Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Describe2 marksSecondary Memory Swap Remove

Computers use secondary storage.

Describe the role of secondary storage.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Stores programs (including the operating system) and data that are not currently in use (1) so that they can be loaded into RAM/main memory when needed (1)
  • Keeps files/programs/data when the power is turned off (1) which happens because it is non-volatile (1)
  • Stores files/data for backup or archiving (1) so that they can be recovered if the originals are lost/corrupted (1)

A correct role on its own earns one mark; the second mark requires a linked development.

Accept either order if both the role and the link are given.

Do not accept 'it is non-volatile' on its own, unless it is linked to keeping data when the power is turned off.

Do not accept answers that only name a storage type (magnetic, optical, solid state) without describing a role.

Do not accept responses that describe primary storage/RAM, e.g. storing the data/instructions the CPU is currently working on, or that secondary storage makes the computer run faster.

Example answers and how they were marked
Full marks2/2

Secondary storage stores programs and data that are not currently in use so that they can be loaded into RAM when they are needed.

Why: Role point (1) linked to loading into RAM when needed (1).

Some marks1/2

It stores files and programs that are not currently in use.

Why: Correct role on its own earns one mark (1); no linked development, so the second mark is not awarded.

No marks0/2

It holds the data and instructions the CPU is working on so the computer runs faster.

Why: Describes primary storage/RAM and a speed benefit, which the mark scheme does not accept; no role of secondary storage is given.

2Describe2 marksSecondary Memory Swap Remove

A laptop uses a solid state drive (SSD) for secondary storage.

Describe how data is stored on a solid state drive.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Data is stored on (flash) memory chips/cells (1) as a pattern of electrical charges (1)
  • A current/voltage forces electrons through a barrier (1) so that they are trapped (or not trapped) to hold/represent a value (1)
  • Cells with a trapped charge and cells with no trapped charge (1) represent 1s and 0s/binary (1)
  • The trapped charge remains when the power is turned off (1) so the data is not lost/it is non-volatile (1)

Do not accept responses that describe magnetic storage, e.g. magnetised platters, spinning disks or read/write heads, or optical storage, e.g. lasers, pits and lands.

Do not award a mark for 'it is solid state' or 'it has no moving parts' without a description of how the data is stored.

Do not award a mark for restating the stem, e.g. 'a laptop uses an SSD' or 'an SSD uses flash memory'.

'Data is stored as electrical charges' on its own, with no reference to memory chips/cells or to how the charge is held, earns a maximum of one mark (1).

A response that only describes electrons being trapped, with no link to how the value/data is represented, earns one mark (1). The second mark needs a link such as trapped and not trapped charge representing 1s and 0s, or the trapped charge being kept so the data is not lost.

Example answers and how they were marked
Full marks2/2

A current is used to force electrons through a barrier so that they become trapped, and a cell with a trapped charge or a cell with no trapped charge represents a 1 or a 0.

Why: Linked description: a current forces electrons through a barrier (1) and trapped/not trapped charge represents 1s and 0s (1).

Some marks1/2

The data is stored in flash memory chips.

Why: Gives the creditworthy point that data is stored on flash memory chips (1) but does not develop it, e.g. by saying the data is held as electrical charges or by describing trapped electrons.

No marks0/2

The data is stored as magnetised areas on a spinning platter.

Why: This describes magnetic storage, which the mark scheme says not to accept for a solid state drive.

3Explain2 marksSecondary Memory Swap Remove

A hard disk drive stores data on a spinning magnetic platter.

Explain how data is read from a magnetic hard disk.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The read/write head moves over the surface of the platter (1) and detects whether each area of the disk is magnetised (1)
  • The platter spins/rotates (1) so the read/write head can pass over the whole surface/tracks of the disk (1)
  • The pattern of magnetised and non-magnetised areas detected by the read/write head (1) is read as binary 1s and 0s (1)
  • The drive head detects the direction of magnetisation of each area (1) so the data can be read as binary (1)

For both marks, the expansion must follow/associate with the statement.

Allow one mark for stating that data is read magnetically / that the read/write head detects the magnetisation of the disk without a linked reason.

Do not accept answers that describe how data is written to the disk, such as the head magnetising the platter, rather than how it is read.

Do not accept 'a laser reads the pits and lands' - this describes optical storage, not magnetic storage.

Example answers and how they were marked
Full marks2/2

The platter rotates so the read/write head passes over the whole surface of the disk and it detects whether each area is magnetised or not. The pattern of magnetised areas is then read as 1s and 0s.

Why: Linked point (1) rotation of the platter with reason (1) the head reaches the whole surface, and the second line about magnetised areas is also present.

