Menu

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 11 marks

Pick again
Print
1Short recall1 markPrimary Memory Swap Remove

Computers use RAM to store the data and instructions that are in use.

Name the term used to describe memory that loses its contents when the power is switched off.

[1 mark]
Mark scheme

Award one mark for:

  • Volatile (1)

Allow volatile memory / it is volatile.

Do not accept non-volatile, ROM, RAM or temporary/short term memory on their own, as these are not the term asked for.

Example answers and how they were marked
Full marks1/1

Volatile

Why: Correct term for memory that loses its contents when the power is switched off (1).

No marks0/1

Temporary memory

Why: Describes what such memory does but is not the term asked for; 'temporary memory' is on the Do not accept line, so no mark.

No marks0/1

Non-volatile

Why: Non-volatile memory keeps its contents when the power is switched off, the opposite of what the question describes; it is explicitly not accepted.

2Short recall2 marksSecondary Memory Swap Remove

Computers have both primary storage and secondary storage.

Define the term secondary storage.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • (Storage that is) non-volatile / keeps its data when the power is turned off (1)
  • (Storage that is) used to store programs and data/files (for later use) (1)
  • (Storage that is) not directly accessible by the CPU / not directly accessed by the CPU (1)

Allow both the non-volatile point and the stores programs and data point from one sentence if each idea is clearly stated, e.g. 'non-volatile storage that holds programs and data'.

Allow accessed via the CPU / must be copied into RAM before the CPU can use it for the third point.

Do not accept volatile / loses its data when the power is turned off.

Do not accept a description of primary storage, such as RAM or ROM.

Do not accept capacity.

Do not accept an example device on its own (e.g. hard disk drive).

Example answers and how they were marked
Full marks2/2

Secondary storage is non-volatile, so it does not lose data when the power is turned off. It is used to store programs and data files for later use.

Why: Non-volatile / keeps data when the power is off (1) and used to store programs and data files (1), each idea clearly stated.

Some marks1/2

Secondary storage is used to store programs and data files.

Why: Stores programs and data/files (1), but nothing is said about it being non-volatile or not directly accessible by the CPU.

No marks0/2

Secondary storage is volatile memory that holds the data the CPU is using at the moment.

Why: Describes primary storage (RAM) and says it is volatile, which the mark scheme says not to accept, so no marks are awarded.

3Explain2 marksPrimary Memory Swap Remove

A computer follows the von Neumann stored program concept. A program's instructions are stored on secondary storage before the program is run.

Explain one reason why the instructions of a program must be held in RAM before they can be executed.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The CPU can only fetch/read instructions from main memory/RAM (1) so the instructions of a running program must be copied/loaded into RAM before they can be executed (1)
  • RAM is faster to access than secondary storage (1) so the instructions can be fetched quickly enough for the CPU to execute them (1)
  • The CPU needs the instructions in RAM to fetch and execute them (1) because the fetch-decode-execute cycle reads each instruction from main memory/RAM (1)
  • The address of the next instruction is sent to RAM on the address bus (1) so the instruction can be transferred to the CPU/registers for decoding/execution (1)

For both marks, the expansion must follow/associate with the statement.

Allow the point and reason in either order if they are linked.

Do not accept answers that only say the CPU needs instructions, or that RAM is faster, without linking this to fetching/executing the instructions.

Do not accept answers that only say RAM holds data and instructions without linking this to the fetch-decode-execute cycle.

Do not accept 'RAM is permanent/non-volatile storage, so the instructions are kept safe' - RAM is volatile.

The response does not need to name the address bus or the fetch stage for full marks; a linked reason that explains why instructions must be in RAM (for example, the CPU can only fetch from RAM, or RAM is faster than secondary storage) is enough.

Example answers and how they were marked
Full marks2/2

The CPU can only fetch instructions from main memory, so the instructions of a running program must be copied into RAM before they can be executed.

Why: Linked point (1) for the CPU only being able to fetch instructions from main memory/RAM, and reason (1) for instructions being copied into RAM before execution.

Some marks1/2

The CPU can only fetch instructions from main memory.

Why: Point (1) only; there is no linked reason that explains why this means the instructions must be held in RAM before execution, such as RAM being faster than secondary storage.

No marks0/2

Instructions are kept in RAM because RAM is permanent storage and does not lose the instructions when the power is turned off.

