Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

8 questions · 13 marks

Pick again
Print
1Multiple choice1 markLANs & WANs Swap Remove

A hospital has computers, printers and servers in one building.

Identify the type of network that connects these devices.

[1 mark]
  • ALAN
  • BPAN
  • CVPN
  • DWAN
Mark scheme
  • A LAN (1)
  • The only correct answer is A. The correct answer is LAN (Local Area Network).
  • B is not correct because a PAN connects devices around one person over a short range
  • C is not correct because a VPN is a secure private connection made over a public network, not a network covering one building
  • D is not correct because a WAN connects networks over a large geographical area
Example answers and how they were marked
Full marks1/1

A LAN

Why: Correct option: a LAN connects devices on one site, such as one building (1).

No marks0/1

D WAN

Why: Near miss: a WAN connects networks over a large geographical area, not devices within one building (0).

No marks0/1

C VPN

Why: Misconception: a VPN is a secure connection over a public network, not the type of network for devices in one building (0).

2Short recall1 markThe Internet Swap Remove

Data packets are sent across the internet.

Name the device that uses IP addresses to forward a data packet from one network to another.

[1 mark]
Mark scheme

Award one mark for:

  • Router (1)

Allow routers (plural).

Allow minor spelling errors that are clearly router, e.g. rooter.

Do not accept switch, hub (these forward data within a network, not between networks), modem or server.

Do not accept gateway on its own.

Example answers and how they were marked
Full marks1/1

Router

Why: Correct device named (1).

No marks0/1

Modem

Why: Modem is not accepted; it is not the device that forwards packets between networks (0).

No marks0/1

Server

Why: A server is not accepted; it does not forward packets between networks (0).

3Convert1 markBinary to Denary Conversion Swap Remove

Computers manipulate binary patterns.

Convert the binary pattern 1010 0100 to denary.

[1 mark]
Mark scheme

Award one mark for:

  • 164 (1)
Example answers and how they were marked
Full marks1/1

164

Why: Correct: 128 + 32 + 4 = 164 (1).

No marks0/1

37

Why: Reads the place values from the wrong end (the left-hand bit as 1), so the value is wrong.

No marks0/1

3

Why: Counts the 1s instead of adding their place values.

4Short recall2 marksCharacter Sets Swap Remove

ASCII is a character set that uses 7 bits to represent each character.

Give two limitations of 7-bit ASCII when it is used to represent text.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • (Only) 128 different characters can be represented / 7 bits give 2^7 = 128 different codes (1)
  • It cannot represent characters from languages other than English / non-English alphabets, e.g. Greek, Chinese (1)
  • It cannot represent accented characters, e.g. é, ñ (1)
  • It cannot represent symbols or emoji that are not in the ASCII character set (1)

Award a maximum of one mark for the last three bullets, as they are all examples of characters that fall outside the 128 ASCII codes.

Allow 'it can only represent 128 characters, so some characters are missing' for the first bullet.

Do not accept 'it uses 7 bits' / 'it only uses 7 bits' on its own, without saying what this limits.

Do not accept 'it can only store a limited amount of text' / 'it can only store short messages', as 7 bits limits the number of characters available, not the length of a message.

Do not accept 'it can only represent the characters in the ASCII character set', as this repeats the question.

Do not accept 'it is old/out of date' or 'it cannot store numbers'.

Example answers and how they were marked
Full marks2/2

Only 128 different characters can be represented, so it cannot store characters from other languages such as Greek.

Why: 128 character limit (1) and characters from other languages (1); two separate creditworthy limitations.

Some marks1/2

It cannot show accented characters like é and it only uses 7 bits.

Why: Accented characters (1); 'only uses 7 bits' is not qualified, so scores 0.

No marks0/2

It only uses 7 bits, so it can only store a small amount of text.

Why: Scores 0: text length is not a limitation of 7-bit ASCII, and 'only uses 7 bits' is unqualified; both Do not accept lines apply.

5Short recall2 marksUnits & Conversion Swap Remove

A solid state drive has a capacity of 5 gibibytes.

Give an expression to calculate the number of bits in 5 gibibytes. You do not need to do the calculation.

[2 marks]
Mark scheme

Award one mark for each of:

  • 5 × 1024^3 / 5 × 1024 × 1024 × 1024 / 5 × 2^30, for the number of bytes (1)
  • A fully correct expression with × 8 to convert bytes to bits, in any order, e.g. 5 × 1024^3 × 8, 8 × 5 × 2^30 (1)

Accept 5 × 1 073 741 824 × 8.

