Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 7 marks

Pick again
Print
1Multiple choice1 markTranslators Swap Remove

A compiler translates source code into machine code.

Identify why a compiled program can be run on a computer that does not have the compiler installed.

[1 mark]
  • AThe code is translated again each time it is run
  • BThe code is translated one line at a time
  • CThe object code is saved as a separate file
  • DThe source code is saved with the program
Mark scheme
  • C The object code is saved as a separate file (1)
  • The only correct answer is C. The correct answer is the object code is saved as a separate file.
  • A is not correct because a compiled program is not translated again when it is run
  • B is not correct because translating one line at a time is how an interpreter works
  • D is not correct because the source code is not needed to run a compiled program
Example answers and how they were marked
Full marks1/1

C The object code is saved as a separate file

Why: Selected the saved object code, which can be run without the compiler being present (1).

No marks0/1

D The source code is saved with the program

Why: Near miss: it is the object code, not the source code, that is saved and run on another computer.

No marks0/1

B The code is translated one line at a time

Why: Confuses a compiler with an interpreter: a compiled program is translated as a whole and is not translated again when it is run.

2Short recall2 marksLow and High Level Languages Swap Remove

Programs written in a high-level language are often machine independent.

Define the term machine independence.

[2 marks]
Mark scheme

Award one mark for any of the following up to a maximum of two marks:

  • The (same) program/source code can run on different types/makes of computer/processor (1)
  • With few/no changes (to the program code) (1)
  • The same source code can be translated for each type of processor (1)
  • A different compiler/interpreter is used for each type of processor (1)
  • The program does not depend on one specific type of processor/hardware (1)
  • Only one version of the program needs to be written/kept (1)
  • The program is portable between different computers (1)

Allow 'different computers' as meaning different types of computer/processor.

Do not accept a program that will only run on one type of computer / the computer it was written on.

Do not accept written in machine code/binary, is translated into machine code, compiled/interpreted, is a low-level language.

Example answers and how they were marked
Full marks2/2

The same program can run on different types of computer without being changed.

Why: Two creditworthy parts: runs on different types/makes of computer/processor (1); with few/no changes (1).

Some marks1/2

A program can run on different computers.

Why: Creditworthy point: can run on different types/makes of computer/processor (1), with 'different computers' allowed by the guidance. No second part about changes or translation.

No marks0/2

A program is written in machine code so the computer can understand it.

Why: Misconception: machine code is not machine independence; the mark scheme does not accept this, and no other creditworthy point is given.

3Explain2 marksLow and High Level Languages Swap Remove

A programmer writes the same program in a low-level language and in a high-level language.

Explain one reason why the program written in the low-level language may run faster.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The programmer can choose the most efficient instructions/registers to use (1) so the program completes its task in fewer steps (1)
  • The programmer can optimise the code for the processor (1) because low-level instructions give direct control of registers/memory (1)
  • Each low-level instruction maps to one machine code instruction (1) so fewer instructions are executed than for the equivalent high-level code (1)
  • The translated code is smaller (1) so fewer instructions are fetched from memory and executed (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it is low-level' / 'it is closer to machine code' / 'low-level code is faster' on its own without a reason why it makes the program run faster.

Do not accept 'high-level code has to be translated' / 'high-level code is interpreted' on its own without saying why that makes the program slower.

Do not accept 'the code is smaller' on its own without saying that this means fewer instructions are fetched/executed.

Do not accept 'it is easier to write' or 'quicker to type' as a reason for faster execution.

Example answers and how they were marked
Full marks2/2

The programmer can choose the most efficient instructions and registers to use so the program completes its task in fewer steps.

Why: Linked point (1) of choosing efficient instructions/registers and reason (1) that the task is completed in fewer steps, so it runs faster.

Some marks1/2

Each low-level instruction maps to one machine code instruction so the program is shorter to type.

Why: Point (1) that one low-level instruction maps to one machine code instruction, but being shorter to type does not explain why the program runs faster, so no second mark.

No marks0/2

Because it is closer to machine code.

Why: 'Closer to machine code' alone gives no reason why that makes the program run faster, and the mark scheme does not accept it on its own.

4Explain2 marksTranslators Swap Remove

An interpreter translates and executes high-level code.

Explain why an interpreted program must be translated again each time it is run.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • No object code/machine code file is stored/saved (1) so there is no translated program to run on the next occasion (1)
  • The translation is only temporary/is lost when the program ends (1) because each line is translated as the program runs (1)
  • No executable file is created/saved (1) so the whole program has to be translated again every time it is run (1)
  • The interpreter translates each line while the program is running (1) so nothing is kept that could be run without the interpreter (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'it is interpreted' or 'it is not compiled' without saying that no object code/executable is stored/saved.

Do not accept 'the source code is high-level so it must be translated' or 'the source code has to be turned into machine code' on its own, as this is true of any translation.

Do not accept answers about the source code being deleted.

Example answers and how they were marked
Full marks2/2

The interpreter does not store an object code file, so there is no machine code file to run on the next occasion.

Why: No object code stored (1) linked to no translated program for the next run (1).

Some marks1/2

No object code is saved.

Why: Point that nothing is stored (1) but no linked reason saying why this means the program must be translated again.

No marks0/2

It has to be translated again because the interpreter deletes the source code after each run.

Why: Incorrect: the interpreter does not delete the source code; no mark scheme point.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 65
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 12 questions

5.3 Cybersecurity

Malware 8 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.