Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 9 marks

Pick again
Print
1Short recall1 markAddressing Swap Remove

Routers forward data packets across the internet.

State the part of a data packet that a router uses to decide where to send it.

[1 mark]
Mark scheme

Award one mark for:

  • (Destination) IP address (1)

Allow IP address on its own (the destination is implied).

Do not accept source IP address/IP address of the sender.

Do not accept MAC address.

Do not accept domain name/web address.

Example answers and how they were marked
Full marks1/1

The destination IP address.

Why: Names the destination IP address (1).

No marks0/1

The domain name.

Why: A domain name is not used by a router to route a packet; it must be translated to an IP address first, so no mark.

No marks0/1

The MAC address.

Why: A MAC address is not used to route packets across the internet; the Do not accept line applies.

2Short recall2 marksWired Connections Swap Remove

A company can choose between two wired connections. Connection B has a higher bandwidth than connection A.

Give two benefits to the company of choosing connection B.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Files/data download/upload more quickly (1)
  • More employees can use the connection at the same time without it slowing down (1)
  • Web pages/streamed video load more quickly with less buffering (1)
  • Video calls/conferencing run at a higher quality (1)
  • Updates/backups can be completed in less time (1)

Allow 'multiple users' or 'more devices' for the shared-use point

Allow 'video streams more quickly' or 'less buffering' on their own

Do not accept lower latency, as a higher bandwidth does not reduce latency

Do not accept 'more data can be transferred per second' or 'a bigger bandwidth', as these repeat what bandwidth is

Do not accept 'more reliable' on its own, as a higher bandwidth does not make a wired connection more reliable

Example answers and how they were marked
Full marks2/2

Files will download more quickly, and more employees can use the internet at the same time without the connection slowing down.

Why: Files download more quickly (1) and more users without slowdown (1).

Some marks1/2

Web pages will load faster and the connection will have a longer range.

Why: Web pages load faster (1); the range of a connection is not increased by bandwidth, so that point is not credited.

No marks0/2

The connection will be more reliable because it has a bigger bandwidth.

Why: 'More reliable' is not credited on its own and 'bigger bandwidth' repeats the question, so no marks.

3Describe2 marksWired Connections Swap Remove

A video production company stores large video files on a server. The server is connected to the office switch by an Ethernet cable with a bandwidth of 1 Gbps.

Describe how the bandwidth of this wired connection affects the performance of the network.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Bandwidth is the maximum amount/capacity of data that can be carried each second (1) so a higher bandwidth lets editors open the large video files from the server in less time (1)
  • The bandwidth of the cable is set by the type/standard of cable used (1) so it limits how much of a large file can be sent in a given time (1)
  • A higher bandwidth means the cable can be shared between more transfers at the same time (1) so several editors can open files from the server at once without their transfers slowing down (1)
  • If the bandwidth is too low for the size of the files (1) the transfers take a long time and the editors have to wait for their files to open (1)

Allow 'capacity' for 'maximum amount of data'.

A description that only defines bandwidth earns a maximum of one mark.

Do not accept responses about the time a signal takes to travel (latency) or the distance a signal can reach (range).

Do not accept answers that say bandwidth is how fast the signal/data travels along the cable, that a higher bandwidth gives a faster internet connection, or that bandwidth is the number of cables in the network.

Example answers and how they were marked
Full marks2/2

Bandwidth is the maximum amount of data that can be carried along the cable each second, so a higher bandwidth means the editors can open the large video files from the server in less time.

Why: Point defining bandwidth as the maximum data per second (1) linked to the effect on opening the large files (1).

Some marks1/2

It is the amount of data that can be carried along the cable each second.

Why: Gives the first part of a linked pair (1) but does not develop it to say how performance is affected, so it is capped at one mark.

No marks0/2

A higher bandwidth means the signal travels faster along the cable, so the data reaches the server sooner and the delay is shorter.

Why: Treats bandwidth as transmission speed/latency, which the mark scheme says is not accepted, so no mark is earned.

4Describe2 marksWired Connections Swap Remove

A farm uses wired connections to link sensors in its fields to a computer in the farmhouse.

Describe how the range of a wired connection can affect the performance of this network.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • (Twisted pair/copper) cable only carries data over a limited distance (about 100 metres) (1) so sensors further away need another switch/device to pass the data on to the farmhouse (1)
  • Fibre optic cable can carry data over much longer distances (1) so wired connections can reach sensors across the whole farm (1)
  • Data sent further than the cable's range is not received (1) so the computer in the farmhouse does not get readings from those sensors (1)
  • A wireless connection can reach sensors that are out of range of the cables (1) so a mix of the two can give readings across the whole site (1)

Allow responses about signal weakening/being lost over a long cable.

Do not accept responses about bandwidth or speed, as range is about distance, not the amount or rate of data.

Example answers and how they were marked
Full marks2/2

Twisted pair copper cable only carries data for about 100 metres (1) so a switch is needed in each field to pass the readings on to the farmhouse (1).

Why: Point that copper cable has a limited distance (1) linked to needing another device to extend the network (1).

Some marks1/2

Fibre optic cable can carry data much further than copper cable.

Why: Gives the first point of a linked pair (1) but does not develop it to say what this allows the farm to do.

No marks0/2

A longer cable gives the network a bigger bandwidth so the sensors work faster.

Why: About bandwidth and speed rather than range, which the mark scheme says is not accepted.

5Explain2 marksPacket Switching Swap Remove

A router connects a home network to the internet.

Explain how a router uses the destination IP address in a packet header.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The router reads the destination IP address (1) so it knows which network/device the packet is for (1)
  • The router looks up the destination IP address in its routing table (1) to find the next router/route for the packet (1)
  • The router forwards the packet to the next router (1) that leads towards that IP address / is on the best route (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept MAC address - routers use the IP address to route packets between networks.

Do not accept 'it finds the exact device' without saying how the router uses the address, e.g. routing table/next router.

Example answers and how they were marked
Full marks2/2

The router looks up the destination IP address in its routing table to find the next router to send the packet to.

Why: Linked point (1) and reason (1): looks up the destination IP address in the routing table to find the next router.

Some marks1/2

It reads the destination IP address.

Why: Reads the destination IP address (1) but gives no linked reason about a routing table or next router.

No marks0/2

It reads the MAC address so it knows which computer sent the packet.

Why: Routers use the IP address to route packets, not the MAC address; no creditworthy point.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 45
Data Protection Act 17 questions Impact of AI 16 questions Intellectual Property 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.