Edexcel GCSE Computer Science (1CP2) exam questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Practice paper

4 questions · 16 marks

Pick again

1Describe2 marksSecondary Memory Swap Remove

Computers use secondary storage.

Describe the role of secondary storage.

[2 marks]

Mark scheme

Award up to two marks for a linked description such as:

Stores programs (including the operating system) and data that are not currently in use (1) so that they can be loaded into RAM/main memory when needed (1)
Keeps files/programs/data when the power is turned off (1) which happens because it is non-volatile (1)
Stores files/data for backup or archiving (1) so that they can be recovered if the originals are lost/corrupted (1)

A correct role on its own earns one mark; the second mark requires a linked development.

Accept either order if both the role and the link are given.

Do not accept 'it is non-volatile' on its own, unless it is linked to keeping data when the power is turned off.

Do not accept answers that only name a storage type (magnetic, optical, solid state) without describing a role.

Do not accept responses that describe primary storage/RAM, e.g. storing the data/instructions the CPU is currently working on, or that secondary storage makes the computer run faster.

Example answers and how they were marked

Full marks2/2

Secondary storage stores programs and data that are not currently in use so that they can be loaded into RAM when they are needed.

Why: Role point (1) linked to loading into RAM when needed (1).

Some marks1/2

It stores files and programs that are not currently in use.

Why: Correct role on its own earns one mark (1); no linked development, so the second mark is not awarded.

No marks0/2

It holds the data and instructions the CPU is working on so the computer runs faster.

Why: Describes primary storage/RAM and a speed benefit, which the mark scheme does not accept; no role of secondary storage is given.

2Describe2 marksStored Program Computers Swap Remove

A computer is based on the von Neumann stored program concept.

Describe how the CPU uses main memory (RAM) during the fetch-decode-execute cycle.

[2 marks]

Mark scheme

Award up to two marks for a linked description such as:

The program's instructions (and the data it uses) are held in main memory/RAM (1) so the CPU fetches both the instructions and the data from that one memory (1)
The CPU fetches the next instruction from main memory/RAM (1) using the address of the memory location that holds it (1)
The CPU reads/fetches data from main memory/RAM (1) when an instruction needs it and writes the result back to main memory/RAM (1)
The program's instructions are held in main memory/RAM while the program runs (1) and the CPU fetches them one at a time/one after another to be decoded and executed (1)

Allow 'memory' for main memory/RAM.

Allow 'gets' for fetches/reads.

For both marks, the development must say what the CPU does with the contents of main memory (fetches/reads/writes), not just that main memory is used.

Do not accept answers about the program being stored in secondary storage, such as on a hard drive, or about it being loaded from there.

Do not accept benefits such as the computer running faster or being easier for the user.

Do not accept naming CPU components (control unit, arithmetic logic unit, registers) or buses on their own, without saying what is stored or fetched.

Do not accept 'the computer stores data' on its own, without a link to the instructions of a program.

Example answers and how they were marked

Full marks2/2

The program's instructions and the data it uses are both held in the same main memory (RAM), so the CPU can fetch the instructions and the data it needs from that one memory.

Why: Linked point (1) that instructions and data are stored together in main memory, with the development (1) that the CPU fetches both from the same memory.

Some marks1/2

The CPU fetches the instructions from main memory so that they are processed more quickly.

Why: The first point earns (1) for the CPU fetching instructions from main memory. The second statement is a benefit (speed), which the 'Do not accept benefits' line rules out, so it earns nothing.

No marks0/2

The control unit decodes each instruction and the ALU carries out the calculations.

Why: Both statements name CPU components without saying what is stored, fetched or written, which the mark scheme tells examiners not to accept, so neither earns a mark.

3Discuss6 marksPrimary Memory Swap Remove

A video production company edits films for its clients. The editors use computers to work on 4K video, and they say the computers have become slow. One editor wants to replace the CPU, but a colleague thinks adding more RAM would be better.

Discuss whether adding more RAM will improve the performance of the computers used to edit 4K video. (6)

Your answer should include:

how RAM is used when editing video
why too little RAM causes poor performance
why adding more RAM may not always improve performance.

[6 marks]

Mark scheme

Indicative content

How RAM is used when editing video

The editing software and the video project being worked on are loaded into RAM so that the CPU can access them quickly.
RAM holds the frames, effects and timeline data that the CPU is processing as part of the fetch-decode-execute cycle.
The CPU fetches the instructions and the video data it needs from RAM, which is much faster than fetching them from secondary storage.
Having more RAM means that more of the 4K video project and its effects can be held in memory at the same time.
RAM is also used by the operating system and any other open software, so not all of the RAM is available to the editing software.

Why too little RAM causes poor performance

If there is not enough RAM, the operating system uses virtual memory on secondary storage for data that will not fit in RAM.
Virtual memory is much slower than RAM, so the editor waits longer for 4K video to load and for effects to be applied.
Data has to be swapped between RAM and virtual memory, which is extra work that slows the computer down.
The editing software may freeze or close if it runs out of memory while working on the 4K video.
Playback of the 4K video is not smooth because the frames cannot all be held in RAM ready for the CPU.

Why adding more RAM may not always improve performance

If the computer already has enough RAM for the editing software, the extra RAM will not be used and performance will hardly change.
The clock speed and the number of cores of the CPU decide how quickly instructions are processed, so a slow CPU will still limit how quickly the video is edited.
A slow secondary storage drive will still limit how quickly the 4K video files can be loaded into RAM.
Adding RAM only improves performance if a shortage of RAM was the reason for the computer being slow.

