Edexcel GCSE Computer Science (1CP2) Exam Questions

Award one mark for any of the following up to a maximum of two marks:

• The program instructions and data are stored together in main memory/RAM (1)
• The same memory is used for both instructions and data (1)
• The instructions are fetched from main memory and executed by the CPU (1)
• The instructions are fetched and executed one at a time / in sequence (1)
• The program can be changed/replaced by loading new instructions into memory, without changing the hardware (1)

Do not accept the program is stored in secondary storage / on the hard disk.

Do not accept the program is stored in the CPU / in registers.

Award one mark for:

• Laser (1)

Allow laser beam

Do not accept read/write head

Do not accept pits

Do not accept lands

Do not accept reflective surface

Do not accept magnet/magnetic

Indicative content

How data is stored on optical media

• Data is stored as pits and lands burnt or pressed into a spiral track on the disc.
• A laser beam is shone at the disc and the light that is reflected back is measured; pits and lands reflect the light differently.
• The differences in the reflected light are read as binary 1s and 0s.

Benefits of optical discs for selling films

• Optical discs are cheap to mass produce once the master disc has been pressed, so the studio can sell each film at a low price.
• A disc is small and light, so a customer can easily store it, carry it home or give it as a gift.
• A Blu-ray disc can hold a whole high-definition film (up to 50 GB), so a customer can watch the film without an internet connection.
• Artwork can be printed on the disc and its case, which helps the studio sell the film.

Drawbacks of optical discs for selling films

• A DVD holds only about 8.4 GB, so a high-definition film with extra features may not fit on one and the studio would need to sell it on a Blu-ray instead.
• Optical discs are easily scratched, which can cause read errors so the film will not play.
• Many modern devices, such as some laptops, no longer have a disc drive, so some customers would not be able to play the film.
• Discs can be affected by heat and sunlight, so they may deteriorate over time.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 2 requires points to be linked or developed, for example a benefit or drawback explained in terms of the studio or its customers. An answer that only lists basic, independent points, with no linkage, is limited to Level 1.
• Level 3 requires all three areas and a judgement about whether the studio should keep selling films on optical discs. Do not credit magnetic storage or solid state storage as a description of how optical media stores data; credit these only where they are compared with optical media.

Indicative content

Stored program concept

• The stored program concept means that the program instructions and the data the program is using are both held in the same main memory (RAM).
• The CPU fetches an instruction from main memory, the control unit decodes it and the instruction is executed, and this is repeated in the fetch-decode-execute cycle.
• The program is stored as a set of binary instructions, so a different program can be run on the college's new computers by loading different instructions into RAM rather than by changing any hardware.
• Instructions are usually carried out one at a time, in the order in which they are stored, which is suitable for the computers in the IT suite that each run one piece of software at a time.

Main memory (RAM)

• Main memory (RAM) holds the instructions and the data that the CPU is currently using.
• RAM is directly accessible by the CPU, so the required instruction or item of data can be fetched quickly during the fetch stage of the cycle.
• RAM can be read from and written to while a program is running, so the results produced by the students' work can be stored back into memory.
• RAM is volatile, so its contents are lost when the power is turned off, and the college's computers will have empty RAM each time they are started.

CPU components

• The control unit decodes each instruction and coordinates the timing and control of the other parts of the CPU, so it directs the fetch-decode-execute cycle.
• The arithmetic logic unit (ALU) carries out arithmetic operations and logical comparisons on the data, for example working out a student's total mark in a spreadsheet.
• Registers are small, fast storage locations inside the CPU that hold the address of the next instruction, the instruction being decoded and the data being worked on.
• The clock sends a regular signal that synchronises the actions of the CPU, so each step of the cycle is carried out in time with the clock.

Buses

• The address bus is one way, from the CPU to main memory, and carries the address of the memory location that the CPU wants to read from or write to.
• The data bus carries the instruction or the data between the CPU and main memory, so it is used to bring an instruction to the CPU in the fetch stage.
• The control bus carries control signals such as read and write, so the CPU can tell main memory whether it is reading an instruction or writing data.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 responses must cover the role of main memory (RAM) and the role of the CPU components or the buses during the fetch-decode-execute cycle, as well as the stored program concept.
• Do not accept RAM described as being inside the CPU, or as non-volatile, or any point about how clock speed affects performance, because the question excludes it.