Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 11 marks

Pick again
Print
1Short recall2 marksFetch Decode Execute Cycle Swap Remove

The control unit is one component of the CPU.

Give two roles of the control unit during the fetch-decode-execute cycle.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • Decodes the instruction / works out what the instruction is (1)
  • Sends control signals to the other components (of the CPU) (1)
  • Coordinates/controls the activities of the CPU (1)
  • Directs the timing of the other components / controls when each component acts (1)

Do not accept carrying out arithmetic or logical operations, as this is the role of the ALU.

Do not accept holding/storing the data or instructions, as this is the role of the registers/main memory.

Example answers and how they were marked
Full marks2/2

It decodes each instruction and sends control signals to the other components to tell them what to do.

Why: Decodes the instruction (1) and sends control signals to the other components (1).

Some marks1/2

It decodes the instructions and carries out the calculations.

Why: Decoding the instruction (1); the calculations are carried out by the ALU, so the second part earns nothing.

No marks0/2

It stores the data that the CPU is working on.

Why: Storing data is the role of the registers/main memory, not the control unit, so no point is creditworthy.

2Short recall1 markUnits & Conversion Swap Remove

A file has a size of 2 kibibytes.

State the number of bytes in the file.

[1 mark]
Mark scheme

Award one mark for:

  • 2048 (1)
  • 2 × 1024 (1)
  • 2^11 (1)

Allow 2048 bytes.

Do not accept 2000, which is the number of bytes in two decimal kilobytes.

Do not accept 1024, which is the number of bytes in one kibibyte.

Do not accept 16, which is the number of bits in two bytes.

Example answers and how they were marked
Full marks1/1

2048

Why: 2048 is 2 × 1024, the number of bytes in 2 kibibytes (1).

No marks0/1

2000

Why: 2000 uses the decimal kilobyte, not the binary kibibyte; the mark scheme does not accept it.

No marks0/1

16

Why: 16 is the number of bits in two bytes, confusing bits with bytes; the mark scheme does not accept it.

3Describe2 marksTranslators Swap Remove

A compiler and an interpreter both translate source code.

Describe one difference between what a compiler produces and what an interpreter produces.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • A compiler produces object code/machine code/an executable (file) (1) whereas an interpreter produces no object code/translated file (1)
  • A compiler produces a machine code file (1) that can be run on its own/without the compiler/translator being present (1)
  • An interpreter produces no object code/file (1) because it translates and executes each line instead of saving translated code (1)
  • The compiler's output can be saved/stored (1) and run again later, while interpreted code has to be translated again each time it is run (1)

Allow binary for machine code.

Allow executable/an executable for object code.

Do not accept responses about translating the whole program, reporting errors or the speed of execution.

Do not accept 'the interpreter translates/executes one line at a time' on its own: this is how it translates, not what it produces. It earns the development only when linked to no object code/translated file being produced.

Do not accept the interpreter producing object code/an executable.

Example answers and how they were marked
Full marks2/2

A compiler produces object code, which is saved as a file, whereas an interpreter does not produce a file because it translates and executes each line.

Why: Compiler produces object code (1) contrasted with the interpreter producing no object code/translated file (1).

Some marks1/2

The compiler produces machine code.

Why: Machine code/object code produced (1); there is no contrast with the interpreter, so the development is not earned.

No marks0/2

The interpreter produces object code for each line it translates.

Why: Reverses the translators' outputs: the interpreter produces no object code, so nothing is creditworthy.

4Discuss6 marksPurpose & Function of Operating Systems Swap Remove

A home computer is used to stream music, edit a video and download files at the same time.

Discuss how the operating system manages the processes running on the computer.

Your answer should include:

  • how the CPU is shared between processes
  • the states a process can be in
  • how the operating system responds when a process needs attention
[6 marks]
Mark scheme

Indicative content

How the CPU is shared between processes

  • The operating system uses multitasking to give each process a short time slice on the CPU, so the music, video editor and download appear to run at the same time.
  • The operating system decides which ready process will run next, so one program cannot keep the CPU to itself.
  • The operating system can stop a running process and move it back to ready when its time slice ends, so all processes make progress.

The states a process can be in

  • When a program is opened, the operating system creates a process and moves its instructions into RAM so it is ready.
  • The operating system moves a ready process to running when the CPU is free.
  • A running process becomes blocked when it is waiting for input or data, such as the download waiting for data to arrive.
  • When the process finishes, the operating system terminates it and releases the resources it was using.

How the operating system responds when a process needs attention

  • An interrupt is a signal to the CPU that needs immediate attention, so the operating system suspends the current process and runs the interrupt handler.
  • A hardware interrupt could be a printer out of paper, and a software interrupt could be an error in a program.
  • After the interrupt has been handled, the operating system can return the interrupted process to the CPU.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

  • Level 3 responses must cover at least two of scheduling, process states and interrupts.
  • A response that only states that the OS 'manages processes' or gives a program a turn, without expansion, is limited to Level 1.
Example answers and how they were marked
Full marks6/6

The OS uses multitasking to share the CPU. It gives each process, such as the music player and the video editor, a small time slice so they appear to run at the same time. It decides which ready process is next and how long it runs. When the video editor is opened, the OS creates a process and moves its instructions into RAM so it is ready; when the CPU is free it moves it to running. If the download is waiting for data, the OS marks it blocked so the CPU is not wasted. If the printer runs out of paper, a hardware interrupt tells the CPU to stop and run the interrupt handler; afterwards the OS returns to the process.

Why: Covers scheduling with time slices, process states (ready, running, blocked) and interrupts, with sustained application to the music, video editor and download. Level 3.

Some marks4/6

The operating system uses multitasking so the music and video editor can run at the same time. It gives each program a small amount of time on the CPU. When a program is opened it creates a process and puts it in RAM. If a process is waiting for input it is blocked.

Why: Covers CPU sharing and process states, with some application, but says nothing about interrupts. Level 2.

Some marks1/6

The operating system manages processes by giving each program a turn on the CPU. This stops the computer crashing when too many programs are open.

Why: Gives only a basic, undeveloped point about giving each program a turn, with no linkage or application. Level 1.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 18
Data Protection Act 14 questions Impact of AI 4 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.