Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 659 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 6 marks

Pick again
Print
1Multiple choice1 markTranslators Swap Remove

A program contains a syntax error. An interpreter reports the error as soon as it finds it.

Identify when a compiler reports the syntax errors it finds in the source code.

[1 mark]
  • AAfter each line is translated
  • BAt the end of translating the program
  • CWhen the first error is found
  • DWhen the object code is run
Mark scheme
  • B At the end of translating the program (1)
  • The only correct answer is B. The correct answer is at the end of translating the program.
  • A is not correct because a compiler translates the whole program and does not report an error after each line; reporting after each line is how an interpreter behaves
  • C is not correct because a compiler does not stop at the first error; it finishes translating and reports the errors it finds at the end
  • D is not correct because syntax errors are found during translation, before the object code is run
Example answers and how they were marked
Full marks1/1

B At the end of translating the program

Why: Chosen option states that errors are reported once the whole program has been translated, as a compiler does (1).

No marks0/1

A After each line is translated

Why: Near miss: reporting an error after each line is the behaviour of an interpreter, not a compiler, so no mark.

No marks0/1

C When the first error is found

Why: Misconception that a compiler stops and reports at the first error it finds; a compiler reports the errors at the end of translation, so no mark.

2Short recall1 markLow and High Level Languages Swap Remove

A high-level language uses statements that look like English or maths.

State what a single statement in a high-level language is usually translated into.

[1 mark]
Mark scheme

Award one mark for:

  • Several/multiple machine code instructions (1)

The answer must refer to instructions.

Do not accept machine code on its own.

Do not accept binary on its own.

Do not accept 'one or more machine code instructions' as it does not show that one statement becomes several instructions.

Do not accept assembly code/compiled code/low-level code on their own.

Do not accept 'a line of code'/'a statement' as this repeats the question.

Example answers and how they were marked
Full marks1/1

Several machine code instructions

Why: Matches the creditworthy point that one high-level statement translates into several machine code instructions (1).

No marks0/1

Machine code

Why: Near-miss: gives the type of code but not that one statement becomes several instructions; mark scheme does not accept machine code on its own.

No marks0/1

Binary

Why: Misconception: high-level statements are translated into machine code instructions, not just binary; not accepted.

3Describe2 marksTranslators Swap Remove

A high-level program must be translated into machine code before it can be run.

Describe how a compiler and an interpreter differ in when the translated code is executed.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • The interpreter executes each line as soon as it has been translated (1) so translation and execution happen together/at the same time (1)
  • The compiler translates the whole program first (1) and the machine code is run later/separately (1)
  • The interpreter translates the code and runs it while the program is running (1) whereas the compiler does not run the code it produces (1)
  • The compiler produces translated code that is executed only after all the translation has finished (1) but the interpreter executes each line immediately (1)

Allow 'translates one line at a time' where it is linked to executing each line immediately.

Do not accept answers that only state that a compiler is faster/an interpreter is slower, without reference to when execution happens.

Do not accept answers that only give object code, error reporting or portability, without reference to when execution happens.

Do not accept the compiler executing the program as it translates it.

Example answers and how they were marked
Full marks2/2

The compiler translates the code first and the program is executed afterwards, but the interpreter executes each line as soon as it has been translated.

Why: Compiler translates the whole program first and it is executed afterwards (1) and interpreter executes each line as soon as it is translated (1).

Some marks1/2

The interpreter executes each line immediately after translating it.

Why: Correct interpreter timing (1); no comparison with when the compiler's translated code is executed.

No marks0/2

The compiler executes the program line by line as it translates it.

Why: Reverses the two translators; a compiler does not execute the program it translates, so no mark.

4Explain2 marksTranslators Swap Remove

A programmer writes a program in a high-level language. The program is translated by a compiler.

Explain why a compiler must translate the whole program before any of it can be executed.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • The compiler produces object code/machine code for the whole program (1) so there is no complete executable until every line has been translated (1)
  • The compiler translates all the source code before producing the object code (1) so the program cannot start until translation has finished (1)
  • The compiler checks the whole program for errors during translation (1) so all of the source code must be read before an executable can be produced (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'in one go'/'all at once' for the translation point, but this does not earn the second mark unless it is linked to why the program cannot be executed until translation has finished.

A statement that the whole program is translated, with no linked reason about when the program can be executed, earns 1 mark only.

Do not accept 'a compiler is faster' or 'compiled code runs faster' on its own; this does not explain why translation must finish before execution.

Do not accept 'it translates and runs the program one line at a time', as this describes an interpreter.

Example answers and how they were marked
Full marks2/2

A compiler produces object code for the whole program, so there is no complete executable until every line has been translated.

Why: Object code for the whole program (1) linked to there being no complete executable until every line is translated (1).

Some marks1/2

A compiler translates the whole program in one go.

Why: Translation of the whole program only (1); no linked reason about when the program can be executed, so the second mark is not awarded.

No marks0/2

A compiler translates and runs the program one line at a time, so it stops when it finds an error.

Why: Confuses a compiler with an interpreter; nothing about translating the whole program before execution, so no creditworthy point.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 65
Data Protection Act 17 questions Impact of AI 18 questions Intellectual Property 18 questions Software Licences 12 questions

5.3 Cybersecurity

Malware 8 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.