Edexcel GCSE Computer Science (1CP2) Exam Questions

Award up to two marks for a linked description such as:

• Stores programs (including the operating system) and data that are not currently in use (1) so that they can be loaded into RAM/main memory when needed (1)
• Keeps files/programs/data when the power is turned off (1) which happens because it is non-volatile (1)
• Stores files/data for backup or archiving (1) so that they can be recovered if the originals are lost/corrupted (1)

A correct role on its own earns one mark; the second mark requires a linked development.

Accept either order if both the role and the link are given.

Do not accept 'it is non-volatile' on its own, unless it is linked to keeping data when the power is turned off.

Do not accept answers that only name a storage type (magnetic, optical, solid state) without describing a role.

Do not accept responses that describe primary storage/RAM, e.g. storing the data/instructions the CPU is currently working on, or that secondary storage makes the computer run faster.

Award up to two marks for a linked description such as:

• A read/write head moves over the surface of the disk (1) to read/write data by detecting or changing the magnetic alignment of areas of the surface (1)
• The head magnetises areas of the disk surface in different directions (1) so each area represents a binary 1 or 0 (1)
• Data is stored on concentric circles called tracks (1) which are divided into sectors (1)

Allow one mark for tracks/concentric circles on their own.

For the second mark in the first two bullets, the response must refer to the magnetic alignment/charge being detected or changed, not just that the head reads/writes data.

Do not award a mark for 'it is magnetic' or 'it stores data in binary' with no description of how the data is stored.

Do not accept descriptions of optical storage (e.g. a laser, pits and lands) or solid state storage (e.g. electric charges in chips).

Indicative content

Magnetic storage

• A magnetic hard disk drive stores data on a magnetic platter that spins, with a read/write head on an actuator arm that moves over its surface.
• The read/write head magnetises small areas of the platter to represent binary 1s and 0s, and reads the magnetic pattern back when the data is needed.
• The data is held on concentric tracks that are divided into sectors. (Accept data being stored magnetically without further detail, but a vague 'it uses a magnet' is not enough for this point.)
• The platter and the read/write head are sealed inside the drive unit because of the precision needed.

Solid state storage

• A solid state drive stores data in flash memory chips and has no moving parts.
• A large electric current forces electrons through a barrier and traps them in a floating gate; the presence or absence of this trapped charge represents a 1 or a 0. (Accept either convention for which charge state represents a 1 and which represents a 0.)
• The charged cells are detected to read the data back. (Accept: the data can be erased and rewritten by applying a new current.)
• As there is no disk to spin to the correct position and no arm to move, data can be read from and written to solid state storage very quickly.

Suitability for the company's video files

• A magnetic HDD has a very large capacity and is generally cheaper per gigabyte than an SSD of the same capacity, which suits a company that stores many large video files.
• An SSD has very fast read/write speeds, so the company's large video files open and save quickly while they are being edited.
• An SSD has no moving parts, so it is more durable if the company's computers are carried between filming locations.
• A magnetic HDD could store finished videos as an archive and an SSD could hold the project being edited, so the company gets high speed while editing and low-cost capacity for storage.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 answers must give accurate accounts of how data is stored on both magnetic and solid state storage and sustain a line of reasoning that applies at least one of them to the company's video files. An answer that covers only one storage type, or that describes both types without any application to the company, cannot go above Level 2.
• Do not accept descriptions of optical storage (pits and lands, a laser) as magnetic or solid state storage, and do not accept 'magnetic storage uses a laser' or 'solid state storage is volatile' or 'solid state storage is RAM'.

Indicative content

Stored program concept

• Instructions and data are stored together in the same main memory (RAM).
• Instructions are fetched one at a time from memory and executed in sequence.
• The program can be changed by loading different instructions into RAM.
• The CPU can only execute instructions that are in main memory.

Role of RAM

• RAM holds the program instructions and the data being used.
• The address of the next instruction is held in the program counter (PC).
• The instruction is fetched from RAM using the address bus.
• The data bus carries the instruction from RAM to the CPU.
• RAM is volatile, so programs are lost when power is off.
• RAM is directly accessible by the CPU, unlike secondary storage.

Benefits

• The same hardware can run many different programs.
• Programs can be loaded and changed quickly.
• No need to rewire the computer for a new task.
• Makes general-purpose computers possible.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)