Edexcel GCSE Computer Science (1CP2) Exam Questions

Award one mark for any of the following up to a maximum of two marks:

• The program instructions and data are stored together in main memory/RAM (1)
• The same memory is used for both instructions and data (1)
• The instructions are fetched from main memory and executed by the CPU (1)
• The instructions are fetched and executed one at a time / in sequence (1)
• The program can be changed/replaced by loading new instructions into memory, without changing the hardware (1)

Do not accept the program is stored in secondary storage / on the hard disk.

Do not accept the program is stored in the CPU / in registers.

Award up to two marks for a linked explanation such as:

• RAM is volatile (memory) (1) because it needs a constant/continuous power supply to hold/store the data it contains (1)
• Data is held in RAM as electrical states/charges (1) so when the power supply is removed these states cannot be kept/refreshed and the data is lost (1)
• RAM is used as short-term storage for the data and instructions currently in use (1) because it can only hold them while the computer has power (1)

For both marks, the expansion must follow/associate with the statement and must link the loss of the data to the power supply being removed.

Accept 'RAM is volatile' on its own for the first mark; the second mark is only awarded for a linked reason about the power supply.

Do not accept 'RAM is temporary/short-term memory' or 'RAM is cleared when the computer is switched off' on its own for both marks, as neither gives a reason.

Do not accept answers that say the data is deleted/cleared/erased by the computer or the operating system, or that the data is saved/moved to secondary storage, without saying why the data cannot be kept (e.g. because RAM needs power/is volatile).

Indicative content

How data is stored on optical media

• Data is stored as pits and lands burnt or pressed into a spiral track on the disc.
• A laser beam is shone at the disc and the light that is reflected back is measured; pits and lands reflect the light differently.
• The differences in the reflected light are read as binary 1s and 0s.

Benefits of optical discs for selling films

• Optical discs are cheap to mass produce once the master disc has been pressed, so the studio can sell each film at a low price.
• A disc is small and light, so a customer can easily store it, carry it home or give it as a gift.
• A Blu-ray disc can hold a whole high-definition film (up to 50 GB), so a customer can watch the film without an internet connection.
• Artwork can be printed on the disc and its case, which helps the studio sell the film.

Drawbacks of optical discs for selling films

• A DVD holds only about 8.4 GB, so a high-definition film with extra features may not fit on one and the studio would need to sell it on a Blu-ray instead.
• Optical discs are easily scratched, which can cause read errors so the film will not play.
• Many modern devices, such as some laptops, no longer have a disc drive, so some customers would not be able to play the film.
• Discs can be affected by heat and sunlight, so they may deteriorate over time.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 2 requires points to be linked or developed, for example a benefit or drawback explained in terms of the studio or its customers. An answer that only lists basic, independent points, with no linkage, is limited to Level 1.
• Level 3 requires all three areas and a judgement about whether the studio should keep selling films on optical discs. Do not credit magnetic storage or solid state storage as a description of how optical media stores data; credit these only where they are compared with optical media.

Indicative content

Fetching and decoding an instruction

• The register that holds the address of the next instruction (the program counter) contains the address of the instruction to be fetched.
• This address is sent to main memory (RAM) and the instruction is copied from main memory into a register inside the CPU.
• The program counter is updated so that it holds the address of the next instruction in the program.
• The control unit decodes the instruction that has been fetched, working out which operation is required and which data or registers are needed.
• The control unit sends control signals to coordinate the other components as the instruction is carried out.
• The control unit decides what happens next, for example after a comparison it decides whether the next instruction is the following one or a jump.

The arithmetic logic unit (ALU) executes an instruction

• The control unit directs the arithmetic logic unit (ALU) to carry out the operation.
• The ALU performs arithmetic operations such as addition, subtraction, multiplication and division, for example adding two values in a program written by the class.
• The ALU performs logical operations such as comparing two values to see if they are equal or whether one is greater than the other.
• The result of the operation carried out by the ALU is passed back and stored in a register.
• The ALU operates on data that has been fetched from main memory; it does not fetch the instruction and it does not decide which instruction is next.

Registers

• Registers are small, very fast memory locations inside the CPU.
• They hold the data, addresses and results that the CPU is working on during the cycle.
• Registers are used in every stage of the cycle, not only when the ALU produces a result.
• Because registers are inside the CPU they can be read and written much faster than main memory during the cycle.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)
• A Level 3 answer must link the roles of all three components to the fetch, decode and execute stages. An answer that links only one component to a stage, with the other points listed separately, is Level 1 (1–2 marks); an answer that links two of the components to stages is Level 2 (3–4 marks). A point repeated under more than one heading is credited once only.
• Accept 'the program counter', 'the address register' or 'a register holding the address of the next instruction' as the register that holds the address of the next instruction. Do not accept 'the control unit performs the calculations', 'the ALU controls the timing of the CPU' / 'the ALU sends the clock signal' or 'registers are in main memory (RAM)'.