Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 8 marks

Pick again
Print
1Short recall2 marksPrimary Memory Swap Remove

A computer is designed using the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The program instructions and data are stored together in main memory/RAM (1)
  • The same memory is used for both instructions and data (1)
  • The instructions are fetched from main memory and executed by the CPU (1)
  • The instructions are fetched and executed one at a time / in sequence (1)
  • The program can be changed/replaced by loading new instructions into memory, without changing the hardware (1)

Do not accept the program is stored in secondary storage / on the hard disk.

Do not accept the program is stored in the CPU / in registers.

Example answers and how they were marked
Full marks2/2

The program instructions and the data are stored together in main memory, and the CPU fetches the instructions one at a time and executes them.

Why: Creditworthy point that instructions and data are stored in the same main memory (1) and the linked point that the CPU fetches and executes them from memory (1).

Some marks1/2

The program is held in the main memory (RAM) so that the computer can run it.

Why: Earns the point that the program instructions are stored in main memory (1), but does not say that the CPU fetches and executes them, so the second mark is not earned.

No marks0/2

The program is stored on the hard disk and loaded into the CPU when it is run.

Why: Both parts are misconceptions named in the Do not accept lines: the stored program concept keeps the instructions in main memory, not on secondary storage or in the CPU.

2Describe2 marksFetch Decode Execute Cycle Swap Remove

The control unit is one component of the CPU.

Describe the role of the control unit in the fetch-decode-execute cycle.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Decodes instructions (1) to determine what action/operation is required (1)
  • Sends control signals (1) along the control bus to coordinate/control the actions of other components (1)
  • Controls the fetch stage (1) by causing the next instruction to be fetched from main memory/RAM (1)
  • Controls the execute stage (1) by telling the ALU/other components when to carry out the required operation (1)

Do not accept responses relating to how the control unit affects performance, such as increasing clock speed.

Do not accept responses that describe the role of the ALU, registers or clock instead of the control unit.

Do not accept responses about the ALU performing calculations unless the control unit controlling the ALU is also stated.

Example answers and how they were marked
Full marks2/2

The control unit decodes instructions to determine what action is required.

Why: Linked point (1) and development (1): decodes instructions and determines the required action.

Some marks1/2

The control unit controls the fetch stage of the cycle.

Why: Point only (1): controls the fetch stage, but no linked development.

No marks0/2

The control unit carries out arithmetic and logical operations on data.

Why: No creditworthy point: describes the role of the ALU, which the mark scheme rejects.

3Explain2 marksEmbedded Systems Swap Remove

A greenhouse uses an embedded system to keep the plants healthy.

Explain how the embedded system controls the temperature in the greenhouse.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • A temperature sensor measures/reads the temperature in the greenhouse (1) which the processor compares with the value stored in the system (1)
  • The heater is switched on (1) when the temperature reading goes below the value stored in the system (1)
  • A fan/vent/window is opened/a cooler is switched on (1) when the temperature reading goes above the value stored in the system (1)
  • The temperature is checked/measured continuously (1) so the heater/fan is switched on or off as soon as the temperature changes (1)

For both marks, the expansion must follow/associate with the statement.

Allow one mark for a correct point on its own without a linked reason, e.g. 'a temperature sensor measures the temperature'.

Do not award 'the embedded system controls/keeps the temperature correct' as this repeats the question.

Do not accept naming a device without saying what it does, e.g. 'the greenhouse has a thermostat'.

Example answers and how they were marked
Full marks2/2

A temperature sensor measures the temperature in the greenhouse, which the processor compares with the value stored in the system.

Why: Point (1): the input and what it measures. Reason (1): the linked statement about what the processor does with the reading.

Some marks1/2

The embedded system uses a temperature sensor that measures the temperature in the greenhouse.

Why: A correct point on its own (1); no linked statement about what the system does with the reading, so the second mark is not awarded.

No marks0/2

The embedded system controls the temperature so the plants do not get too cold.

Why: Rewords the question without saying how the temperature is measured or changed, so no mark is awarded.

4Explain2 marksPrimary Memory Swap Remove

RAM is used to store data while a computer is running.

Explain one reason why the data in RAM is lost when a computer is switched off.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • RAM is volatile (memory) (1) because it needs a constant/continuous power supply to hold/store the data it contains (1)
  • Data is held in RAM as electrical states/charges (1) so when the power supply is removed these states cannot be kept/refreshed and the data is lost (1)
  • RAM is used as short-term storage for the data and instructions currently in use (1) because it can only hold them while the computer has power (1)

For both marks, the expansion must follow/associate with the statement and must link the loss of the data to the power supply being removed.

Accept 'RAM is volatile' on its own for the first mark; the second mark is only awarded for a linked reason about the power supply.

Do not accept 'RAM is temporary/short-term memory' or 'RAM is cleared when the computer is switched off' on its own for both marks, as neither gives a reason.

Do not accept answers that say the data is deleted/cleared/erased by the computer or the operating system, or that the data is saved/moved to secondary storage, without saying why the data cannot be kept (e.g. because RAM needs power/is volatile).

Example answers and how they were marked
Full marks2/2

RAM is volatile memory, which means it needs a constant power supply to keep the data it is holding. When the power is switched off, the data is lost.

Why: Linked point (1) for 'RAM is volatile memory' and reason (1) for needing a constant power supply to hold the data.

Some marks1/2

The data in RAM is lost because RAM is volatile memory.

Why: Point (1) for 'RAM is volatile' but no linked reason about the power supply, and the mark scheme states that 'RAM is volatile' alone earns only the first mark.

No marks0/2

The data is deleted from RAM by the operating system when the computer is shut down so that the memory is free for next time.

Why: No creditworthy point: the answer says the data is deleted without saying why it cannot be kept, which the mark scheme's 'Do not accept' line rules out.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.