Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

3 questions · 6 marks

Pick again
Print
1Explain2 marksPacket Switching Swap Remove

A router connects a home network to the internet.

Explain how a router uses the destination IP address in a packet header.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The router reads the destination IP address (1) so it knows which network/device the packet is for (1)
  • The router looks up the destination IP address in its routing table (1) to find the next router/route for the packet (1)
  • The router forwards the packet to the next router (1) that leads towards that IP address / is on the best route (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept MAC address - routers use the IP address to route packets between networks.

Do not accept 'it finds the exact device' without saying how the router uses the address, e.g. routing table/next router.

Example answers and how they were marked
Full marks2/2

The router looks up the destination IP address in its routing table to find the next router to send the packet to.

Why: Linked point (1) and reason (1): looks up the destination IP address in the routing table to find the next router.

Some marks1/2

It reads the destination IP address.

Why: Reads the destination IP address (1) but gives no linked reason about a routing table or next router.

No marks0/2

It reads the MAC address so it knows which computer sent the packet.

Why: Routers use the IP address to route packets, not the MAC address; no creditworthy point.

2Explain2 marksTopologies Swap Remove

A small office uses a star topology with a central switch.

Explain one benefit of using a star topology in the office.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • If one cable/device fails, the other devices on the network are not affected (1) because each device has its own separate connection to the central switch (1)
  • Faults are easier to find (1) because each device has its own cable, so the faulty cable can be checked on its own (1)
  • Data is sent only to the intended device (1) because the central switch forwards the data only to the device it is addressed to (1)
  • Data transfer is fast (1) because each device has its own cable, so devices do not share the cable with each other (1)
  • New devices can be added easily (1) because a device only needs one cable to a spare port on the central switch (1)

For both marks, the expansion must follow/associate with the statement.

A benefit stated on its own can earn one mark; the second mark is only for a linked reason.

Accept 'switch' for the central device.

Do not accept 'server' or 'hub' for the central device.

Do not accept 'hub', as a hub sends data to all devices, not only to the intended device.

Do not award a mark for responses that say only that the network is better/more reliable/easier without naming a benefit.

Example answers and how they were marked
Full marks2/2

If one of the cables breaks, the other devices can still communicate because each device has its own separate cable connected to the central switch.

Why: Linked benefit (1) and reason (1): a single cable failure does not affect the other devices because each device has a separate connection to the switch.

Some marks1/2

If one cable breaks, the other devices are not affected.

Why: A benefit is stated on its own (1), but there is no linked reason about each device having its own connection to the central switch, so the second mark is not awarded.

No marks0/2

It is better than a bus topology because every device connects to the central server.

Why: No credit: 'better' does not name a benefit, so no first mark, and 'server' is not accepted as the central device, so there is no linked reason either.

3Explain2 marksWireless Connections Swap Remove

A library has one wireless access point fixed at one end of the building.

Explain one effect of the range of the wireless access point on the performance of the wireless network.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Devices near the edge/limit of the range receive a weaker signal/lower signal strength (1) so data is transferred more slowly/the connection speed/bandwidth is lower (1)
  • Devices near the edge/limit of the range receive a weaker signal/lower signal strength (1) so latency increases (1)
  • Devices outside the range cannot connect to the access point (1) so users in that area cannot use the network/access its resources (1)
  • A device that moves out of range loses its connection (1) so the user's work is interrupted until it is back in range (1)

For both marks, the expansion must follow/associate with the statement.

For the second mark, the reason must state the effect on the user/network (e.g. cannot use the network/access resources, slower speed, higher latency), not just repeat that the device is out of range.

Do not accept a definition of range on its own (e.g. 'range is how far the signal reaches') without an effect on performance.

Do not accept 'a larger range means more devices can connect' (range is not about the number of devices/capacity).

Do not accept range confused with bandwidth/speed, e.g. 'range is the maximum amount of data that can be transferred'.

Example answers and how they were marked
Full marks2/2

A device at the edge of the range has a weak signal, so its connection speed is slower.

Why: Linked point (1): weak signal at the edge of the range; reason (1): connection speed is slower.

Some marks1/2

Devices outside the range cannot connect to the network.

Why: Point only (1): outside the range a device cannot connect. No linked reason about the effect on use/performance.

No marks0/2

Range is the distance that a wireless signal can travel.

Why: A definition of range, not an effect on performance; the mark scheme says not to accept this on its own.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.