Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

3 questions · 6 marks

Pick again
Print
1Short recall2 marksAddressing Swap Remove

The internet is a global network of networks.

Define the term IP address.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • A unique identifier/number (1)
  • Given to a device on a network/the internet (1)
  • Used to send/receive/route data (to the correct destination) (1)

Allow computer/laptop/phone/printer etc. for device.

Do not accept a website address/domain name.

Do not accept MAC address (this is a hardware identifier set by the manufacturer, not an address given to a device for use on a network).

Do not accept 'an address'/'a location' on its own, without saying that it identifies a device on a network/the internet.

Example answers and how they were marked
Full marks2/2

A unique number given to a device on the internet so that data can be sent to it.

Why: Unique identifier (1) and given to a device on the internet (1); the third creditworthy point is not needed for full marks.

Some marks1/2

A unique number.

Why: Gives a unique identifier (1) but does not say what it is given to or what it is used for.

No marks0/2

The address of a website, such as google.co.uk.

Why: Describes a domain name/website address, not an IP address; the Do not accept line applies.

2Explain2 marksThe Internet Swap Remove

A home network is connected to the internet by a router.

Explain one reason why a home network uses a router to connect its devices to the internet.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • All the devices can share one internet connection (1) because the router forwards data packets between the home network and the internet (1)
  • Data can reach the correct device on the home network (1) because the router uses the destination IP address to forward each packet to that device (1)
  • Each device does not need its own separate connection to the internet (1) because the router forwards data packets for all the devices between the home network and the internet (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it provides Wi-Fi' because Wi-Fi is not why a router is needed to connect to the internet.

Do not accept 'it connects the home network/devices to the internet' or 'a router connects networks' without saying what the router does with the data, as this restates the question.

Do not accept 'it connects the cables' without saying what it does with the data.

Example answers and how they were marked
Full marks2/2

It lets all the devices share the internet connection because it forwards their data packets between the home network and the internet.

Why: Linked point (1) and reason (1): the router forwards data packets between the home network and the internet.

Some marks1/2

All the devices can share one internet connection because it connects the home network to the internet.

Why: Point (1) for sharing one internet connection, but the reason only restates that it connects the network to the internet, which the scheme does not accept.

No marks0/2

It provides Wi-Fi for the devices.

Why: Wi-Fi is not why a router is needed to connect to the internet; do not accept.

3Explain2 marksWireless Connections Swap Remove

An office wireless network is near a microwave oven and several other wireless networks.

Explain how interference can affect the speed of a wireless network.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The speed of data transfer is reduced/is slower (1) because interference corrupts the radio signal, so data/packets are lost and have to be resent/retransmitted (1)
  • The network speed is lower (1) because there is more noise on the wireless signal, so data is sent at a lower transmission rate (1)
  • The throughput of the wireless network is reduced (1) because time is used resending corrupted data/packets instead of sending new data (1)

For both marks, the expansion must follow/associate with the statement.

Award 1 mark for a statement that the speed/transfer rate is reduced (e.g. slower, takes longer), even if no reason is given.

Do not accept 'interference damages/corrupts the radio signal' or 'the signal is weaker' on its own without a link to the speed.

Do not accept 'data is lost' on its own without saying how this reduces the speed.

Do not accept 'interference increases the bandwidth' or 'interference makes the signal stronger'.

Example answers and how they were marked
Full marks2/2

Interference corrupts the radio signal, so packets are lost and resent, which makes the data transfer slower.

Why: Linked point (1): data transfer is slower; reason (1): interference corrupts the signal so packets are lost and resent.

Some marks1/2

The speed of the wireless network will be lower.

Why: Point only (1): states the effect on speed. No linked reason why interference causes this.

No marks0/2

Interference increases the bandwidth, so the data travels faster.

Why: Misconception that interference increases bandwidth; the mark scheme says not to accept this.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.