Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Multiple choice1 markAddressing Swap Remove

Data is sent across the internet in packets.

Identify the device that uses IP addresses to forward packets from one network to another.

[1 mark]
  • AHub
  • BNetwork interface card
  • CRouter
  • DSwitch
Mark scheme
  • C Router (1)
  • The only correct answer is C. The correct answer is router.
  • A is not correct because a hub sends data to every device on the network
  • B is not correct because a network interface card connects a device to a network
  • D is not correct because a switch forwards data within a single network using MAC addresses
Example answers and how they were marked
Full marks1/1

C Router

Why: Correct option (1): a router uses IP addresses to forward packets between networks.

No marks0/1

D Switch

Why: A switch forwards data within one network using MAC addresses, not between networks (mark scheme line D), so no mark.

No marks0/1

A Hub

Why: A hub only sends data to every device on the network (mark scheme line A), so no mark.

2Describe2 marksWired Connections Swap Remove

A school connects its desktop computers to the network using Ethernet cables.

Describe one way that using a wired connection can give a faster transfer of data than a wireless connection.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • (Ethernet) cables are not affected by interference from other devices (1) so data is transferred at a consistent/steady speed (1)
  • Each device has its own cable to the switch (1) so the full bandwidth is available to that device and speeds do not drop as more users join (1)
  • Fibre optic cable has a higher bandwidth than a wireless link (1) so more data can be sent along the cable each second (1)
  • The cable gives a direct/physical path to the switch (1) so data is less likely to be lost and resent, which would slow the transfer (1)

Do not accept responses about security, reliability or users being unable to move around, as these are not about speed.

Do not accept answers that only say a wired/cable connection is faster, or that fibre is faster, without saying why.

Example answers and how they were marked
Full marks2/2

The cable is not affected by interference from other devices such as other networks or microwaves so the data is sent at a steady speed instead of slowing down.

Why: Point that the cable is not affected by interference (1) linked to a consistent data transfer speed (1).

Some marks1/2

Ethernet cables are not affected by interference.

Why: Gives the first point of a linked pair (1) but does not develop it to say how this makes the transfer faster.

No marks0/2

A wired connection is faster because the data travels down a cable and not through the air.

Why: Repeats the question (wired is faster) with no reason, which the mark scheme's final line says is not accepted.

3Explain2 marksPacket Switching Swap Remove

A router connects a home network to the internet.

Explain how a router uses the destination IP address in a packet header.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The router reads the destination IP address (1) so it knows which network/device the packet is for (1)
  • The router looks up the destination IP address in its routing table (1) to find the next router/route for the packet (1)
  • The router forwards the packet to the next router (1) that leads towards that IP address / is on the best route (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept MAC address - routers use the IP address to route packets between networks.

Do not accept 'it finds the exact device' without saying how the router uses the address, e.g. routing table/next router.

Example answers and how they were marked
Full marks2/2

The router looks up the destination IP address in its routing table to find the next router to send the packet to.

Why: Linked point (1) and reason (1): looks up the destination IP address in the routing table to find the next router.

Some marks1/2

It reads the destination IP address.

Why: Reads the destination IP address (1) but gives no linked reason about a routing table or next router.

No marks0/2

It reads the MAC address so it knows which computer sent the packet.

Why: Routers use the IP address to route packets, not the MAC address; no creditworthy point.

4Explain2 marksWireless Connections Swap Remove

A wireless access point has a limited bandwidth.

Explain why connecting more devices to the access point can reduce the speed each device gets.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • (All) devices share the bandwidth of the access point (1) so each device gets a smaller share, which reduces its speed/slows down transfers (1)
  • Bandwidth is the maximum amount of data that can be transferred at one time (1) so when devices send more data than this, the data must wait/queue, which slows down transfers (1)
  • (Many) devices send data at the same time (1) so the devices take turns, which reduces the amount of data each one can send/the speed each device gets (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'connection speed'/'download speed' for speed.

Do not accept 'the signal is shared' without saying that this reduces the bandwidth/data each device can send.

Do not accept the idea that adding devices increases the bandwidth.

Example answers and how they were marked
Full marks2/2

All the devices share the access point's bandwidth, so each device gets less bandwidth and its downloads take longer.

Why: Linked point (1): bandwidth is shared; reason (1): each device gets a smaller share, which reduces its speed/slows transfers.

Some marks1/2

The bandwidth is shared between all the devices.

Why: Point only (1): the bandwidth is shared. No linked reason about each device getting less bandwidth or a reduced speed.

No marks0/2

Adding more devices increases the bandwidth, so the network can send more data.

Why: Misconception that adding devices increases bandwidth; the mark scheme says not to accept this.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 65
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 12 questions

5.3 Cybersecurity

Malware 8 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.