Levels

Level 0 (0 marks): No rewardable content.
Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

Level 3 responses must explain how RAM is used when editing video and give a developed reason why adding more RAM may not always improve performance; responses that only explain how RAM is used, or only why too little RAM causes poor performance, are limited to Level 2.
Accept 'paging' or 'swap file' as equivalent to virtual memory, but do not accept 'cache' or 'ROM'; do not credit statements that adding RAM increases the CPU clock speed or makes the CPU faster, or that 'RAM is volatile' explains poor performance, as these are not linked to the question asked.

Example answers and how they were marked

Full marks6/6

RAM holds the editing software and the 4K video project that is being worked on, so the CPU can fetch the frames and the effects it needs much faster than from the hard drive. If there is not enough RAM, the operating system has to use virtual memory on secondary storage instead, and this is much slower than RAM, so the editors have to wait for video to load and the playback is not smooth. Adding more RAM can help because more of the 4K project and its effects can be held in memory at once. However, it will not always improve performance. If the computer already has enough RAM the extra memory will not be used, and if the CPU has a low clock speed or too few cores it will still take longer to process each frame. A slow hard drive will also limit how quickly the 4K files can be loaded into RAM, so adding RAM only solves the problem if the computer was short of memory.

Why: Level 3: explains how RAM is used when editing video and applies it to the frames and effects (AO1/AO2), gives a developed reason for poor performance using virtual memory and its slowness, and gives developed reasons why extra RAM may not help, namely a CPU bottleneck (clock speed and cores) and a slow drive, applied to the company's 4K editing.

Some marks2/6

RAM is used to store the video while it is being edited. If you don't have enough RAM, the computer will be slow because it has to use the hard drive instead. Adding more RAM will make the computer faster because it can store more video. The CPU also matters because it does the processing.

Why: Level 1, top end (2 marks). A basic relevant use of RAM, storing the video being edited, and a basic point that the hard drive is used when RAM is short; the extra RAM point is asserted with no reasoning and the single CPU statement is not linked to why adding RAM may not help, so there is little development and the answer does not reach Level 2.

No marks0/6

RAM is the same as the CPU, so adding more RAM makes the CPU faster. The video editor should add more RAM to increase the clock speed. 4K video is slow because RAM is volatile.

Why: No creditworthy content: treating RAM as the CPU and saying adding RAM increases the clock speed are the misconceptions named in the guidance, and 'RAM is volatile' is not linked to performance, so it earns nothing.

4Discuss6 marksFetch Decode Execute Cycle Swap Remove

A small robotics company is designing a new robot. The robot's computer uses von Neumann architecture. The engineers are explaining how programs are stored and run.

Discuss how the von Neumann stored program concept and main memory (RAM) are used during the fetch-decode-execute cycle.

Your answer should include:

what is meant by the stored program concept
the role of RAM in the cycle
why the stored program concept is useful.

[6 marks]

Mark scheme

Indicative content

Stored program concept

Instructions and data are stored together in the same main memory (RAM).
Instructions are fetched one at a time from memory and executed in sequence.
The program can be changed by loading different instructions into RAM.
The CPU can only execute instructions that are in main memory.

Role of RAM

RAM holds the program instructions and the data being used.
The address of the next instruction is held in the program counter (PC).
The instruction is fetched from RAM using the address bus.
The data bus carries the instruction from RAM to the CPU.
RAM is volatile, so programs are lost when power is off.
RAM is directly accessible by the CPU, unlike secondary storage.

Benefits

The same hardware can run many different programs.
Programs can be loaded and changed quickly.
No need to rewire the computer for a new task.
Makes general-purpose computers possible.

Levels

Level 0 (0 marks): No rewardable content.
Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Example answers and how they were marked

Full marks6/6

The von Neumann stored program concept means that both the program instructions and the data are stored together in the same main memory, RAM. During the fetch-decode-execute cycle, the CPU fetches an instruction from RAM, decodes it in the control unit, and then executes it. The program counter holds the address of the next instruction, and this address is sent along the address bus to RAM. RAM then returns the instruction along the data bus to the CPU. RAM is volatile, so it only holds the program while the robot is powered on. The stored program concept is useful because the robot's computer can run different programs without changing any hardware; new instructions can simply be loaded into RAM. This makes the computer general-purpose and flexible.

Why: Comprehensive understanding: defines stored program concept, explains RAM role with PC, address bus and data bus, applies to robot, and gives benefits. Sustained lines of reasoning. Level 3.

Some marks3/6

The stored program concept is when instructions and data are stored in RAM. The CPU fetches instructions from RAM. The program counter keeps the address of the next instruction. RAM holds the program. The benefit is that you can change the program without rewiring the computer.

Why: Adequate understanding: correct basic points about stored program concept and RAM, with some linkage, but little development or application to the robot's fetch-decode-execute cycle. Level 2.

Some marks1/6

The von Neumann stored program concept is that the CPU uses RAM to store the program. The fetch-decode-execute cycle fetches, decodes and executes. RAM is random access memory. The benefit is that it is fast.

Why: Basic independent points only; no real linkage or application to the robot. Level 1.

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a paper

Practice paper

Questions by topic

2.1 Binary

2.2 Data representation

2.3 Data storage and compression

3.1 Hardware

3.2 Software

3.3 Programming languages

4.1 Networks

4.2 Network security

5.1 Environmental

5.2 Ethical and legal

5.3 Cybersecurity

More ways to revise Edexcel GCSE Computer Science (1CP2)