Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

6 questions · 11 marks

Pick again
Print
1Multiple choice1 markPacket Switching Swap Remove

Identify what a router does with a data packet it receives.

[1 mark]
  • AGives the packet a number
  • BSends it on to the next router
  • CPuts the packets into order
  • DRebuilds the original file
Mark scheme
  • B Sends it on to the next router (1)
  • The only correct answer is B. The correct answer is sends it on to the next router.
  • A is not correct because a packet is given its number by the sending computer before it is sent
  • C is not correct because packets are put back into order by the receiving computer
  • D is not correct because the original file is rebuilt by the receiving computer once all the packets arrive
Example answers and how they were marked
Full marks1/1

B Sends it on to the next router

Why: Selected the action a router performs on a packet it receives (1).

No marks0/1

D Rebuilds the original file

Why: A near miss: rebuilding the file is a packet switching action, but it is done by the receiving computer, not by a router.

No marks0/1

A Gives the packet a number

Why: Misconception: packets are numbered by the sending computer, so a router does not add a packet number.

2Short recall2 marksWired Connections Swap Remove

A school connects its desktop computers to the network using cables.

Give two reasons why the wired connections give better network performance than the wireless connections.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Faster transmission speed (1)
  • Higher bandwidth (1)
  • Lower latency (1)
  • Not affected by interference (from other devices/walls) (1)
  • No blind spots/not affected by distance from the wireless access point (1)

Do not accept benefits of wireless connections, e.g. users can move around the building with their devices

Do not accept 'easier to set up' or 'does not need a password' as these are not about network performance

Example answers and how they were marked
Full marks2/2

The wired connection is not affected by interference from other devices, and it has a lower latency than Wi-Fi.

Why: Interference point (1) and lower latency point (1).

Some marks1/2

It has a faster transmission speed and the users can move around the building with their computers.

Why: Faster transmission speed (1); moving around is a benefit of wireless, so is not credited.

No marks0/2

It is easier to set up the network and the users do not need a password.

Why: Neither point is about network performance; the mark scheme does not accept 'easier to set up' or password points, so no marks.

3Describe2 marksWired Connections Swap Remove

A farm uses wired connections to link sensors in its fields to a computer in the farmhouse.

Describe how the range of a wired connection can affect the performance of this network.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • (Twisted pair/copper) cable only carries data over a limited distance (about 100 metres) (1) so sensors further away need another switch/device to pass the data on to the farmhouse (1)
  • Fibre optic cable can carry data over much longer distances (1) so wired connections can reach sensors across the whole farm (1)
  • Data sent further than the cable's range is not received (1) so the computer in the farmhouse does not get readings from those sensors (1)
  • A wireless connection can reach sensors that are out of range of the cables (1) so a mix of the two can give readings across the whole site (1)

Allow responses about signal weakening/being lost over a long cable.

Do not accept responses about bandwidth or speed, as range is about distance, not the amount or rate of data.

Example answers and how they were marked
Full marks2/2

Twisted pair copper cable only carries data for about 100 metres (1) so a switch is needed in each field to pass the readings on to the farmhouse (1).

Why: Point that copper cable has a limited distance (1) linked to needing another device to extend the network (1).

Some marks1/2

Fibre optic cable can carry data much further than copper cable.

Why: Gives the first point of a linked pair (1) but does not develop it to say what this allows the farm to do.

No marks0/2

A longer cable gives the network a bigger bandwidth so the sensors work faster.

Why: About bandwidth and speed rather than range, which the mark scheme says is not accepted.

4Explain2 marksPacket Switching Swap Remove

Data is split into packets before it is sent across the internet.

Explain why each packet has a packet number in its header.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The receiver can put the packets back into the correct order (1) because packets may arrive out of order/take different routes (1)
  • The receiver can see if a packet is missing (1) because the sequence of numbers shows a gap (1)
  • The receiver knows when the whole file has arrived (1) because the total number of packets/last packet number is known (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'so the packets can be put back in the correct order/reassembled' for the first mark, but the second mark needs the reason, i.e. packets may arrive out of order/take different routes.

Do not accept 'so the packets can be identified' without stating what the number is used for, e.g. reordering or spotting a missing packet.

Do not accept 'so the router knows where to send it' - the router uses the destination IP address, not the packet number.

Example answers and how they were marked
Full marks2/2

The receiver can put the packets back in the correct order because they may arrive out of order.

Why: Linked point (1) and reason (1): the packet number allows reordering because packets can arrive out of order.

Some marks1/2

It shows the receiver the order of the packets.

Why: The point is given (1) but there is no linked reason, such as packets arriving out of order.

No marks0/2

So the router knows which route to use.

Why: Routers use the destination IP address, not the packet number, so this earns nothing; it is named in the mark scheme as a 'Do not accept'.

5Explain2 marksProtocols & Layers Swap Remove

The TCP/IP model has four layers.

Explain one function of the transport layer when a file is sent over a network.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Splits the data/file into packets (1) so each packet can be sent separately across the network (1)
  • Adds a packet/sequence number to each packet (1) so the packets can be put back into the correct order at the destination (1)
  • Detects lost/missing packets (1) so they can be requested/resent (1)
  • Creates a connection between the two computers/hosts (1) before the file is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'segments' for 'packets' (TCP divides the data into segments, which become packets at the internet layer).

Do not accept 'sends the data/file' on its own without saying what the transport layer does to the data.

Do not accept naming TCP or a port number on its own without expansion.

Do not accept routing/addressing packets using IP addresses, which is the internet layer.

Example answers and how they were marked
Full marks2/2

The transport layer splits the data into packets (1) so each packet can be sent separately across the network (1).

Why: Linked point (1) and reason (1): splitting into packets lets each one be sent separately.

Some marks1/2

It splits the data into packets (1).

Why: Point (1) identified, but no linked reason given, so only the first mark is awarded.

No marks0/2

It routes the packets using IP addresses (0) so they reach the right destination.

Why: Routing using IP addresses is the internet layer, not the transport layer, so no credit is given.

6Explain2 marksWired Connections Swap Remove

Latency is the delay between data being sent and received. A player of online games uses a wired Ethernet connection instead of a wireless connection.

Explain one reason why the wired connection can have a lower latency.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The cable provides a direct physical path to the switch/router (1) so data does not have to travel through the air where it can be delayed by obstacles such as walls (1)
  • The cable is not shared with other wireless devices (1) so data does not have to wait for a free channel before it is sent (1)
  • The data travels straight along the cable to the switch (1) so the time taken for it to reach its destination is short (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'the wired connection is faster' on its own without saying why the delay between sending and receiving is shorter.

Do not accept a definition of latency without a reason.

Example answers and how they were marked
Full marks2/2

The cable gives the computer a direct physical path to the switch, so the data does not have to travel through the air where it could be delayed by obstacles.

Why: Gives the point of a direct physical path (1) and links it to data not being delayed by obstacles in the air (1).

Some marks1/2

The wired connection gives a direct path, so it is quicker.

Why: Gives the point about the direct path (1) but 'quicker' only restates lower latency and does not explain why the delay is shorter.

No marks0/2

Wired connections have lower latency because the internet speed is faster.

Why: Confuses speed with latency; no reason is given for a shorter delay, and 'faster' on its own is not accepted.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.