Accept 5 × 2^33 or 42 949 672 960 as a fully correct expression (2 marks).

Do not accept 5 × 1000^3 × 8, which uses decimal multiples.

Do not accept ÷ 8, which converts bits to bytes.

Example answers and how they were marked
Full marks2/2

8 × 5 × 2^30

Why: 5 × 2^30 is the number of bytes (1) and × 8 converts bytes to bits (1).

Some marks1/2

5 × 2^30

Why: Correct number of bytes using the binary multiple 2^30 (1), but no conversion to bits.

No marks0/2

5 × 1000^3 × 8

Why: Uses decimal 1000^3 instead of binary 1024^3, so the expression is not fully correct; no creditworthy point.

6Describe2 marksUser Management Swap Remove

A computer can be used by more than one person.

Describe how an operating system uses access rights to protect each user's files.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Each user/file is given permissions/access rights (1) so other users cannot read/write/open/change that user's files (1)
  • A user may be given read-only/read access to a file (1) so they cannot edit/delete/change it (1)
  • Each file is given permissions/access rights for different users (1) so the operating system allows/refuses access depending on which user is logged in (1)
  • The operating system checks a user's permissions/access rights when a file is opened (1) so a user with read-only/read access cannot save/delete changes (1)

Do not accept responses about asking for a password/username, as this checks who the user is, not what they are allowed to do.

Do not accept 'files are protected/safe' or 'access rights protect files' without saying how access is limited (e.g. read-only access, permissions for different users).

Example answers and how they were marked
Full marks2/2

A user can be given read-only access to a file, so they can open it but cannot edit or delete it.

Why: Read-only/read access point (1) and linked development that the user cannot edit/delete the file (1).

Some marks1/2

A user can be given read-only access to a file.

Why: Read-only/read access point (1); no development saying what this prevents, such as being unable to edit/delete the file (0).

No marks0/2

The operating system asks for the password again before the file opens.

Why: Describes asking for a password, which checks who the user is, not access rights to the file; no creditworthy point.

7Describe2 marksLow and High Level Languages Swap Remove

A device driver is software that allows the operating system to control a piece of hardware. Device drivers are often written in a low-level programming language.

Describe one reason why a low-level programming language is suitable for writing a device driver.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Instructions can manipulate/control the hardware/memory/registers directly (1) so the driver can control the specific device it is written for (1)
  • The code is written for one specific processor/architecture (1) so it works with the exact hardware it will control (1)
  • The programmer controls exactly how memory/registers are used (1) so the code is efficient and needs little memory, which suits a device that has limited memory (1)
  • Each instruction maps to one machine code instruction (1) so the driver code is small enough to fit in the memory of the device (1)

Extra detail, such as naming the device the driver controls, is not needed to earn the marks.

Do not accept 'it is closer to machine code' on its own: it must be developed to show how this helps the driver, e.g. it can control the hardware directly.

Do not accept 'it is faster/quicker' with no link to the hardware/device, e.g. the device responds quickly.

Do not accept 'it is easier to learn', 'it is easier to debug' or 'it takes less time to write'.

Example answers and how they were marked
Full marks2/2

Low-level instructions can manipulate the hardware and memory directly (1) so the driver can control the specific device it was written for, such as a sound card (1).

Why: Point about direct control of hardware/memory (1) linked to controlling the specific device (1). The named device is extra detail and is not needed.

Some marks1/2

Low-level instructions can manipulate the hardware directly.

Why: Correct point (1) but no linked development saying how this helps the device driver.

No marks0/2

It is closer to machine code so it runs faster than a high-level language.

Why: 'Closer to machine code' is not developed into how this helps the driver, and 'runs faster' is not linked to the hardware/device, so no mark.

8Convert2 marksDenary to Binary Conversion Swap Remove

Binary patterns can represent numbers.

Convert the denary number 199 to 8-bit binary.

[2 marks]
Mark scheme

Award one mark for each correct nibble in the correct order:

  • 1100 (1)
  • 0111 (1)

0 marks if the response is not 8-bit binary.

Example answers and how they were marked
Full marks2/2

1100 0111

Why: 199 = 128 + 64 + 4 + 2 + 1: both nibbles are correct (2).

Some marks1/2

1100 1000

Why: Converts 200 instead (a slip in adding up the place values). The first nibble is correct (1); the second is not.

No marks0/2

1110 0011

Why: The bits are written in reverse, smallest place value first. Neither nibble is correct.

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.