Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 12 marks

Pick again
Print
1Describe2 marksSecondary Memory Swap Remove

Computers use secondary storage.

Describe the role of secondary storage.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Stores programs (including the operating system) and data that are not currently in use (1) so that they can be loaded into RAM/main memory when needed (1)
  • Keeps files/programs/data when the power is turned off (1) which happens because it is non-volatile (1)
  • Stores files/data for backup or archiving (1) so that they can be recovered if the originals are lost/corrupted (1)

A correct role on its own earns one mark; the second mark requires a linked development.

Accept either order if both the role and the link are given.

Do not accept 'it is non-volatile' on its own, unless it is linked to keeping data when the power is turned off.

Do not accept answers that only name a storage type (magnetic, optical, solid state) without describing a role.

Do not accept responses that describe primary storage/RAM, e.g. storing the data/instructions the CPU is currently working on, or that secondary storage makes the computer run faster.

Example answers and how they were marked
Full marks2/2

Secondary storage stores programs and data that are not currently in use so that they can be loaded into RAM when they are needed.

Why: Role point (1) linked to loading into RAM when needed (1).

Some marks1/2

It stores files and programs that are not currently in use.

Why: Correct role on its own earns one mark (1); no linked development, so the second mark is not awarded.

No marks0/2

It holds the data and instructions the CPU is working on so the computer runs faster.

Why: Describes primary storage/RAM and a speed benefit, which the mark scheme does not accept; no role of secondary storage is given.

2Describe2 marksEmbedded Systems Swap Remove

A drone is controlled by an embedded system.

Describe the purpose of the embedded system in the drone.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • It controls the motors/rotors (1) so that the drone can take off, hover, turn and land (1)
  • It keeps the drone stable/level automatically (1) by taking readings from a sensor (accelerometer/gyroscope/GPS) (1)
  • It receives signals from the remote control (1) and changes the speed of the motors to steer the drone (1)
  • It monitors the battery level (1) and brings the drone back to the ground before the battery runs out (1)

The development must relate to the function given in the point.

Accept a named function that the embedded system controls, e.g. 'it keeps the drone level', as the first mark (1).

Award the second mark only when the development gives a specific outcome or detail of that function, e.g. 'so that the drone can take off, hover, turn and land' or 'by changing the motor speeds to keep it level'.

Do not award the second mark for a generic outcome such as 'so it works', 'so it can fly' or 'so the drone moves'.

A bare 'it controls the motors so it can fly' therefore earns the first mark only.

Allow any other specific function of a drone that is carried out by the embedded system.

Do not accept 'it flies the drone' / 'it is the drone's brain' / 'it makes the drone work' without a named function being controlled.

Do not accept answers that describe the user or the remote control flying the drone with no function carried out by the embedded system.

Example answers and how they were marked
Full marks2/2

It keeps the drone level while it is in the air by reading the accelerometer and changing the speed of the motors.

Why: Named function of the embedded system, keeping the drone level (1), developed with the sensor reading and motor speed changes that achieve it (1).

Some marks1/2

It controls the motors of the drone.

Why: First mark only (1) for naming a function the embedded system controls, with no linked outcome or detail to earn the second mark.

No marks0/2

It is the brain of the drone and makes the drone work.

Why: Vague phrase with no named function being controlled, which the mark scheme's 'Do not accept' line rules out.

3Explain2 marksSecondary Memory Swap Remove

A hard disk drive stores data on a spinning magnetic platter.

Explain how data is read from a magnetic hard disk.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The read/write head moves over the surface of the platter (1) and detects whether each area of the disk is magnetised (1)
  • The platter spins/rotates (1) so the read/write head can pass over the whole surface/tracks of the disk (1)
  • The pattern of magnetised and non-magnetised areas detected by the read/write head (1) is read as binary 1s and 0s (1)
  • The drive head detects the direction of magnetisation of each area (1) so the data can be read as binary (1)

For both marks, the expansion must follow/associate with the statement.

