Edexcel GCSE Computer Science (1CP2) exam questions

Build a practice paper from 514 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Practice paper

9 questions · 15 marks

Pick again

1Multiple choice1 markAddressing Swap Remove

Every device that connects to the internet is given an IP address.

Identify the number of bits in an IPv4 address.

[1 mark]

A4
B8
C32
D128

Mark scheme

C 32 (1)
The only correct answer is C. The correct answer is 32.
A is not correct because 4 is the number of groups of numbers in an IPv4 address
B is not correct because 8 is the number of bits in each group of an IPv4 address
D is not correct because 128 is the number of bits in an IPv6 address

Example answers and how they were marked

Full marks1/1

C 32

Why: Correct option (1): an IPv4 address is 32 bits long.

No marks0/1

B 8

Why: 8 is the number of bits in one group of an IPv4 address, not the whole address (mark scheme line B), so no mark.

No marks0/1

D 128

Why: 128 is the length of an IPv6 address, not an IPv4 address (mark scheme line D), so no mark.

2Short recall1 markAddressing Swap Remove

Routers forward data packets across the internet.

State the part of a data packet that a router uses to decide where to send it.

[1 mark]

Mark scheme

Award one mark for:

(Destination) IP address (1)

Allow IP address on its own (the destination is implied).

Do not accept source IP address/IP address of the sender.

Do not accept MAC address.

Do not accept domain name/web address.

Example answers and how they were marked

Full marks1/1

The destination IP address.

Why: Names the destination IP address (1).

No marks0/1

The domain name.

Why: A domain name is not used by a router to route a packet; it must be translated to an IP address first, so no mark.

No marks0/1

The MAC address.

Why: A MAC address is not used to route packets across the internet; the Do not accept line applies.

3Short recall1 markWired Connections Swap Remove

Wired connections have characteristics that affect network performance.

State what is meant by the range of a wired network connection.

[1 mark]

Mark scheme

Award one mark for:

The maximum distance data/a signal can be transmitted before it becomes too weak to be received (1)

Allow 'how far a signal can travel'.

Do not accept the number of devices that can be connected to the network.

Do not accept the speed at which data is transmitted.

Do not accept bandwidth/the maximum capacity of a channel.

Do not accept latency/the delay between a signal being sent and received.

Example answers and how they were marked

Full marks1/1

The maximum distance a signal can be transmitted before it becomes too weak to be received.

Why: Gives the maximum distance a signal can be transmitted before it becomes too weak, which is the creditworthy point (1).

No marks0/1

The maximum capacity of the connection.

Why: This describes bandwidth, which the mark scheme says not to accept for range, so no mark.

No marks0/1

The delay between a signal being sent and received.

Why: This describes latency/delay, which the mark scheme says not to accept for range, so no mark.

4Short recall2 marksWired Connections Swap Remove

A company can choose between two wired connections. Connection B has a higher bandwidth than connection A.

Give two benefits to the company of choosing connection B.

[2 marks]

Mark scheme

Award one mark for any of the following up to a maximum of two marks:

Files/data download/upload more quickly (1)
More employees can use the connection at the same time without it slowing down (1)
Web pages/streamed video load more quickly with less buffering (1)
Video calls/conferencing run at a higher quality (1)
Updates/backups can be completed in less time (1)

Allow 'multiple users' or 'more devices' for the shared-use point

Allow 'video streams more quickly' or 'less buffering' on their own

Do not accept lower latency, as a higher bandwidth does not reduce latency

Do not accept 'more data can be transferred per second' or 'a bigger bandwidth', as these repeat what bandwidth is

Do not accept 'more reliable' on its own, as a higher bandwidth does not make a wired connection more reliable

Example answers and how they were marked

Full marks2/2

Files will download more quickly, and more employees can use the internet at the same time without the connection slowing down.

Why: Files download more quickly (1) and more users without slowdown (1).

Some marks1/2

Web pages will load faster and the connection will have a longer range.

Why: Web pages load faster (1); the range of a connection is not increased by bandwidth, so that point is not credited.

No marks0/2

The connection will be more reliable because it has a bigger bandwidth.

Why: 'More reliable' is not credited on its own and 'bigger bandwidth' repeats the question, so no marks.

5Describe2 marksWired Connections Swap Remove

A school connects its desktop computers to the network using Ethernet cables.

Describe one way that using a wired connection can give a faster transfer of data than a wireless connection.

[2 marks]

Mark scheme

Award up to two marks for a linked description such as:

(Ethernet) cables are not affected by interference from other devices (1) so data is transferred at a consistent/steady speed (1)
Each device has its own cable to the switch (1) so the full bandwidth is available to that device and speeds do not drop as more users join (1)
Fibre optic cable has a higher bandwidth than a wireless link (1) so more data can be sent along the cable each second (1)
The cable gives a direct/physical path to the switch (1) so data is less likely to be lost and resent, which would slow the transfer (1)

Do not accept responses about security, reliability or users being unable to move around, as these are not about speed.

Do not accept answers that only say a wired/cable connection is faster, or that fibre is faster, without saying why.

Example answers and how they were marked

Full marks2/2

The cable is not affected by interference from other devices such as other networks or microwaves (1) so the data is sent at a steady speed instead of slowing down (1).

Why: Point that the cable is not affected by interference (1) linked to a consistent data transfer speed (1).

Some marks1/2

Ethernet cables are not affected by interference.

Why: Gives the first point of a linked pair (1) but does not develop it to say how this makes the transfer faster.

No marks0/2

A wired connection is faster because the data travels down a cable and not through the air.

