Edexcel GCSE Computer Science (1CP2) Exam Questions

• C SMTP (1)
• The only correct answer is C. The correct answer is SMTP.
• A is not correct because FTP is used to upload and download files
• B is not correct because HTTP is used to request web pages
• D is not correct because TCP is a transport-layer protocol that splits data into packets and reassembles them

Award up to two marks for a linked description such as:

• (Ethernet) cables are not affected by interference from other devices (1) so data is transferred at a consistent/steady speed (1)
• Each device has its own cable to the switch (1) so the full bandwidth is available to that device and speeds do not drop as more users join (1)
• Fibre optic cable has a higher bandwidth than a wireless link (1) so more data can be sent along the cable each second (1)
• The cable gives a direct/physical path to the switch (1) so data is less likely to be lost and resent, which would slow the transfer (1)

Do not accept responses about security, reliability or users being unable to move around, as these are not about speed.

Do not accept answers that only say a wired/cable connection is faster, or that fibre is faster, without saying why.

Award up to two marks for a linked explanation such as:

• The router reads the destination IP address (1) so it knows which network/device the packet is for (1)
• The router looks up the destination IP address in its routing table (1) to find the next router/route for the packet (1)
• The router forwards the packet to the next router (1) that leads towards that IP address / is on the best route (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept MAC address - routers use the IP address to route packets between networks.

Do not accept 'it finds the exact device' without saying how the router uses the address, e.g. routing table/next router.

Award up to two marks for a linked explanation such as:

• Splits the data/file into packets (1) so each packet can be sent separately across the network (1)
• Adds a packet/sequence number to each packet (1) so the packets can be put back into the correct order at the destination (1)
• Detects lost/missing packets (1) so they can be requested/resent (1)
• Creates a connection between the two computers/hosts (1) before the file is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'segments' for 'packets' (TCP divides the data into segments, which become packets at the internet layer).

Do not accept 'sends the data/file' on its own without saying what the transport layer does to the data.

Do not accept naming TCP or a port number on its own without expansion.

Do not accept routing/addressing packets using IP addresses, which is the internet layer.

Award up to two marks for a linked explanation such as:

• Wireless signals can be blocked or absorbed by walls (1) so the data must be re-sent, which adds delay (1)
• A device further from the access point has a weaker signal (1) so data must be re-sent/transmitted at a lower rate, adding delay (1)
• Devices on a wireless network share a channel (1) so a device must wait its turn to transmit, which adds delay (1)
• Interference from other devices affects the radio signal (1) so data must be re-sent, adding delay (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'waiting to send' or 'collisions' as the delay caused by devices sharing a channel.

Do not accept 'wireless is slower than wired' on its own, as this repeats the question.

Do not accept a reason that only affects download speed/bandwidth (e.g. 'files take longer to download') without a link to delay.