Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

3 questions · 6 marks

Pick again
Print
1Explain2 marksPacket Switching Swap Remove

A file is sent across the internet in packets.

Explain why packets from the same file may take different routes.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Each router chooses the best route at the time (1) so when a route becomes busy/congested or fails, later packets are forwarded along a different path (1)
  • Routers forward each packet separately (1) so the path a packet takes depends on the traffic conditions when that packet arrives (1)
  • A router may send a packet to a different next router (1) if its routing table shows a better/less congested route for that packet (1)
  • Traffic on the internet changes (1) so no single path is kept for the file and each packet can use whichever route is best when it is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow reference to a routing table, or to how a router decides the route, as part of the linked reason.

Do not accept 'the packets have different IP addresses' because all packets from the same file have the same destination IP address, even though their routes can differ.

Do not accept 'the internet is busy' or 'there is a lot of traffic' on its own without linking this to the router choosing a different route.

Do not accept 'different routers send the packets' on its own without a reason why a different router/route is chosen.

Do not accept an answer that only says the packets take different routes without explaining why.

Example answers and how they were marked
Full marks2/2

Each router chooses the best route at the time, so if one route becomes busy or fails, later packets are sent a different way.

Why: Linked point (1) that each router chooses the best route at the time and reason (1) that a busy or failed route means later packets take a different path.

Some marks1/2

Routers send packets along the least congested route.

Why: States that a router chooses the least congested route (1) but gives no linked reason why this makes the packets from the file take different routes.

No marks0/2

Because each packet is given a different IP address so they go to different places.

Why: Misconception named in the mark scheme: all packets from the same file share the same destination IP address, even though their routes can differ.

2Explain2 marksWired Connections Swap Remove

A school connects its computers to the network using copper Ethernet cables.

A computer in a new classroom is 150 metres from the network switch. It is connected using a copper Ethernet cable, but the connection is unreliable.

Explain why the connection is unreliable.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • A copper Ethernet cable has a standard maximum segment length of 100 metres (1) so over 150 metres the signal is too weak to be read correctly (1)
  • 150 metres is beyond the maximum range of a copper Ethernet cable (1) so the computer does not receive the data with enough signal strength (1)
  • The signal weakens/degrades as it travels along the cable (1) so at 150 metres the data is corrupted/lost (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'the cable is too long' on its own without saying that the signal weakens/does not reach the computer with enough strength.

Do not accept 'the signal is lost/weak' on its own without linking it to the distance being beyond the maximum range of copper cable.

Do not accept answers that only blame interference from walls or other devices, as the problem here is the distance.

Example answers and how they were marked
Full marks2/2

A copper Ethernet cable has a standard maximum segment length of 100 metres. The classroom is 150 metres away, so the signal has become too weak to be read correctly, which makes the connection unreliable.

Why: States the cable is beyond its maximum range (1) and links this to the signal being too weak to be read (1).

Some marks1/2

Copper Ethernet cables can only carry data for 100 metres, which is less than 150 metres.

Why: Identifies that the cable run is beyond the maximum range (1) but does not say what happens to the signal as a result.

No marks0/2

There is interference from the walls of the classroom, which slows the signal down.

Why: Blames interference rather than distance, so there is no creditworthy point about range; the mark scheme does not accept interference as the explanation here.

3Explain2 marksWireless Connections Swap Remove

A student plays an online game using a laptop connected to the school Wi-Fi.

Explain one reason why an online game can respond more slowly over a wireless connection than over a wired connection.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Wireless signals can be blocked or absorbed by walls (1) so the data must be re-sent, which adds delay (1)
  • A device further from the access point has a weaker signal (1) so data must be re-sent/transmitted at a lower rate, adding delay (1)
  • Devices on a wireless network share a channel (1) so a device must wait its turn to transmit, which adds delay (1)
  • Interference from other devices affects the radio signal (1) so data must be re-sent, adding delay (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'waiting to send' or 'collisions' as the delay caused by devices sharing a channel.

Do not accept 'wireless is slower than wired' on its own, as this repeats the question.

Do not accept a reason that only affects download speed/bandwidth (e.g. 'files take longer to download') without a link to delay.

Example answers and how they were marked
Full marks2/2

Interference from other devices affects the radio signal, so the data has to be re-sent and this adds delay before the player's action appears.

Why: Linked point (1): interference affects the signal; reason (1): re-sending the data adds delay (latency).

Some marks1/2

Walls can block the wireless signal.

Why: Point only (1): walls block the signal. No linked reason saying that this means data must be re-sent, which adds delay.

No marks0/2

Wireless has less bandwidth than wired, so a game update takes longer to download.

Why: Confuses latency with bandwidth/download speed; the mark scheme says not to accept this without a link to delay.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.