Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

3 questions · 6 marks

Pick again
Print
1Short recall2 marksAddressing Swap Remove

The internet is a global network of networks.

Define the term IP address.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • A unique identifier/number (1)
  • Given to a device on a network/the internet (1)
  • Used to send/receive/route data (to the correct destination) (1)

Allow computer/laptop/phone/printer etc. for device.

Do not accept a website address/domain name.

Do not accept MAC address (this is a hardware identifier set by the manufacturer, not an address given to a device for use on a network).

Do not accept 'an address'/'a location' on its own, without saying that it identifies a device on a network/the internet.

Example answers and how they were marked
Full marks2/2

A unique number given to a device on the internet so that data can be sent to it.

Why: Unique identifier (1) and given to a device on the internet (1); the third creditworthy point is not needed for full marks.

Some marks1/2

A unique number.

Why: Gives a unique identifier (1) but does not say what it is given to or what it is used for.

No marks0/2

The address of a website, such as google.co.uk.

Why: Describes a domain name/website address, not an IP address; the Do not accept line applies.

2Describe2 marksWired Connections Swap Remove

A hospital connects the computers on a ward using wired connections.

Describe how using wired connections can reduce latency on this network.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Data travels along the cable directly to the switch on a single continuous path (1) so the time between sending and receiving the data is short (1)
  • A cable is not affected by interference from other devices/wireless traffic nearby (1) so packets are not lost and resent, which would add to the delay (1)
  • The switch sends the data only to the port of the correct device, not to every device (1) so the data spends less time travelling and the delay is lower (1)
  • Fewer devices share a cable than share a wireless channel (1) so packets do not queue/wait before they are sent (1)

The first mark is for the way the wired connection carries the data; the second mark is for how this reduces the delay between sending and receiving.

Do not accept responses about bandwidth or the amount of data a cable can carry, as latency is the delay between sending and receiving.

Do not accept responses that confuse latency with speed/bandwidth, e.g. 'a wired connection is faster so there is less latency', unless they describe how the delay is reduced.

Do not accept answers that only say a wired connection is faster, with no link to the delay.

Example answers and how they were marked
Full marks2/2

The cable is not affected by interference from other devices so packets do not need to be resent and the delay stays low.

Why: First mark for the cable being free of interference (1); linked development that no packets are resent and so the delay is lower (1).

Some marks1/2

There is no interference from other devices on a cable.

Why: Gives the first point of a linked pair (1) but does not say how this reduces the delay between sending and receiving.

No marks0/2

Wired connections have a higher bandwidth so there is less latency.

Why: Confuses bandwidth with latency, which the 'Do not accept' lines rule out (0).

3Describe2 marksWireless Connections Swap Remove

A network can use wired connections or wireless connections.

Describe why a wireless connection can have a higher latency than a wired connection.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Interference from other devices corrupts the wireless signal (1) so the data has to be resent, which increases the delay (1)
  • Devices on a wireless network take turns to use the same channel/frequency (1) so a device may have to wait for the channel to be free before it can transmit, which adds to the delay (1)
  • Data on a wireless connection must pass through the access point to reach the wired network (1) so the extra processing/conversion at the access point adds a delay (1)

Do not accept responses that only state that a wireless connection is slower/less reliable than a wired connection, without explaining how this adds latency.

Do not accept 'data is sent through the air' on its own, as this does not explain why latency is higher.

Do not accept responses about bandwidth or speed on their own.

Example answers and how they were marked
Full marks2/2

Interference from other devices can corrupt the wireless signal, so the data has to be resent, which increases the delay.

Why: Linked point: interference corrupts the signal (1), developed by the delay caused by resending the data (1).

Some marks1/2

Wireless signals can be corrupted by interference from other devices.

Why: The point that interference corrupts the wireless signal (1) is given, but there is no development of how this leads to a delay.

No marks0/2

Wireless is slower than a wired connection, so it has a higher latency.

Why: Only states that wireless is slower, without explaining how this adds latency, so it is not accepted.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.