Some marks1/2

The read/write head detects the magnetic charges on the disk.

Why: Allow line (1): states the head detects the magnetisation of the disk, but gives no linked reason (e.g. the platter rotating so the head covers the whole surface), so only one mark.

No marks0/2

A laser shines onto the disk and reads the pits and lands, then the data is sent to the CPU.

Why: Describes optical storage. Do not accept 'a laser reads the pits and lands' - a magnetic disk is read by a head detecting magnetisation.

4Discuss6 marksPrimary Memory Swap Remove

A school is buying new computers for its IT room. The computers the technician has ordered have 16 GB of RAM and a large hard drive.

Discuss why main memory (RAM) is needed for programs to run on these computers.

Your answer should include:

  • the role of RAM in the stored program concept
  • what happens to a program when it is opened
  • why the CPU cannot execute a program directly from secondary storage.
[6 marks]
Mark scheme

Indicative content

the role of RAM in the stored program concept

  • In the von Neumann stored program concept, a program's instructions and the data it uses are held together in main memory.
  • RAM holds the instructions and data of the program that the CPU is currently processing.
  • The CPU fetches each instruction from RAM during the fetch-decode-execute cycle, so a program must be in RAM before it can be run.
  • RAM is directly accessible by the CPU, so instructions can be fetched quickly enough for the CPU to keep working.

what happens to a program when it is opened

  • When a program is opened, a copy of its instructions and data is transferred from secondary storage, such as the hard drive, into RAM.
  • The operating system loads the program into RAM so that the CPU can start fetching and executing its instructions.
  • When the program is closed, it is removed from RAM, and the space it used is free for another program.
  • If a computer does not have enough RAM, the program may not open, or another open program has to be closed first.

why the CPU cannot execute a program directly from secondary storage

  • Secondary storage, such as a hard disk drive, is much slower to access than RAM.
  • The CPU can process instructions much faster than secondary storage can supply them, so the CPU would have to wait and would not be working at full speed.
  • RAM is fast electronic memory with no moving parts, so data can be read from it in a fraction of the time taken by a magnetic hard disk drive.
  • Running the school's programs directly from secondary storage would make the computers in the IT room very slow to use.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover both the role of RAM in the stored program concept and the speed difference between RAM and secondary storage, with a reason such as the CPU having to wait for instructions.
  • Answers that make only basic, independent points, such as what RAM is, that a program is copied into RAM when it is opened, or that RAM is faster than a hard drive, without linking them to explain why the CPU would have to wait for instructions, are limited to Level 1.
  • Do not accept statements that RAM is permanent storage, that RAM replaces secondary storage, or that secondary storage is read-only.
Example answers and how they were marked
Full marks6/6

The computers need RAM because of the von Neumann stored program concept, in which the instructions of a program and the data it uses are both held in main memory. When a student opens a program on one of the new computers, the operating system copies it from the hard drive into RAM. The CPU then fetches each instruction from RAM in the fetch-decode-execute cycle, so the program must be in RAM before it can be run. The CPU cannot execute a program directly from secondary storage because a hard disk drive is much slower than RAM. It has moving parts and a much lower transfer rate, so the CPU would often have nothing to do while it waited for the next instruction. RAM is fast electronic memory that the CPU can read directly, which is why 16 GB of RAM lets the school run several programs at once and still keep the CPU working at full speed.

Why: Comprehensive understanding: the stored program concept is explained (instructions and data held in main memory), the program being opened is linked to it, and the speed difference is developed with the reason that the CPU would wait for instructions, all applied to the school's computers. Level 3.

Some marks2/6

RAM is the main memory of the computer. It stores the programs and data that are being used at the moment. When you open a program it is copied into RAM, and the CPU fetches instructions from RAM. RAM is faster than the hard drive, so a program runs better from RAM. Having 16 GB means the school can have more programs open at once.

Why: Basic, independent points only: what RAM is, that a program is copied into RAM when it is opened, that the CPU fetches instructions from RAM, and that RAM is faster than a hard drive. None is linked to the stored program concept or developed to explain why the CPU would have to wait for instructions, so Level 1, 2 marks.

No marks0/6

RAM is the permanent storage inside the computer, like a hard drive. The school needs 16 GB of RAM so that all the students' files can be saved permanently. When a program is opened, it is copied from RAM to the CPU. The CPU cannot execute from secondary storage because secondary storage is read-only.

Why: No creditworthy points. RAM is described as permanent storage, files are said to be saved permanently in RAM, a program is said to be copied from RAM to the CPU, and secondary storage is said to be read-only. All are the misconceptions listed in the Do not accept guidance, so Level 0.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.