Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Multiple choice1 markPacket Switching Swap Remove

Data is broken into packets and sent across the internet.

Identify the device that forwards a packet towards its destination.

[1 mark]
  • AHub
  • BRouter
  • CServer
  • DSwitch
Mark scheme
  • B Router (1)
  • The only correct answer is B. The correct answer is Router.
  • A is not correct because a hub sends the data it receives to every device on the network
  • C is not correct because a server provides services, such as web pages, to client computers
  • D is not correct because a switch forwards data between the devices on one network
Example answers and how they were marked
Full marks1/1

B Router

Why: Selected the correct device: a router reads the destination IP address in each packet and forwards it towards its destination (1).

No marks0/1

D Switch

Why: A near miss: a switch forwards data between devices on one network, but it is a router that forwards packets between networks towards their destination, so no mark.

No marks0/1

A Hub

Why: Misconception from the examiners' reports: confusing LAN hardware with internet routing. A hub sends data to every device on the network and does not read IP addresses to forward packets, so no mark.

2Short recall2 marksWired Connections Swap Remove

A company can choose between two wired connections. Connection B has a higher bandwidth than connection A.

Give two benefits to the company of choosing connection B.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Files/data download/upload more quickly (1)
  • More employees can use the connection at the same time without it slowing down (1)
  • Web pages/streamed video load more quickly with less buffering (1)
  • Video calls/conferencing run at a higher quality (1)
  • Updates/backups can be completed in less time (1)

Allow 'multiple users' or 'more devices' for the shared-use point

Allow 'video streams more quickly' or 'less buffering' on their own

Do not accept lower latency, as a higher bandwidth does not reduce latency

Do not accept 'more data can be transferred per second' or 'a bigger bandwidth', as these repeat what bandwidth is

Do not accept 'more reliable' on its own, as a higher bandwidth does not make a wired connection more reliable

Example answers and how they were marked
Full marks2/2

Files will download more quickly, and more employees can use the internet at the same time without the connection slowing down.

Why: Files download more quickly (1) and more users without slowdown (1).

Some marks1/2

Web pages will load faster and the connection will have a longer range.

Why: Web pages load faster (1); the range of a connection is not increased by bandwidth, so that point is not credited.

No marks0/2

The connection will be more reliable because it has a bigger bandwidth.

Why: 'More reliable' is not credited on its own and 'bigger bandwidth' repeats the question, so no marks.

3Describe2 marksWired Connections Swap Remove

A hospital connects the computers on a ward using wired connections.

Describe how using wired connections can reduce latency on this network.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Data travels along the cable directly to the switch on a single continuous path (1) so the time between sending and receiving the data is short (1)
  • A cable is not affected by interference from other devices/wireless traffic nearby (1) so packets are not lost and resent, which would add to the delay (1)
  • The switch sends the data only to the port of the correct device, not to every device (1) so the data spends less time travelling and the delay is lower (1)
  • Fewer devices share a cable than share a wireless channel (1) so packets do not queue/wait before they are sent (1)

The first mark is for the way the wired connection carries the data; the second mark is for how this reduces the delay between sending and receiving.

Do not accept responses about bandwidth or the amount of data a cable can carry, as latency is the delay between sending and receiving.

Do not accept responses that confuse latency with speed/bandwidth, e.g. 'a wired connection is faster so there is less latency', unless they describe how the delay is reduced.

Do not accept answers that only say a wired connection is faster, with no link to the delay.

Example answers and how they were marked
Full marks2/2

The cable is not affected by interference from other devices so packets do not need to be resent and the delay stays low.

Why: First mark for the cable being free of interference (1); linked development that no packets are resent and so the delay is lower (1).

Some marks1/2

There is no interference from other devices on a cable.

Why: Gives the first point of a linked pair (1) but does not say how this reduces the delay between sending and receiving.

No marks0/2

Wired connections have a higher bandwidth so there is less latency.

Why: Confuses bandwidth with latency, which the 'Do not accept' lines rule out (0).

4Explain2 marksAddressing Swap Remove

The internet is moving from IPv4 addresses to IPv6 addresses.

Explain why IPv6 addresses are needed.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • IPv4 addresses are 32-bit (1) so there are only about 4 billion of them/not enough for every device (1)
  • More devices are connecting to the internet than IPv4 can address (1) so a larger range of addresses is needed (1)
  • IPv6 uses 128-bit addresses (1) so far more devices can be given an address (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'IPv6 is newer/better/faster/more secure' without a link to the number of addresses available.

Example answers and how they were marked
Full marks2/2

IPv4 addresses are only 32 bits long, so there are not enough of them for all the devices that now connect to the internet.

Why: Point that IPv4 addresses are 32-bit (1) and linked reason that this limits the number of addresses below the number of devices (1).

Some marks1/2

Because we have run out of IPv4 addresses.

Why: A valid point (1) but no linked reason about why IPv4 addresses are limited, such as the 32-bit size or the number of devices.

No marks0/2

Because IPv6 is newer and more secure than IPv4.

Why: No link to the number of addresses available; the mark scheme says not to accept newer/better/more secure on its own.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 65
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 12 questions

5.3 Cybersecurity

Malware 8 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.