Why: Repeats the question (wired is faster) with no reason, which the mark scheme's final line says is not accepted.

6Describe2 marksWired Connections Swap Remove

A farm uses wired connections to link sensors in its fields to a computer in the farmhouse.

Describe how the range of a wired connection can affect the performance of this network.

[2 marks]

Mark scheme

Award up to two marks for a linked description such as:

(Twisted pair/copper) cable only carries data over a limited distance (about 100 metres) (1) so sensors further away need another switch/device to pass the data on to the farmhouse (1)
Fibre optic cable can carry data over much longer distances (1) so wired connections can reach sensors across the whole farm (1)
Data sent further than the cable's range is not received (1) so the computer in the farmhouse does not get readings from those sensors (1)
A wireless connection can reach sensors that are out of range of the cables (1) so a mix of the two can give readings across the whole site (1)

Allow responses about signal weakening/being lost over a long cable.

Do not accept responses about bandwidth or speed, as range is about distance, not the amount or rate of data.

Example answers and how they were marked

Full marks2/2

Twisted pair copper cable only carries data for about 100 metres (1) so a switch is needed in each field to pass the readings on to the farmhouse (1).

Why: Point that copper cable has a limited distance (1) linked to needing another device to extend the network (1).

Some marks1/2

Fibre optic cable can carry data much further than copper cable.

Why: Gives the first point of a linked pair (1) but does not develop it to say what this allows the farm to do.

No marks0/2

A longer cable gives the network a bigger bandwidth so the sensors work faster.

Why: About bandwidth and speed rather than range, which the mark scheme says is not accepted.

7Explain2 marksPacket Switching Swap Remove

Data is split into packets before it is sent across the internet.

Explain why each packet has a packet number in its header.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

The receiver can put the packets back into the correct order (1) because packets may arrive out of order/take different routes (1)
The receiver can see if a packet is missing (1) because the sequence of numbers shows a gap (1)
The receiver knows when the whole file has arrived (1) because the total number of packets/last packet number is known (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'so the packets can be put back in the correct order/reassembled' for the first mark, but the second mark needs the reason, i.e. packets may arrive out of order/take different routes.

Do not accept 'so the packets can be identified' without stating what the number is used for, e.g. reordering or spotting a missing packet.

Do not accept 'so the router knows where to send it' - the router uses the destination IP address, not the packet number.

Example answers and how they were marked

Full marks2/2

The receiver can put the packets back in the correct order because they may arrive out of order.

Why: Linked point (1) and reason (1): the packet number allows reordering because packets can arrive out of order.

Some marks1/2

It shows the receiver the order of the packets.

Why: The point is given (1) but there is no linked reason, such as packets arriving out of order.

No marks0/2

So the router knows which route to use.

Why: Routers use the destination IP address, not the packet number, so this earns nothing; it is named in the mark scheme as a 'Do not accept'.

8Explain2 marksProtocols & Layers Swap Remove

The TCP/IP model has four layers.

Explain one function of the transport layer when a file is sent over a network.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

Splits the data/file into packets (1) so each packet can be sent separately across the network (1)
Adds a packet/sequence number to each packet (1) so the packets can be put back into the correct order at the destination (1)
Detects lost/missing packets (1) so they can be requested/resent (1)
Creates a connection between the two computers/hosts (1) before the file is sent (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'segments' for 'packets' (TCP divides the data into segments, which become packets at the internet layer).

Do not accept 'sends the data/file' on its own without saying what the transport layer does to the data.

Do not accept naming TCP or a port number on its own without expansion.

Do not accept routing/addressing packets using IP addresses, which is the internet layer.

Example answers and how they were marked

Full marks2/2

The transport layer splits the data into packets (1) so each packet can be sent separately across the network (1).

Why: Linked point (1) and reason (1): splitting into packets lets each one be sent separately.

Some marks1/2

It splits the data into packets (1).

Why: Point (1) identified, but no linked reason given, so only the first mark is awarded.

No marks0/2

It routes the packets using IP addresses (0) so they reach the right destination.

Why: Routing using IP addresses is the internet layer, not the transport layer, so no credit is given.

9Explain2 marksWired Connections Swap Remove

Latency is the delay between data being sent and received. A player of online games uses a wired Ethernet connection instead of a wireless connection.

Explain one reason why the wired connection can have a lower latency.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

The cable provides a direct physical path to the switch/router (1) so data does not have to travel through the air where it can be delayed by obstacles such as walls (1)
The cable is not shared with other wireless devices (1) so data does not have to wait for a free channel before it is sent (1)
The data travels straight along the cable to the switch (1) so the time taken for it to reach its destination is short (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'the wired connection is faster' on its own without saying why the delay between sending and receiving is shorter.

Do not accept a definition of latency without a reason.

Example answers and how they were marked

Full marks2/2

The cable gives the computer a direct physical path to the switch, so the data does not have to travel through the air where it could be delayed by obstacles.

Why: Gives the point of a direct physical path (1) and links it to data not being delayed by obstacles in the air (1).

Some marks1/2

The wired connection gives a direct path, so it is quicker.

Why: Gives the point about the direct path (1) but 'quicker' only restates lower latency and does not explain why the delay is shorter.

No marks0/2

Wired connections have lower latency because the internet speed is faster.

Why: Confuses speed with latency; no reason is given for a shorter delay, and 'faster' on its own is not accepted.

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a paper

Practice paper

Questions by topic

2.1 Binary

2.2 Data representation

2.3 Data storage and compression

3.1 Hardware

3.2 Software

3.3 Programming languages

4.1 Networks

More ways to revise Edexcel GCSE Computer Science (1CP2)