Edexcel GCSE Computer Science (1CP2) Exam Questions

• B The destination IP address (1)
• The only correct answer is B. The correct answer is the destination IP address.
• A is not correct because a domain name is converted to an IP address by a DNS server before routing begins
• C is not correct because the sender's MAC address is only used to deliver the packet on the local network
• D is not correct because the file name is not used to route packets

Award one mark for:

• Router (1)

Allow routers (plural).

Allow minor spelling errors that are clearly router, e.g. rooter.

Do not accept switch, hub (these forward data within a network, not between networks), modem or server.

Do not accept gateway on its own.

Award one mark for:

• 164 (1)

Award one mark for any of the following up to a maximum of two marks:

• (Only) 128 different characters can be represented / 7 bits give 2^7 = 128 different codes (1)
• It cannot represent characters from languages other than English / non-English alphabets, e.g. Greek, Chinese (1)
• It cannot represent accented characters, e.g. é, ñ (1)
• It cannot represent symbols or emoji that are not in the ASCII character set (1)

Award a maximum of one mark for the last three bullets, as they are all examples of characters that fall outside the 128 ASCII codes.

Allow 'it can only represent 128 characters, so some characters are missing' for the first bullet.

Do not accept 'it uses 7 bits' / 'it only uses 7 bits' on its own, without saying what this limits.

Do not accept 'it can only store a limited amount of text' / 'it can only store short messages', as 7 bits limits the number of characters available, not the length of a message.

Do not accept 'it can only represent the characters in the ASCII character set', as this repeats the question.

Do not accept 'it is old/out of date' or 'it cannot store numbers'.

Award one mark for any of the following up to a maximum of two marks:

• Reduces/makes the size of a file smaller (1)
• No data is lost/removed (during compression) (1)
• The original file/data can be recreated/restored exactly (1)

Allow 'the compressed file takes up less storage space' for the first mark.

The second and third bullets are two ways of making the same point: award a maximum of one mark for them, so a response that says no data is lost and that the original file can be restored, but does not say the file is smaller, scores one mark.

Do not accept descriptions of lossy compression, e.g. 'it removes data that is not needed to make the file smaller'.

Ignore reference to download/transmission times, bandwidth and streaming, as these are benefits of compression and not part of the definition.

Award up to two marks for a linked description such as:

• The user enters a username/user ID and password/PIN (1) which is compared with the account details the operating system has stored (1)
• The operating system keeps a file/list/database of users and their passwords (1) to check the login details the user enters against (1)
• The operating system compares the entered details with the details stored for that user (1) and if they do not match, access is refused/denied (1)
• The entered details are checked against the access rights stored for that user (1) so access is only allowed when the details are correct (1)

Do not award for 'it asks for a password' on its own, without saying what the password is checked against.

A stored list/file of users and passwords with no check of the login details earns one mark only.

Do not accept responses about file management, such as finding or opening the user's files.

Award up to two marks for a linked description such as:

• The processor/CPU can only execute machine code/binary instructions (1) so the assembly instructions must be converted into machine code before the program can run (1)
• Each assembly instruction/mnemonic matches/corresponds to one machine code instruction (1) so each line must be replaced with the machine code the processor executes (1)
• The program is written using mnemonics (1) that must be translated into machine code for the processor to carry out the instructions (1)
• The hardware/processor does not understand assembly language directly (1) so it must be translated into machine code that the processor can execute (1)

Do not accept 'assembly language is a low-level language'.

Do not accept 'it is hard to understand' or 'it is not English'.

Do not accept benefits, such as 'machine code runs faster' or 'the program will run more quickly'.

Do not accept 'an assembler/a translator converts it' on its own, with no reference to the processor only being able to execute machine code/binary.

Do not accept responses about high-level languages or about compilers/interpreters.

Award one mark for each correct nibble in the correct order:

• 1100 (1)
• 0111 (1)

0 marks if the response is not 8-bit binary.

Indicative content

What embedded systems are used for in the drone

• An embedded system is a computer built into a larger device that performs a single, dedicated function as part of that device.
• The drone contains several embedded systems, and each one is dedicated to a task such as flight control, navigation, obstacle detection or battery monitoring rather than being a general-purpose computer.
• The flight controller embedded system processes data from the drone's sensors and changes the signals sent to the rotors, so the drone stays stable and can be steered while carrying a parcel.
• The GPS receiver embedded system works out the drone's position and uses it to navigate along the route to the customer's address.
• The camera embedded system captures images or video that are processed to detect obstacles, such as trees, buildings or overhead cables, in the drone's path.
• Sensor embedded systems, for example ultrasonic or infrared sensors, measure the distance to the ground and to obstacles so the drone can land and avoid collisions.
• The battery management and communication embedded systems monitor the charge and send the drone's status and location to the control centre, and the rotor-control embedded systems drive the rotors so the drone can take off, hover and land.

Benefits of using embedded systems in the drone

• Embedded systems use little power, so the drone can fly for longer and deliver more parcels on one charge.
• They are small and light, which is important because a heavier drone needs more power to stay in the air.
• Because each embedded system is dedicated to one task, it can respond quickly and reliably, so the drone can change direction in time to avoid an obstacle.
• Combining the processor, memory and input/output in one unit reduces the number of separate components and the cost per drone, so a fleet of delivery drones is cheaper to build.
• Embedded systems allow the drone to fly autonomously, so the company does not need a human pilot for every delivery.
• Programs are held in ROM, so the drone's behaviour is consistent and predictable each time it flies.

Any drawbacks or limitations of using embedded systems in the drone

• Each embedded system has limited processing power, so the drone may not be able to run complex obstacle-recognition software and could fail to identify an unusual obstacle.
• They have limited storage and RAM, so the drone cannot store much flight data or video on board and must send it to the control centre.
• The software is held in ROM and is difficult to update, so fixing a bug or adding a new feature may mean returning the drone or connecting it to a computer.
• The embedded systems are dedicated to the drone, so they cannot easily be reused for a different task if the drone is retired.
• If an embedded system fails, the drone may crash, which could injure people or damage property, so robustness is essential.
• A general-purpose computer would be too large and heavy for the drone, so the drone has to use these limited dedicated systems and cannot run general-purpose software.

Levels

• Level 0 (0 marks): No rewardable content.
• Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
• Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
• Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

• Level 3 responses must cover what embedded systems are used for in the drone and both benefits and drawbacks/limitations, with reasoning applied to the delivery drone. Do not accept general-purpose computer uses such as connecting to Wi-Fi to play videos, installing new software, apps or games, or using a server; do not accept the drone itself as a single embedded system unless a specific dedicated function is explained.
• A definition of an embedded system on its own, with no application to the drone, cannot lift an answer above Level 1; limited storage and inability to be repurposed must be linked to the drone, for example little flight data can be stored or the system cannot be reused for another task, to gain credit.