Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 8 marks

Pick again
Print
1Short recall2 marksPrimary Memory Swap Remove

A computer is designed using the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The program instructions and data are stored together in main memory/RAM (1)
  • The same memory is used for both instructions and data (1)
  • The instructions are fetched from main memory and executed by the CPU (1)
  • The instructions are fetched and executed one at a time / in sequence (1)
  • The program can be changed/replaced by loading new instructions into memory, without changing the hardware (1)

Do not accept the program is stored in secondary storage / on the hard disk.

Do not accept the program is stored in the CPU / in registers.

Example answers and how they were marked
Full marks2/2

The program instructions and the data are stored together in main memory, and the CPU fetches the instructions one at a time and executes them.

Why: Creditworthy point that instructions and data are stored in the same main memory (1) and the linked point that the CPU fetches and executes them from memory (1).

Some marks1/2

The program is held in the main memory (RAM) so that the computer can run it.

Why: Earns the point that the program instructions are stored in main memory (1), but does not say that the CPU fetches and executes them, so the second mark is not earned.

No marks0/2

The program is stored on the hard disk and loaded into the CPU when it is run.

Why: Both parts are misconceptions named in the Do not accept lines: the stored program concept keeps the instructions in main memory, not on secondary storage or in the CPU.

2Describe2 marksStored Program Computers Swap Remove

A computer is based on the von Neumann stored program concept.

Describe how the CPU uses main memory (RAM) during the fetch-decode-execute cycle.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The program's instructions (and the data it uses) are held in main memory/RAM (1) so the CPU fetches both the instructions and the data from that one memory (1)
  • The CPU fetches the next instruction from main memory/RAM (1) using the address of the memory location that holds it (1)
  • The CPU reads/fetches data from main memory/RAM (1) when an instruction needs it and writes the result back to main memory/RAM (1)
  • The program's instructions are held in main memory/RAM while the program runs (1) and the CPU fetches them one at a time/one after another to be decoded and executed (1)

Allow 'memory' for main memory/RAM.

Allow 'gets' for fetches/reads.

For both marks, the development must say what the CPU does with the contents of main memory (fetches/reads/writes), not just that main memory is used.

Do not accept answers about the program being stored in secondary storage, such as on a hard drive, or about it being loaded from there.

Do not accept benefits such as the computer running faster or being easier for the user.

Do not accept naming CPU components (control unit, arithmetic logic unit, registers) or buses on their own, without saying what is stored or fetched.

Do not accept 'the computer stores data' on its own, without a link to the instructions of a program.

Example answers and how they were marked
Full marks2/2

The program's instructions and the data it uses are both held in the same main memory (RAM), so the CPU can fetch the instructions and the data it needs from that one memory.

Why: Linked point (1) that instructions and data are stored together in main memory, with the development (1) that the CPU fetches both from the same memory.

Some marks1/2

The CPU fetches the instructions from main memory so that they are processed more quickly.

Why: The first point earns (1) for the CPU fetching instructions from main memory. The second statement is a benefit (speed), which the 'Do not accept benefits' line rules out, so it earns nothing.

No marks0/2

The control unit decodes each instruction and the ALU carries out the calculations.

Why: Both statements name CPU components without saying what is stored, fetched or written, which the mark scheme tells examiners not to accept, so neither earns a mark.

3Describe2 marksStored Program Computers Swap Remove

The control unit (CU) is a component inside the CPU.

Describe the role of the control unit in the fetch-decode-execute cycle.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Decodes each (fetched) instruction (1) to work out which operation is needed / which components should carry it out (1)
  • Coordinates/directs the other components (1) by sending control signals along the control bus (1)
  • Fetches the next instruction (1) by sending its address to main memory along the address bus (1)
  • Sends a read/write control signal to main memory (1) so that the instruction or data is transferred during the fetch/execute stage (1)

Do not accept answers about synchronising the CPU or timing the cycles (that is the role of the clock).

Do not accept answers about carrying out arithmetic or logical operations (that is the ALU).

Do not accept answers about holding data or the results of instructions (that is registers/main memory).

Do not accept generic answers that only say the CU controls the CPU or processes instructions, with no linked development.

Only award one mark for a response that only repeats that the CU sends control signals; the second mark needs a linked outcome such as coordination, a memory read/write, or fetching an instruction.

Do not accept 'during the decode stage' as the development for the decoding point, as it restates the question.

Example answers and how they were marked
Full marks2/2

It decodes the instruction that has been fetched so that it knows which operation the CPU must carry out and which components should do it.

Why: Decoding named with the acceptable wording 'each (fetched) instruction' (1), plus the linked development that this identifies the operation and components (1).

Some marks1/2

It decodes each instruction during the decode stage of the cycle.

Why: Earns (1) for decoding the instruction. 'During the decode stage' restates the question and is not accepted as a development, so the second mark is not earned.

No marks0/2

It carries out the calculations and comparisons when the instruction is executed.

Why: Calculations and comparisons are the ALU's role, which the 'Do not accept' line rules out, so no mark is earned.

4Explain2 marksPrimary Memory Swap Remove

RAM is used to store data while a computer is running.

Explain one reason why the data in RAM is lost when a computer is switched off.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • RAM is volatile (memory) (1) because it needs a constant/continuous power supply to hold/store the data it contains (1)
  • Data is held in RAM as electrical states/charges (1) so when the power supply is removed these states cannot be kept/refreshed and the data is lost (1)
  • RAM is used as short-term storage for the data and instructions currently in use (1) because it can only hold them while the computer has power (1)

For both marks, the expansion must follow/associate with the statement and must link the loss of the data to the power supply being removed.

Accept 'RAM is volatile' on its own for the first mark; the second mark is only awarded for a linked reason about the power supply.

Do not accept 'RAM is temporary/short-term memory' or 'RAM is cleared when the computer is switched off' on its own for both marks, as neither gives a reason.

Do not accept answers that say the data is deleted/cleared/erased by the computer or the operating system, or that the data is saved/moved to secondary storage, without saying why the data cannot be kept (e.g. because RAM needs power/is volatile).

Example answers and how they were marked
Full marks2/2

RAM is volatile memory, which means it needs a constant power supply to keep the data it is holding. When the power is switched off, the data is lost.

Why: Linked point (1) for 'RAM is volatile memory' and reason (1) for needing a constant power supply to hold the data.

Some marks1/2

The data in RAM is lost because RAM is volatile memory.

Why: Point (1) for 'RAM is volatile' but no linked reason about the power supply, and the mark scheme states that 'RAM is volatile' alone earns only the first mark.

No marks0/2

The data is deleted from RAM by the operating system when the computer is shut down so that the memory is free for next time.

Why: No creditworthy point: the answer says the data is deleted without saying why it cannot be kept, which the mark scheme's 'Do not accept' line rules out.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.