Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 693 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

3 questions · 9 marks

Pick again
Print
1Short recall1 markPrimary Memory Swap Remove

Computers use RAM to store the data and instructions that are in use.

Name the term used to describe memory that loses its contents when the power is switched off.

[1 mark]
Mark scheme

Award one mark for:

  • Volatile (1)

Allow volatile memory / it is volatile.

Do not accept non-volatile, ROM, RAM or temporary/short term memory on their own, as these are not the term asked for.

Example answers and how they were marked
Full marks1/1

Volatile

Why: Correct term for memory that loses its contents when the power is switched off (1).

No marks0/1

Temporary memory

Why: Describes what such memory does but is not the term asked for; 'temporary memory' is on the Do not accept line, so no mark.

No marks0/1

Non-volatile

Why: Non-volatile memory keeps its contents when the power is switched off, the opposite of what the question describes; it is explicitly not accepted.

2Describe2 marksEmbedded Systems Swap Remove

A drone is controlled by an embedded system.

Describe the purpose of the embedded system in the drone.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • It controls the motors/rotors (1) so that the drone can take off, hover, turn and land (1)
  • It keeps the drone stable/level automatically (1) by taking readings from a sensor (accelerometer/gyroscope/GPS) (1)
  • It receives signals from the remote control (1) and changes the speed of the motors to steer the drone (1)
  • It monitors the battery level (1) and brings the drone back to the ground before the battery runs out (1)

The development must relate to the function given in the point.

Accept a named function that the embedded system controls, e.g. 'it keeps the drone level', as the first mark (1).

Award the second mark only when the development gives a specific outcome or detail of that function, e.g. 'so that the drone can take off, hover, turn and land' or 'by changing the motor speeds to keep it level'.

Do not award the second mark for a generic outcome such as 'so it works', 'so it can fly' or 'so the drone moves'.

A bare 'it controls the motors so it can fly' therefore earns the first mark only.

Allow any other specific function of a drone that is carried out by the embedded system.

Do not accept 'it flies the drone' / 'it is the drone's brain' / 'it makes the drone work' without a named function being controlled.

Do not accept answers that describe the user or the remote control flying the drone with no function carried out by the embedded system.

Example answers and how they were marked
Full marks2/2

It keeps the drone level while it is in the air by reading the accelerometer and changing the speed of the motors.

Why: Named function of the embedded system, keeping the drone level (1), developed with the sensor reading and motor speed changes that achieve it (1).

Some marks1/2

It controls the motors of the drone.

Why: First mark only (1) for naming a function the embedded system controls, with no linked outcome or detail to earn the second mark.

No marks0/2

It is the brain of the drone and makes the drone work.

Why: Vague phrase with no named function being controlled, which the mark scheme's 'Do not accept' line rules out.

3Discuss6 marksSecondary Memory Swap Remove

A school is buying new computers. Each computer needs storage for the operating system, applications and students' work. The computers have RAM and will be used in classrooms.

Discuss the role of secondary storage in these computers.

Your answer should include:

  • why secondary storage is needed
  • the difference between primary and secondary storage
  • a suitable type of secondary storage for the school's computers and a reason why it is suitable.
[6 marks]
Mark scheme

Indicative content

Why secondary storage is needed

  • Secondary storage is non-volatile, so it keeps the operating system, applications and students' work when the power is turned off.
  • It stores programs and files that are not currently in use, so they are not lost when the computer is switched off.
  • It provides a larger capacity than primary storage for files such as students' work, videos and photographs.
  • It allows each computer to keep many students' files and the software the school has installed.

The difference between primary and secondary storage

  • Primary storage (RAM) is volatile and directly accessible by the CPU; secondary storage is non-volatile and not directly accessible by the CPU.
  • RAM holds the data and instructions currently in use; secondary storage holds data and programs long term.
  • Primary storage is faster but smaller and more expensive per gigabyte; secondary storage is slower but larger and cheaper.
  • The school's computers need both: RAM to run the operating system and applications, and secondary storage to keep them when the computer is switched off.

A suitable type of secondary storage for the school's computers and a reason why it is suitable

  • A solid state drive (SSD) is suitable because it has no moving parts, so it is durable and quiet, and has fast read/write speeds, which helps the computers start up quickly.
  • A magnetic hard disk drive (HDD) is suitable because it is cheap and offers a very large capacity, which is useful for storing many students' files.
  • Either type could be used; a small SSD for the operating system and applications plus a large HDD for files would balance speed and cost.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Award credit for a type of secondary storage only when a reason is given that is linked to the school's computers; a named type alone (e.g. 'SSD') is not creditworthy. Do not accept RAM as secondary storage or the claim that secondary storage is the same as RAM. Do not accept CD/DVD/Blu-ray as the main storage for the school's computers because their capacity is too low and write speeds are slow.
  • For Level 3, the answer must cover all three bullets and apply at least one point to the school's computers. A 6-mark answer is well developed with sustained reasoning and a justified choice; a 5-mark answer covers all three but with limited development or application. Comparisons of speed and cost between primary and secondary storage are creditworthy as part of the difference.
Example answers and how they were marked
Full marks6/6

The school needs secondary storage because it is non-volatile, so the operating system, applications and students' work stay on the computer when the power is turned off. RAM is volatile and only holds data currently in use, while secondary storage keeps files long term. Secondary storage is also larger and cheaper per gigabyte than RAM, so it can hold many students' files. An SSD would be suitable because it has no moving parts, so it is durable in a classroom, and it has fast read/write speeds, so the computers start up quickly. A magnetic HDD would give a larger capacity for the same cost, which is useful for storing videos.

Why: Covers all three bullets: why secondary storage is needed (non-volatile, stores OS/apps/work, larger capacity), the difference from RAM (volatile, directly accessible, faster, smaller), and suitable types (SSD durable and fast; HDD cheap and high capacity) applied to the school's computers. Sustained and well structured. Level 3.

Some marks3/6

Secondary storage is needed to store data when the power is off. It is non-volatile, unlike RAM which is volatile. RAM is directly accessed by the CPU and is faster, but secondary storage is bigger. The school could use a hard disk because it has a lot of space.

Why: All three bullets covered with basic points: non-volatile storage when power off (1), difference volatile vs non-volatile (1), HDD with reason of capacity (1). Limited development and application to the school, so low Level 2, 3 marks.

Some marks1/6

Secondary storage is non-volatile so it keeps data when the power is off. It is the same as RAM, which is why it is fast. The school should use a CD because it is cheap and portable.

Why: One creditworthy basic point: non-volatile keeps data (1). Misconception that secondary storage is the same as RAM, and CD is not accepted as suitable main storage, so Level 1.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 71
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 18 questions

5.3 Cybersecurity

Build a paper on this topic 36
Malware 18 questions Social Engineering 18 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.