
• The battery management and communication embedded systems monitor the charge and send the drone's status and location to the control centre, and the rotor-control embedded systems drive the rotors so the drone can take off, hover and land.

Benefits of using embedded systems in the drone

• Embedded systems use little power, so the drone can fly for longer and deliver more parcels on one charge.
• They are small and light, which is important because a heavier drone needs more power to stay in the air.
• Because each embedded system is dedicated to one task, it can respond quickly and reliably, so the drone can change direction in time to avoid an obstacle.
• Combining the processor, memory and input/output in one unit reduces the number of separate components and the cost per drone, so a fleet of delivery drones is cheaper to build.
• Embedded systems allow the drone to fly autonomously, so the company does not need a human pilot for every delivery.
• Programs are held in ROM, so the drone's behaviour is consistent and predictable each time it flies.

Any drawbacks or limitations of using embedded systems in the drone

• Each embedded system has limited processing power, so the drone may not be able to run complex obstacle-recognition software and could fail to identify an unusual obstacle.
• They have limited storage and RAM, so the drone cannot store much flight data or video on board and must send it to the control centre.
• The software is held in ROM and is difficult to update, so fixing a bug or adding a new feature may mean returning the drone or connecting it to a computer.
• The embedded systems are dedicated to the drone, so they cannot easily be reused for a different task if the drone is retired.
• If an embedded system fails, the drone may crash, which could injure people or damage property, so robustness is essential.
• A general-purpose computer would be too large and heavy for the drone, so the drone has to use these limited dedicated systems and cannot run general-purpose software.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 responses must cover what embedded systems are used for in the drone and both benefits and drawbacks/limitations, with reasoning applied to the delivery drone. Do not accept general-purpose computer uses such as connecting to Wi-Fi to play videos, installing new software, apps or games, or using a server; do not accept the drone itself as a single embedded system unless a specific dedicated function is explained.
• A definition of an embedded system on its own, with no application to the drone, cannot lift an answer above Level 1; limited storage and inability to be repurposed must be linked to the drone, for example little flight data can be stored or the system cannot be reused for another task, to gain credit.