Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 631 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 9 marks

Pick again
Print
1Short recall1 markPrimary Memory Swap Remove

Computers use RAM to store the data and instructions that are in use.

Name the term used to describe memory that loses its contents when the power is switched off.

[1 mark]
Mark scheme

Award one mark for:

  • Volatile (1)

Allow volatile memory / it is volatile.

Do not accept non-volatile, ROM, RAM or temporary/short term memory on their own, as these are not the term asked for.

Example answers and how they were marked
Full marks1/1

Volatile

Why: Correct term for memory that loses its contents when the power is switched off (1).

No marks0/1

Temporary memory

Why: Describes what such memory does but is not the term asked for; 'temporary memory' is on the Do not accept line, so no mark.

No marks0/1

Non-volatile

Why: Non-volatile memory keeps its contents when the power is switched off, the opposite of what the question describes; it is explicitly not accepted.

2Short recall2 marksStored Program Computers Swap Remove

Computers use the von Neumann stored program concept.

Define the term stored program concept.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Program instructions are stored in main memory/RAM (1)
  • The data used by the program is stored in main memory/RAM (1)
  • The CPU fetches/reads instructions from main memory to execute them (1)
  • The program can be run without the instructions being input again (1)

Allow 'the program is stored in memory' for one mark.

Do not accept answers about programs being stored on secondary storage, such as a hard disk or USB memory stick.

Do not accept answers that only describe the von Neumann architecture (e.g. having a CPU and memory) without stating that instructions are stored in main memory.

Example answers and how they were marked
Full marks2/2

Both the program instructions and the data the program uses are held in the same main memory, and the CPU fetches these instructions from memory to execute them.

Why: Instructions stored in main memory (1) and the CPU fetches instructions from memory to execute them (1).

Some marks1/2

Program instructions are stored in main memory.

Why: Instructions stored in main memory (1). No second point about data being stored in the same memory or about the CPU fetching instructions.

No marks0/2

The program is saved on the hard disk so that it can be loaded into RAM when the user runs it.

Why: A near-miss about secondary storage, which the mark scheme says not to accept; the stored program concept is about instructions being held in main memory.

3Describe2 marksSecondary Memory Swap Remove

Computers use secondary storage.

Describe the role of secondary storage.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Stores programs (including the operating system) and data that are not currently in use (1) so that they can be loaded into RAM/main memory when needed (1)
  • Keeps files/programs/data when the power is turned off (1) which happens because it is non-volatile (1)
  • Stores files/data for backup or archiving (1) so that they can be recovered if the originals are lost/corrupted (1)

A correct role on its own earns one mark; the second mark requires a linked development.

Accept either order if both the role and the link are given.

Do not accept 'it is non-volatile' on its own, unless it is linked to keeping data when the power is turned off.

Do not accept answers that only name a storage type (magnetic, optical, solid state) without describing a role.

Do not accept responses that describe primary storage/RAM, e.g. storing the data/instructions the CPU is currently working on, or that secondary storage makes the computer run faster.

Example answers and how they were marked
Full marks2/2

Secondary storage stores programs and data that are not currently in use so that they can be loaded into RAM when they are needed.

Why: Role point (1) linked to loading into RAM when needed (1).

Some marks1/2

It stores files and programs that are not currently in use.

Why: Correct role on its own earns one mark (1); no linked development, so the second mark is not awarded.

No marks0/2

It holds the data and instructions the CPU is working on so the computer runs faster.

Why: Describes primary storage/RAM and a speed benefit, which the mark scheme does not accept; no role of secondary storage is given.

4Describe2 marksSecondary Memory Swap Remove

A computer uses a magnetic hard disk.

Describe how data is stored on a magnetic hard disk.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • A read/write head moves over the surface of the disk (1) to read/write data by detecting or changing the magnetic alignment of areas of the surface (1)
  • The head magnetises areas of the disk surface in different directions (1) so each area represents a binary 1 or 0 (1)
  • Data is stored on concentric circles called tracks (1) which are divided into sectors (1)

Allow one mark for tracks/concentric circles on their own.

For the second mark in the first two bullets, the response must refer to the magnetic alignment/charge being detected or changed, not just that the head reads/writes data.

Do not award a mark for 'it is magnetic' or 'it stores data in binary' with no description of how the data is stored.

Do not accept descriptions of optical storage (e.g. a laser, pits and lands) or solid state storage (e.g. electric charges in chips).

Example answers and how they were marked
Full marks2/2

The read/write head moves over the magnetic surface and magnetises areas of the disk to store the 1s and 0s.

Why: Head moves over the surface (1) and magnetises areas to represent 1s and 0s (1).

Some marks1/2

The data is stored on tracks on the disk.

Why: Tracks/concentric circles (1), but no development such as tracks divided into sectors.

No marks0/2

It is magnetic and saves the data in 1s and 0s.

Why: Near-miss: 'magnetic' alone and 'data in binary/1s and 0s' with no description of how data is stored, which the mark scheme does not award.

5Explain2 marksFetch Decode Execute Cycle Swap Remove

The CPU carries out the fetch-decode-execute cycle.

Explain one reason why the address bus is used in the fetch stage of the fetch-decode-execute cycle.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The address bus carries the address of the next instruction (1) so the CPU can locate/fetch it from main memory/RAM (1)
  • The address bus carries the address of the memory location to be read (1) so the instruction/data stored there can be located/accessed (1)
  • The CPU needs to know where the next instruction is stored (1) so the address bus sends the address to main memory/RAM (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'from the program counter/PC' as part of the point for one mark, e.g. the address bus carries the address from the program counter (1), but the second mark needs the destination or purpose (e.g. to locate/fetch the instruction in main memory/RAM).

Do not award the second mark for naming the program counter/PC alone.

Do not accept answers that say the address bus carries data/instructions from main memory to the CPU, as these travel on the data bus.

Do not accept answers that say the address bus stores the address.

Do not allow an answer that only restates that the address bus carries addresses without saying which address or why it is needed.

Example answers and how they were marked
Full marks2/2

The address bus carries the address of the next instruction from the program counter to main memory, so that the CPU can locate the instruction that is to be fetched.

Why: Linked point (1) and reason (1).

Some marks1/2

The address bus carries the address of the next instruction from the program counter.

Why: Point only (1); the second mark is not awarded because the destination/purpose of locating or fetching the instruction is missing.

No marks0/2

It carries the instruction from main memory back to the CPU so that it can be decoded.

Why: Misconception: instructions travel on the data bus, which the mark scheme's Do not accept line covers.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 45
Data Protection Act 17 questions Impact of AI 16 questions Intellectual Property 12 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.