Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 6 marks

Pick again
Print
1Multiple choice1 markAddressing Swap Remove

Data is sent across the internet in packets.

Identify the device that uses IP addresses to forward packets from one network to another.

[1 mark]
  • AHub
  • BNetwork interface card
  • CRouter
  • DSwitch
Mark scheme
  • C Router (1)
  • The only correct answer is C. The correct answer is router.
  • A is not correct because a hub sends data to every device on the network
  • B is not correct because a network interface card connects a device to a network
  • D is not correct because a switch forwards data within a single network using MAC addresses
Example answers and how they were marked
Full marks1/1

C Router

Why: Correct option (1): a router uses IP addresses to forward packets between networks.

No marks0/1

D Switch

Why: A switch forwards data within one network using MAC addresses, not between networks (mark scheme line D), so no mark.

No marks0/1

A Hub

Why: A hub only sends data to every device on the network (mark scheme line A), so no mark.

2Short recall1 markWired Connections Swap Remove

Wired connections have characteristics that affect network performance.

State what is meant by the range of a wired network connection.

[1 mark]
Mark scheme

Award one mark for:

  • The maximum distance data/a signal can be transmitted before it becomes too weak to be received (1)

Allow 'how far a signal can travel'.

Do not accept the number of devices that can be connected to the network.

Do not accept the speed at which data is transmitted.

Do not accept bandwidth/the maximum capacity of a channel.

Do not accept latency/the delay between a signal being sent and received.

Example answers and how they were marked
Full marks1/1

The maximum distance a signal can be transmitted before it becomes too weak to be received.

Why: Gives the maximum distance a signal can be transmitted before it becomes too weak, which is the creditworthy point (1).

No marks0/1

The maximum capacity of the connection.

Why: This describes bandwidth, which the mark scheme says not to accept for range, so no mark.

No marks0/1

The delay between a signal being sent and received.

Why: This describes latency/delay, which the mark scheme says not to accept for range, so no mark.

3Explain2 marksProtocols & Layers Swap Remove

Two computers exchange data over a network.

Explain why network protocols are needed for the two computers to communicate.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Devices (can) understand/interpret the data they receive (1) because they follow the same set of rules for communication (1)
  • Data is sent in an agreed format/structure (1) so the receiving device can interpret/understand it correctly (1)
  • Devices (can) connect/communicate successfully (1) because they agree how the data is transmitted, such as the type of signal used (1)
  • Errors (can) be detected/handled (1) because both devices follow the same rules for checking the data (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'so devices can talk/communicate with each other' or 'so they can understand each other' without saying they follow the same rules/agreed format.

Do not accept an answer that only states protocols are a set of rules, without saying what this allows (e.g. the data can be understood/interpreted).

Do not accept a faster connection/speed as a reason why protocols are needed.

Do not accept naming a protocol (e.g. TCP/IP, HTTP, Wi-Fi) without an explanation of why it is needed.

Do not accept a description of what a protocol does (e.g. 'TCP splits data into packets') without saying why this is needed.

Example answers and how they were marked
Full marks2/2

Devices can understand the data they receive because they follow the same set of rules for communication.

Why: Linked point (1) and reason (1): following the same rules is what lets the devices understand the data.

Some marks1/2

Data is sent in an agreed format.

Why: Point (1) identified, but no linked reason saying what the agreed format achieves.

No marks0/2

Protocols are needed so the connection is faster because more data can be sent at once.

Why: Speed is not a reason protocols are needed, so there is no creditworthy point or linked reason.

4Explain2 marksThe Internet Swap Remove

Each data packet has a header that contains the destination IP address.

Explain one reason why a data packet contains the destination IP address.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Routers can forward the packet towards its destination (1) because they read the destination IP address in the packet header (1)
  • The packet is delivered to the correct device (1) because the receiving device compares the destination IP address with its own IP address (1)
  • Each packet can take a different route (1) because routers use the destination IP address to choose the next router (1)
  • The packet can be passed on by each router in turn (1) because the destination IP address shows which network the packet is for (1)

For both marks, the expansion must follow/associate with the statement.

Statements such as 'so it reaches the right destination' or 'so routers know where to send it' earn the first mark only; do not award the second mark unless the reason says that the address is read from the packet header and used to forward the packet.

Do not accept 'so it knows where it came from' as this describes the source address, not the destination address.

Do not accept 'so it gets there faster' without a linked reason.

Example answers and how they were marked
Full marks2/2

Routers know where to send it because they use the address in the packet header to choose the next network.

Why: Linked point (1) and reason (1): routers read the destination IP address in the header to forward the packet.

Some marks1/2

So that it reaches the right destination because every packet has an address.

Why: First mark (1) for reaching the right destination, but the reason is circular and does not say the address is read and used to forward the packet.

No marks0/2

So the packet knows where it came from.

Why: Describes the source address, not the destination address; do not accept.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 65
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 12 questions

5.3 Cybersecurity

Malware 8 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.