Why: Misconception: RAM is described as permanent/non-volatile, which the mark scheme's 'Do not accept' line rules out; no creditworthy linked point.

4Discuss6 marksEmbedded Systems Swap Remove

A technology company is developing a new fitness tracker. The tracker is worn on the wrist and monitors the wearer's heart rate, the number of steps taken and their sleep. It has a rechargeable battery and a touch screen.

Discuss the use of embedded systems in the fitness tracker.

Your answer should include:

  • what an embedded system is.
  • the functions embedded systems perform in the tracker.
  • why an embedded system is suitable for this device.
[6 marks]
Mark scheme

Indicative content

What an embedded system is

  • An embedded system is a computer system that forms part of a larger device, such as the fitness tracker.
  • It performs a single, dedicated or specific task rather than being a general purpose computer.
  • It is often built around a microcontroller, which contains the processor, RAM and ROM on a single chip.
  • Its software is held in ROM so the tracker can run its program as soon as it is switched on.

Functions in the tracker

  • Monitoring the heart rate using a sensor and processing the readings so that they can be displayed on the screen.
  • Counting steps using an accelerometer and using the count to calculate the distance walked or the calories burned.
  • Tracking sleep by monitoring the wearer's movement during the night.
  • Controlling the touch screen so that the user can move between displays.
  • Managing the battery, for example stopping the charging when the battery is full and saving power when the tracker is idle.
  • Sending the collected data to a smartphone using Bluetooth so that it can be viewed in an app. Accept any other specific function of the fitness tracker that an embedded system could control.

Why an embedded system is suitable for this device

  • It has low power consumption, so the battery lasts longer between charges, which matters for a device that is worn all day.
  • It is small and light, so it can be fitted into a wristband.
  • Its dedicated function means it does not need a full operating system, so it is reliable and does not need restarting.
  • The program is small and stored in ROM, so the tracker needs only a small amount of memory.
  • It can be optimised for its specific tasks, so it responds quickly to the readings from its sensors.
  • The low cost per unit keeps the tracker affordable for the customer.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover what an embedded system is, the functions it performs in the tracker and why it is suitable for the tracker.
  • Do not award installing new software/apps, functions the tracker does not perform (such as playing music) or 'it is like a phone'.
Example answers and how they were marked
Full marks6/6

An embedded system is a computer system that forms part of a larger device and performs a single, dedicated task. In the tracker it is built around a microcontroller, which has the processor, RAM and ROM on one chip, and its program is stored in ROM so it runs as soon as the tracker is switched on. The embedded system monitors the heart rate using a sensor and processes the readings before showing them on the screen. Another function counts the steps using an accelerometer and uses that count to work out the distance walked and the calories burned, and further functions monitor movement at night to track sleep and send the data to a smartphone by Bluetooth. The embedded system also controls the touch screen and manages the battery so that charging stops when it is full and power is saved when the tracker is idle. An embedded system is suitable because it has low power consumption, so the battery lasts longer between charges, which matters for a device that is worn all day and cannot be charged constantly. It is also small and light, so it fits into a wristband, and because it is dedicated to a few tasks it does not need a full operating system, so it is reliable and can be optimised to respond quickly to its sensors. Keeping the cost low also makes the tracker affordable for the customer.

Why: Comprehensive definition including the microcontroller and ROM (AO1), a range of functions each applied to the tracker (heart rate, steps, sleep, Bluetooth, touch screen, battery), and suitability points developed with reasons (low power for a device worn all day, small size for a wristband, dedicated design for reliability and quick response). Sustained lines of reasoning, all three bullets covered: Level 3 (5-6) clearly met.

Some marks2/6

An embedded system is a small computer inside a device. In a fitness tracker it can monitor your heart rate and count your steps. It is suitable because it is small and does not use much power.

Why: Basic independent points only: a basic definition, two functions and one basic suitability point, with no development and almost no application to the tracker (no explanation of why small size or low power matter). Level 1 (1-2 marks), upper end because there are several independent correct points, but no linkage or reasoning for Level 2.

No marks0/6

An embedded system is a computer that you can install apps on. The fitness tracker uses it to play music and send texts. It is suitable because it is like a phone.

Why: The definition is the opposite of an embedded system (it cannot install new software), the functions are ones the tracker does not perform and 'it is like a phone' is not a suitability point. No rewardable content: Level 0 (0 marks).

Questions by topic

More ways to revise Edexcel GCSE Computer Science (1CP2)

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.