Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 6 marks

Pick again
Print
1Short recall1 markAddressing Swap Remove

Devices are given IP addresses.

Define the term dynamic IP address.

[1 mark]
Mark scheme

Award one mark for:

  • (An IP address that) can change / is not permanent (1)

Allow a changing IP address.

Allow a temporary IP address.

Allow it is assigned each time the device connects to the internet.

Do not accept an IP address that is assigned (automatically) by a router/DHCP without any idea that it can change.

Do not accept static IP address / fixed IP address / an IP address that never changes (this is a static IP address).

Example answers and how they were marked
Full marks1/1

An IP address that can change each time the device connects to the internet.

Why: States that the IP address can change (1).

No marks0/1

An IP address that is assigned automatically by a router.

Why: Describes assignment only; the mark scheme does not accept assignment without the idea that the address can change.

No marks0/1

An IP address that never changes.

Why: Confuses dynamic with static; the Do not accept line applies.

2Short recall1 markWired Connections Swap Remove

Wired connections have characteristics that affect network performance.

State what is meant by the range of a wired network connection.

[1 mark]
Mark scheme

Award one mark for:

  • The maximum distance data/a signal can be transmitted before it becomes too weak to be received (1)

Allow 'how far a signal can travel'.

Do not accept the number of devices that can be connected to the network.

Do not accept the speed at which data is transmitted.

Do not accept bandwidth/the maximum capacity of a channel.

Do not accept latency/the delay between a signal being sent and received.

Example answers and how they were marked
Full marks1/1

The maximum distance a signal can be transmitted before it becomes too weak to be received.

Why: Gives the maximum distance a signal can be transmitted before it becomes too weak, which is the creditworthy point (1).

No marks0/1

The maximum capacity of the connection.

Why: This describes bandwidth, which the mark scheme says not to accept for range, so no mark.

No marks0/1

The delay between a signal being sent and received.

Why: This describes latency/delay, which the mark scheme says not to accept for range, so no mark.

3Describe2 marksWired Connections Swap Remove

A school connects its desktop computers to the network using Ethernet cables.

Describe one way that using a wired connection can give a faster transfer of data than a wireless connection.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • (Ethernet) cables are not affected by interference from other devices (1) so data is transferred at a consistent/steady speed (1)
  • Each device has its own cable to the switch (1) so the full bandwidth is available to that device and speeds do not drop as more users join (1)
  • Fibre optic cable has a higher bandwidth than a wireless link (1) so more data can be sent along the cable each second (1)
  • The cable gives a direct/physical path to the switch (1) so data is less likely to be lost and resent, which would slow the transfer (1)

Do not accept responses about security, reliability or users being unable to move around, as these are not about speed.

Do not accept answers that only say a wired/cable connection is faster, or that fibre is faster, without saying why.

Example answers and how they were marked
Full marks2/2

The cable is not affected by interference from other devices such as other networks or microwaves so the data is sent at a steady speed instead of slowing down.

Why: Point that the cable is not affected by interference (1) linked to a consistent data transfer speed (1).

Some marks1/2

Ethernet cables are not affected by interference.

Why: Gives the first point of a linked pair (1) but does not develop it to say how this makes the transfer faster.

No marks0/2

A wired connection is faster because the data travels down a cable and not through the air.

Why: Repeats the question (wired is faster) with no reason, which the mark scheme's final line says is not accepted.

4Explain2 marksWireless Connections Swap Remove

An office wireless network is near a microwave oven and several other wireless networks.

Explain how interference can affect the speed of a wireless network.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The speed of data transfer is reduced/is slower (1) because interference corrupts the radio signal, so data/packets are lost and have to be resent/retransmitted (1)
  • The network speed is lower (1) because there is more noise on the wireless signal, so data is sent at a lower transmission rate (1)
  • The throughput of the wireless network is reduced (1) because time is used resending corrupted data/packets instead of sending new data (1)

For both marks, the expansion must follow/associate with the statement.

Award 1 mark for a statement that the speed/transfer rate is reduced (e.g. slower, takes longer), even if no reason is given.

Do not accept 'interference damages/corrupts the radio signal' or 'the signal is weaker' on its own without a link to the speed.

Do not accept 'data is lost' on its own without saying how this reduces the speed.

Do not accept 'interference increases the bandwidth' or 'interference makes the signal stronger'.

Example answers and how they were marked
Full marks2/2

Interference corrupts the radio signal, so packets are lost and resent, which makes the data transfer slower.

Why: Linked point (1): data transfer is slower; reason (1): interference corrupts the signal so packets are lost and resent.

Some marks1/2

The speed of the wireless network will be lower.

Why: Point only (1): states the effect on speed. No linked reason why interference causes this.

No marks0/2

Interference increases the bandwidth, so the data travels faster.

Why: Misconception that interference increases bandwidth; the mark scheme says not to accept this.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 45
Data Protection Act 17 questions Impact of AI 16 questions Intellectual Property 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.