Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

8 questions · 12 marks

Pick again
Print
1Multiple choice1 markPacket Switching Swap Remove

Data is broken into packets and sent across the internet.

Identify the device that forwards a packet towards its destination.

[1 mark]
  • AHub
  • BRouter
  • CServer
  • DSwitch
Mark scheme
  • B Router (1)
  • The only correct answer is B. The correct answer is Router.
  • A is not correct because a hub sends the data it receives to every device on the network
  • C is not correct because a server provides services, such as web pages, to client computers
  • D is not correct because a switch forwards data between the devices on one network
Example answers and how they were marked
Full marks1/1

B Router

Why: Selected the correct device: a router reads the destination IP address in each packet and forwards it towards its destination (1).

No marks0/1

D Switch

Why: A near miss: a switch forwards data between devices on one network, but it is a router that forwards packets between networks towards their destination, so no mark.

No marks0/1

A Hub

Why: Misconception from the examiners' reports: confusing LAN hardware with internet routing. A hub sends data to every device on the network and does not read IP addresses to forward packets, so no mark.

2Multiple choice1 markWireless Connections Swap Remove

A wireless network can use the 2.4 GHz or 5 GHz frequency band.

Identify the advantage of using the 5 GHz band instead of the 2.4 GHz band.

[1 mark]
  • AGreater range
  • BHigher data transfer speed
  • CMore able to pass through walls
  • DUses less bandwidth
Mark scheme
  • B Higher data transfer speed (1)
  • The only correct answer is B. The correct answer is higher data transfer speed.
  • A is not correct because the 2.4 GHz band has the greater range
  • C is not correct because the 2.4 GHz band passes through walls more easily
  • D is not correct because the 5 GHz band does not use less bandwidth
Example answers and how they were marked
Full marks1/1

B Higher data transfer speed

Why: Correct advantage: 5 GHz gives higher data transfer rates (1).

No marks0/1

A Greater range

Why: Greater range is a feature of the 2.4 GHz band, not an advantage of 5 GHz; no mark.

No marks0/1

C More able to pass through walls

Why: 5 GHz signals are less able to pass through walls than 2.4 GHz signals; no mark.

3Short recall1 markAddressing Swap Remove

Routers forward data packets across the internet.

State the part of a data packet that a router uses to decide where to send it.

[1 mark]
Mark scheme

Award one mark for:

  • (Destination) IP address (1)

Allow IP address on its own (the destination is implied).

Do not accept source IP address/IP address of the sender.

Do not accept MAC address.

Do not accept domain name/web address.

Example answers and how they were marked
Full marks1/1

The destination IP address.

Why: Names the destination IP address (1).

No marks0/1

The domain name.

Why: A domain name is not used by a router to route a packet; it must be translated to an IP address first, so no mark.

No marks0/1

The MAC address.

Why: A MAC address is not used to route packets across the internet; the Do not accept line applies.

4Short recall1 markWired Connections Swap Remove

Wired connections have characteristics that affect network performance.

State what is meant by the range of a wired network connection.

[1 mark]
Mark scheme

Award one mark for:

  • The maximum distance data/a signal can be transmitted before it becomes too weak to be received (1)

Allow 'how far a signal can travel'.

Do not accept the number of devices that can be connected to the network.

Do not accept the speed at which data is transmitted.

Do not accept bandwidth/the maximum capacity of a channel.

Do not accept latency/the delay between a signal being sent and received.

Example answers and how they were marked
Full marks1/1

The maximum distance a signal can be transmitted before it becomes too weak to be received.

Why: Gives the maximum distance a signal can be transmitted before it becomes too weak, which is the creditworthy point (1).

No marks0/1

The maximum capacity of the connection.

Why: This describes bandwidth, which the mark scheme says not to accept for range, so no mark.

No marks0/1

The delay between a signal being sent and received.

Why: This describes latency/delay, which the mark scheme says not to accept for range, so no mark.

5Describe2 marksWired Connections Swap Remove

A school connects its desktop computers to the network using Ethernet cables.

Describe one way that using a wired connection can give a faster transfer of data than a wireless connection.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • (Ethernet) cables are not affected by interference from other devices (1) so data is transferred at a consistent/steady speed (1)
  • Each device has its own cable to the switch (1) so the full bandwidth is available to that device and speeds do not drop as more users join (1)
  • Fibre optic cable has a higher bandwidth than a wireless link (1) so more data can be sent along the cable each second (1)
  • The cable gives a direct/physical path to the switch (1) so data is less likely to be lost and resent, which would slow the transfer (1)

Do not accept responses about security, reliability or users being unable to move around, as these are not about speed.

Do not accept answers that only say a wired/cable connection is faster, or that fibre is faster, without saying why.