Allow one mark for stating that data is read magnetically / that the read/write head detects the magnetisation of the disk without a linked reason.

Do not accept answers that describe how data is written to the disk, such as the head magnetising the platter, rather than how it is read.

Do not accept 'a laser reads the pits and lands' - this describes optical storage, not magnetic storage.

Example answers and how they were marked
Full marks2/2

The platter rotates so the read/write head passes over the whole surface of the disk and it detects whether each area is magnetised or not. The pattern of magnetised areas is then read as 1s and 0s.

Why: Linked point (1) rotation of the platter with reason (1) the head reaches the whole surface, and the second line about magnetised areas is also present.

Some marks1/2

The read/write head detects the magnetic charges on the disk.

Why: Allow line (1): states the head detects the magnetisation of the disk, but gives no linked reason (e.g. the platter rotating so the head covers the whole surface), so only one mark.

No marks0/2

A laser shines onto the disk and reads the pits and lands, then the data is sent to the CPU.

Why: Describes optical storage. Do not accept 'a laser reads the pits and lands' - a magnetic disk is read by a head detecting magnetisation.

4Discuss6 marksFetch Decode Execute Cycle Swap Remove

A small robotics company is designing a new robot. The robot's computer uses von Neumann architecture. The engineers are explaining how programs are stored and run.

Discuss how the von Neumann stored program concept and main memory (RAM) are used during the fetch-decode-execute cycle.

Your answer should include:

  • what is meant by the stored program concept
  • the role of RAM in the cycle
  • why the stored program concept is useful.
[6 marks]
Mark scheme

Indicative content

Stored program concept

  • Instructions and data are stored together in the same main memory (RAM).
  • Instructions are fetched one at a time from memory and executed in sequence.
  • The program can be changed by loading different instructions into RAM.
  • The CPU can only execute instructions that are in main memory.

Role of RAM

  • RAM holds the program instructions and the data being used.
  • The address of the next instruction is held in the program counter (PC).
  • The instruction is fetched from RAM using the address bus.
  • The data bus carries the instruction from RAM to the CPU.
  • RAM is volatile, so programs are lost when power is off.
  • RAM is directly accessible by the CPU, unlike secondary storage.

Benefits

  • The same hardware can run many different programs.
  • Programs can be loaded and changed quickly.
  • No need to rewire the computer for a new task.
  • Makes general-purpose computers possible.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)
Example answers and how they were marked
Full marks6/6

The von Neumann stored program concept means that both the program instructions and the data are stored together in the same main memory, RAM. During the fetch-decode-execute cycle, the CPU fetches an instruction from RAM, decodes it in the control unit, and then executes it. The program counter holds the address of the next instruction, and this address is sent along the address bus to RAM. RAM then returns the instruction along the data bus to the CPU. RAM is volatile, so it only holds the program while the robot is powered on. The stored program concept is useful because the robot's computer can run different programs without changing any hardware; new instructions can simply be loaded into RAM. This makes the computer general-purpose and flexible.

Why: Comprehensive understanding: defines stored program concept, explains RAM role with PC, address bus and data bus, applies to robot, and gives benefits. Sustained lines of reasoning. Level 3.

Some marks3/6

The stored program concept is when instructions and data are stored in RAM. The CPU fetches instructions from RAM. The program counter keeps the address of the next instruction. RAM holds the program. The benefit is that you can change the program without rewiring the computer.

Why: Adequate understanding: correct basic points about stored program concept and RAM, with some linkage, but little development or application to the robot's fetch-decode-execute cycle. Level 2.

Some marks1/6

The von Neumann stored program concept is that the CPU uses RAM to store the program. The fetch-decode-execute cycle fetches, decodes and executes. RAM is random access memory. The benefit is that it is fast.

Why: Basic independent points only; no real linkage or application to the robot. Level 1.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.