Example answers and how they were marked
Full marks2/2

The cable is not affected by interference from other devices such as other networks or microwaves (1) so the data is sent at a steady speed instead of slowing down (1).

Why: Point that the cable is not affected by interference (1) linked to a consistent data transfer speed (1).

Some marks1/2

Ethernet cables are not affected by interference.

Why: Gives the first point of a linked pair (1) but does not develop it to say how this makes the transfer faster.

No marks0/2

A wired connection is faster because the data travels down a cable and not through the air.

Why: Repeats the question (wired is faster) with no reason, which the mark scheme's final line says is not accepted.

6Describe2 marksWired Connections Swap Remove

A farm uses wired connections to link sensors in its fields to a computer in the farmhouse.

Describe how the range of a wired connection can affect the performance of this network.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • (Twisted pair/copper) cable only carries data over a limited distance (about 100 metres) (1) so sensors further away need another switch/device to pass the data on to the farmhouse (1)
  • Fibre optic cable can carry data over much longer distances (1) so wired connections can reach sensors across the whole farm (1)
  • Data sent further than the cable's range is not received (1) so the computer in the farmhouse does not get readings from those sensors (1)
  • A wireless connection can reach sensors that are out of range of the cables (1) so a mix of the two can give readings across the whole site (1)

Allow responses about signal weakening/being lost over a long cable.

Do not accept responses about bandwidth or speed, as range is about distance, not the amount or rate of data.

Example answers and how they were marked
Full marks2/2

Twisted pair copper cable only carries data for about 100 metres (1) so a switch is needed in each field to pass the readings on to the farmhouse (1).

Why: Point that copper cable has a limited distance (1) linked to needing another device to extend the network (1).

Some marks1/2

Fibre optic cable can carry data much further than copper cable.

Why: Gives the first point of a linked pair (1) but does not develop it to say what this allows the farm to do.

No marks0/2

A longer cable gives the network a bigger bandwidth so the sensors work faster.

Why: About bandwidth and speed rather than range, which the mark scheme says is not accepted.

7Explain2 marksPacket Switching Swap Remove

A router connects a home network to the internet.

Explain how a router uses the destination IP address in a packet header.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The router reads the destination IP address (1) so it knows which network/device the packet is for (1)
  • The router looks up the destination IP address in its routing table (1) to find the next router/route for the packet (1)
  • The router forwards the packet to the next router (1) that leads towards that IP address / is on the best route (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept MAC address - routers use the IP address to route packets between networks.

Do not accept 'it finds the exact device' without saying how the router uses the address, e.g. routing table/next router.

Example answers and how they were marked
Full marks2/2

The router looks up the destination IP address in its routing table to find the next router to send the packet to.

Why: Linked point (1) and reason (1): looks up the destination IP address in the routing table to find the next router.

Some marks1/2

It reads the destination IP address.

Why: Reads the destination IP address (1) but gives no linked reason about a routing table or next router.

No marks0/2

It reads the MAC address so it knows which computer sent the packet.

Why: Routers use the IP address to route packets, not the MAC address; no creditworthy point.

8Explain2 marksThe Internet Swap Remove

Every device that connects to the internet is given an IP address.

Explain one reason why every device on the internet needs a unique IP address.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Data/packets are delivered to the correct device (1) because the IP address identifies that device on the internet (1)
  • A reply is sent back to the device that made a request (1) because the sender's IP address is used as the destination address for the reply (1)
  • Routers can forward packets to the right device (1) because each packet's destination IP address matches only one device (1)
  • A device can be contacted by other devices (1) because other devices use its IP address to send data to it (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'so the router knows where to send data' only when expanded to say the IP address identifies the destination device / is used by routers to forward the packet to that device.

Do not accept 'so it can connect to the internet' / 'so it can access the internet' without saying how the address is used to identify the device or deliver data to it.

Do not accept 'so the device can be identified' on its own without saying what the identification is used for, e.g. delivering data or returning a reply.

Do not award a mark for restating that an IP address is unique / every device has a different address.

Example answers and how they were marked
Full marks2/2

So that data reaches the correct device. The IP address is how the internet tells one device apart from another, so packets are sent to that device and not to a different one.

Why: Point (1): data reaches the correct device. Reason (1): the IP address identifies/tells devices apart, so packets are sent to that device.

Some marks1/2

So that packets go to the right device, because every device has a different address.

Why: Point (1): packets go to the right device. The reason only restates that every device has a different address, which the mark scheme says does not earn the second mark.

No marks0/2

So it can connect to the internet.

Why: No linked explanation of how the address is used; 'so it can connect to the internet' is not accepted without expansion.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.